GURUFOCUS.COM » STOCK LIST » Industrials » Industrial Products » Enpro Inc (NYSE:NPO) » Definitions » Owner Earnings per Share (TTM)

Enpro (NPO) Owner Earnings per Share (TTM) : 6.07 (As of Dec. 2023)


View and export this data going back to 2002. Start your Free Trial

What is Enpro Owner Earnings per Share (TTM)?

In 1986 Berkshire Hathaway Shareholder Letter, Warren Buffett defined owner earnings as follows:

"These represent (a) reported earnings plus (b) depreciation, depletion, amortization, and certain other non-cash charges...less (c) the average annual amount of capitalized expenditures for plant and equipment, etc. that the business requires to fully maintain its long-term competitive position and its unit volume (If the business requires additional working capital to maintain its competitive position and unit volume, the increment also should be included in (c))...Our owner-earnings equation does not yield the deceptively precise figures provided by GAAP, since (c) must be a guess - and one sometimes very difficult to make. Despite this problem, we consider the owner earnings figure, not the GAAP figure, to be the relevant item for valuation purposes - both for investors in buying stocks and for managers in buying entire businesses...All of this points up the absurdity of the 'cash flow' numbers that are often set forth in Wall Street reports. These numbers routinely include (a) plus (b) - but do not subtract (c)."

Enpro's Owner Earnings per Share (TTM) ended in Dec. 2023 was $6.07. It's Price-to-Owner-Earnings ratio for today is 24.82.


The historical rank and industry rank for Enpro's Owner Earnings per Share (TTM) or its related term are showing as below:

NPO' s Price-to-Owner-Earnings Range Over the Past 10 Years
Min: 2.48   Med: 11.58   Max: 276.48
Current: 24.82


During the past 13 years, the highest Price-to-Owner-Earnings ratio of Enpro was 276.48. The lowest was 2.48. And the median was 11.58.


NPO's Price-to-Owner-Earnings is ranked worse than
52.99% of 1372 companies
in the Industrial Products industry
Industry Median: 23.105 vs NPO: 24.82

Enpro's Earnings per Share (Diluted) for the three months ended in Dec. 2023 was $-0.23. Its Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Dec. 2023 was $1.06. It's PE Ratio ratio for today is 142.11.

Enpro's EPS without NRI for the three months ended in Dec. 2023 was $1.19. Its EPS without NRI for the trailing twelve months (TTM) ended in Dec. 2023 was $6.55. It's PE Ratio without NRI ratio for today is 23.00.


Enpro Owner Earnings per Share (TTM) Historical Data

The historical data trend for Enpro's Owner Earnings per Share (TTM) can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

* Premium members only.

Enpro Owner Earnings per Share (TTM) Chart

Enpro Annual Data
Trend Dec14 Dec15 Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23
Owner Earnings per Share (TTM)
Get a 7-Day Free Trial Premium Member Only Premium Member Only 4.03 8.73 11.37 9.96 6.07

Enpro Quarterly Data
Mar19 Jun19 Sep19 Dec19 Mar20 Jun20 Sep20 Dec20 Mar21 Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23
Owner Earnings per Share (TTM) Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 9.96 10.36 8.15 9.29 6.07

Competitive Comparison of Enpro's Owner Earnings per Share (TTM)

For the Specialty Industrial Machinery subindustry, Enpro's Price-to-Owner-Earnings, along with its competitors' market caps and Price-to-Owner-Earnings data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Enpro's Price-to-Owner-Earnings Distribution in the Industrial Products Industry

For the Industrial Products industry and Industrials sector, Enpro's Price-to-Owner-Earnings distribution charts can be found below:

* The bar in red indicates where Enpro's Price-to-Owner-Earnings falls into.



Enpro Owner Earnings per Share (TTM) Calculation

In 1986 Berkshire Hathaway Shareholder Letter, Warren Buffett defined owner earnings as follows:

"These represent (a) reported earnings plus (b) depreciation, depletion, amortization, and certain other non-cash charges...less (c) the average annual amount of capitalized expenditures for plant and equipment, etc. that the business requires to fully maintain its long-term competitive position and its unit volume. (If the business requires additional working capital to maintain its competitive position and unit volume, the increment also should be included in (c))...Our owner-earnings equation does not yield the deceptively precise figures provided by GAAP, since (c) must be a guess - and one sometimes very difficult to make. Despite this problem, we consider the owner earnings figure, not the GAAP figure, to be the relevant item for valuation purposes - both for investors in buying stocks and for managers in buying entire businesses...All of this points up the absurdity of the 'cash flow' numbers that are often set forth in Wall Street reports. These numbers routinely include (a) plus (b) - but do not subtract (c)."

To make it simple, then you will have:

Owner Earnings per Share (TTM) = (Net Income + Depreciation, Depletion and Amortization + Change In Deferred Tax - 5Y Average of Maintenance Capital Expenditure + Change In Working Capital) / Shares Outstanding (Diluted Average)

Enpro's Owner Earnings per Share (TTM) Calculation:

TTM / Last Quarter Average of Last 20 Quarters
Net Income 22
Depreciation, Depletion and Amortization 95
Change In Deferred Tax -11
5Y Average of Maintenance Capital Expenditure 21
Change In Working Capital 43
Shares Outstanding (Diluted Average) 21

1. Start with "Net Income" from income statement. Enpro's Net Income for the trailing twelve months (TTM) ended in Dec. 2023 was $22 Mil.

