GURUFOCUS.COM » STOCK LIST » Industrials » Construction » Dyna-Mac Holdings Ltd (SGX:NO4) » Definitions » WACC %

Dyna-Mac Holdings (SGX:NO4) WACC % :9.97% (As of Dec. 14, 2024)


View and export this data going back to 2011. Start your Free Trial

What is Dyna-Mac Holdings WACC %?

As of today (2024-12-14), Dyna-Mac Holdings's weighted average cost of capital is 9.97%%. Dyna-Mac Holdings's ROIC % is 0.00% (calculated using TTM income statement data). Dyna-Mac Holdings earns returns that do not match up to its cost of capital. It will destroy value as it grows.

For a comprehensive WACC calculation, please access the WACC Calculator.


Dyna-Mac Holdings WACC % Historical Data

The historical data trend for Dyna-Mac Holdings's WACC % can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

* Premium members only.

Dyna-Mac Holdings WACC % Chart

Dyna-Mac Holdings Annual Data
Trend Dec14 Dec15 Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23
WACC %
Get a 7-Day Free Trial Premium Member Only Premium Member Only 5.59 6.43 5.99 7.94 3.77

Dyna-Mac Holdings Semi-Annual Data
Dec14 Jun15 Dec15 Jun16 Dec16 Jun17 Dec17 Jun18 Dec18 Jun19 Dec19 Jun20 Dec20 Jun21 Dec21 Jun22 Dec22 Jun23 Dec23 Jun24
WACC % Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 7.42 7.94 0.42 3.77 7.19

Competitive Comparison of Dyna-Mac Holdings's WACC %

For the Engineering & Construction subindustry, Dyna-Mac Holdings's WACC %, along with its competitors' market caps and WACC % data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Dyna-Mac Holdings's WACC % Distribution in the Construction Industry

For the Construction industry and Industrials sector, Dyna-Mac Holdings's WACC % distribution charts can be found below:

* The bar in red indicates where Dyna-Mac Holdings's WACC % falls into.



Dyna-Mac Holdings WACC % Calculation

The weighted average cost of capital (WACC) is the rate that a company is expected to pay on average to all its security holders to finance its assets. The WACC is commonly referred to as the firm's cost of capital. Generally speaking, a company's assets are financed by debt and equity. WACC is the average of the costs of these sources of financing, each of which is weighted by its respective use in the given situation. By taking a weighted average, we can see how much interest the company has to pay for every dollar it finances.

WACC=E/(E + D)*Cost of Equity+D/(E + D)*Cost of Debt*(1 - Tax Rate)

1. Weights:
Generally speaking, a company's assets are financed by debt and equity. We need to calculate the weight of equity and the weight of debt.
The market value of equity (E) is also called "Market Cap". As of today, Dyna-Mac Holdings's market capitalization (E) is S$830.714 Mil.
The market value of debt is typically difficult to calculate, therefore, GuruFocus uses book value of debt (D) to do the calculation. It is simplified by adding the latest one-year semi-annual average Short-Term Debt & Capital Lease Obligation and Long-Term Debt & Capital Lease Obligation together. As of Jun. 2024, Dyna-Mac Holdings's latest one-year semi-annual average Book Value of Debt (D) is S$40.9397 Mil.
a) weight of equity = E / (E + D) = 830.714 / (830.714 + 40.9397) = 0.953
b) weight of debt = D / (E + D) = 40.9397 / (830.714 + 40.9397) = 0.047

2. Cost of Equity:
GuruFocus uses Capital Asset Pricing Model (CAPM) to calculate the required rate of return. The formula is:
Cost of Equity = Risk-Free Rate of Return + Beta of Asset * (Expected Return of the Market - Risk-Free Rate of Return)
a) GuruFocus uses 10-Year Treasury Constant Maturity Rate as the risk-free rate. It is updated daily. The current risk-free rate is 4.395%. Please go to Economic Indicators page for more information. Please note that we use the 10-Year Treasury Constant Maturity Rate of the country/region where the company is headquartered. If the data for that country/region is not available, then we will use the 10-Year Treasury Constant Maturity Rate of the United States as default.
b) Beta is the sensitivity of the expected excess asset returns to the expected excess market returns. Dyna-Mac Holdings's beta is 1.00.
c) (Expected Return of the Market - Risk-Free Rate of Return) is also called market premium. GuruFocus requires market premium to be 6%.
Cost of Equity = 4.395% + 1.00 * 6% = 10.395%

3. Cost of Debt:
GuruFocus uses latest TTM Interest Expense divided by the latest one-year semi-annual average debt to get the simplified cost of debt.
As of Jun. 2024, Dyna-Mac Holdings's interest expense (positive number) was S$0.575 Mil. Its total Book Value of Debt (D) is S$40.9397 Mil.
Cost of Debt = 0.575 / 40.9397 = 1.4045%.

4. Multiply by one minus TTM Tax Rate:
GuruFocus uses the most recent TTM Tax Expense divided by the most recent TTM Pre-Tax Income to calculate the tax rate. The calculated TTM tax rate is limited to between 0% and 100%. If the calculated tax rate is higher than 100%, it is set to 100%. If the calculated tax rate is less than 0%, it is set to 0%.
The latest calculated TTM Tax Rate = 6.857 / 64.138 = 10.69%.

Dyna-Mac Holdings's Weighted Average Cost Of Capital (WACC) for Today is calculated as:

WACC=E / (E + D)*Cost of Equity+D / (E + D)*Cost of Debt*(1 - Tax Rate)
=0.953*10.395%+0.047*1.4045%*(1 - 10.69%)
=9.97%

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.


Dyna-Mac Holdings  (SGX:NO4) WACC % Explanation

Because it costs money to raise capital. A firm that generates higher ROIC % than it costs the company to raise the capital needed for that investment is earning excess returns. A firm that expects to continue generating positive excess returns on new investments in the future will see its value increase as growth increases, whereas a firm that earns returns that do not match up to its cost of capital will destroy value as it grows.

As of today, Dyna-Mac Holdings's weighted average cost of capital is 9.97%%. Dyna-Mac Holdings's ROIC % is 0.00% (calculated using TTM income statement data). Dyna-Mac Holdings earns returns that do not match up to its cost of capital. It will destroy value as it grows.


Be Aware

1. GuruFocus uses book value of debt (D) to do the calculation. It is simplified by adding latest one-year semi-annual average Short-Term Debt & Capital Lease Obligation and Long-Term Debt & Capital Lease Obligation together.
For companies that report quarterly, GuruFocus combines all of the most recent year's quarterly debt data from the beginning of the year to the year-end and calculates the average.
For companies that report semi-annually, GuruFocus combines all of the most recent year's semi-annual debt data from the start of the year to the year-end and calculates the average.
For companies that report annually, GuruFocus combines the beginning and ending annual debt data from the most recent year and then calculates the average.

2. The WACC formula discussed above does not include Preferred Stock. Please adjust if preferred stock is considered.

3. (Expected Return of the Market - Risk-Free Rate of Return) is also called market premium. GuruFocus requires market premium to be 6%.

4. GuruFocus uses the latest TTM Interest Expense divided by the latest one-year semi-annual average debt to get the simplified cost of debt.


Related Terms

Dyna-Mac Holdings Business Description

Traded in Other Exchanges
N/A
Address
45 Gul Road, Singapore, SGP, 629350
Dyna-Mac Holdings Ltd is an investment holding company engaged in providing services for the marine and oil and gas industries. It provides engineering, fabrication, and construction of offshore FPSO (floating production storage offloading) and FSO (floating storage offloading) topside modules as well as onshore plants and other sub-sea products for the oil and gas industries. The operating segments of the group are Module business and Ad-hoc projects. It derives maximum revenue from the Module business segment and involves detailed engineering, procurement, and construction of topside modules for FPSOs and F-LNG (floating liquefied natural gas). The group operates in the Asia Pacific, Europe, and the Americas, of which maximum revenue is generated in Europe.

Dyna-Mac Holdings Headlines

No Headlines