2. "Depreciation, Depletion and Amortization" is from cashflow statement. Enpro's Depreciation, Depletion and Amortization for the trailing twelve months (TTM) ended in Dec. 2023 was $95 Mil. This needs to be added back because company does not actually need to pay cash for it. It is a non-cash item.

3. Other non-cash charges usually include "Stock Based Compensation" and "Change In Deferred Tax":
However, to be conservative, GuruFocus will not add Stock Based Compensation back to net income. Enpro's Change In Deferred Tax for the trailing twelve months (TTM) ended in Dec. 2023 was $-11 Mil.

4. Average maintenance capital expenditure over a business/industry cycle: 5-Year Average Maintenance Capital Expenditure = $21 Mil

It is usually best to take a long-term average of maintenance capital expenditure. Ideally this would be as long as 10 years and include at least one economic downturn. However, since many companies do not have as long as 10-year history, here GuruFocus uses the latest 5 years data to do the calculation. To smooth out unusual years but reflect recent developments, we take an average of the 5 year maintenance capital expenditure.

The following shows how to get maintenance capital expenditure.

First, calculate the revenue change regarding to the previous quarter. If the revenue decreased from the previous quarter, then the Maintenance Capital Expenditure = Capital Expenditure (positive).
Second, if the revenue increased from the previous quarter, then calculate the percentage of Net PPE as of corresponding Revenue.
Growth Capital Expenditure = Percentage of Property, Plant and Equipment as of corresponding Revenue * Revenue Increase
Third, calculate Capital Expenditure (positive) - Growth Capital Expenditure.
If [Capital Expenditure (positive) - Growth Capital Expenditure] was negative, then the Maintenance Capital Expenditure = Capital Expenditure (positive).
If [Capital Expenditure (positive) - Growth Capital Expenditure] was positive, then the Maintenance Capital Expenditure = Capital Expenditure (positive) - Growth Capital Expenditure.
Fourth, get the average of the 5 years maintenance capital expenditure.

Enpro's 5-Year Average Maintenance Capital Expenditure = $21 Mil

5. "Change In Working Capital" is from cashflow statement. Enpro's Change In Working Capital for the trailing twelve months (TTM) ended in Dec. 2023 was $43 Mil.
Note: GuruFocus' Change in Working Capital is provided by Morningstar. It is calculated by adding the items under "Change in operating assets and liabilities" (may refer to a different name for different company) section in Cash Flow Statement from original financial report. And sometimes it includes non-current parts of assets and liabilities.

6. Enpro's Shares Outstanding (Diluted Average) for the months ended in Dec. 2023 was 21.000 Mil.

Enpro's Onwer Earnings Per Share for Dec. 2023 is calculated as:

Owner Earnings per Share (TTM)
=( Net Income+Depreciation, Depletion and Amortization+Change In Deferred Tax
=( 22.2 +94.5+-11
-5Y Avg of Maintenance CAPEX+Change In Working Capital )/Shares Outstanding (Diluted Average)
-21.025344791803+42.8)/21.000
=6.07

Price-to-Owner-Earnings=Current Price/Owner Earnings per Share (TTM)
=150.64/6.07
=24.82

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.


Be Aware

Assumption: Companies usually do not report maintenance capital expenditures and growth capital expenditures separately. Here we use estimated numbers and average them over 5 years. The method to estimate maintenance capital expenditures can be found in above part 4.

Note: GuruFocus' Change In Working Capital is provided by Morningstar. It is calculated by adding the items under "Change in operating assets and liabilities" (may refer to a different name for different company) section in Cash Flow Statement from original financial report. And it includes non-current parts of assets and liabilities.


Enpro Owner Earnings per Share (TTM) Related Terms

Thank you for viewing the detailed overview of Enpro's Owner Earnings per Share (TTM) provided by GuruFocus.com. Please click on the following links to see related term pages.


Enpro (NPO) Business Description

Industry
Traded in Other Exchanges
Address
5605 Carnegie Boulevard, Suite 500, Charlotte, NC, USA, 28209
Enpro Inc formerly EnPro Industries Inc is a United States-based company that designs, develops, manufactures, and markets proprietary engineered industrial products. The company operates through three segments: Sealing Technologies, which manufactures and markets sealing products, wheel-end components & systems, and others; Advanced Surface Technologies manufactures wafer processing sub-systems, thin-film coatings, optical filters, and other services like cleaning, coating, testing, refurbishment, and verification services; Engineered Materials manufactures components for reciprocating compressors & engines, metal-polymer, engineered plastics, composite bearing products, and others. Its geographical segments are United States, Europe, and other foreign countries.
Executives
Steven R. Bower officer: Vice President 5605 CARNEGIE BLVD. SUITE 500, CHARLOTTE NC 28209
Meredith Manz officer: SVP & CHRO 5605 CARNEGIE BOULEVARD, SUITE 500, CHARLOTTE NC 28209
Eric A. Vaillancourt officer: division president 5605 CARNEGIE BLVD. SUITE 500, CHARLOTTE NC 28209
Ronald C Keating director EVOQUA WATER TECHNOLOGIES CORP., 210 SIXTH AVENUE, PITTSBURGH PA 15222
Childress John M Ii officer: VP Strategic Planning&Bus C/O ENPRO INDUSTRIES, INC., 5605 CARNEGIE BLVD., SUITE 500, CHARLOTTE NC 28209
William Abbey director 5605 CARNEGIE BOULEVARD, SUITE 500, CHARLOTTE NC 28209
Felix M. Brueck director 5605 CARNEGIE BLVD. SUITE 500, CHARLOTTE NC 28209
Judith A Reinsdorf director C. R. BARD, INC., 730 CENTRAL AVENUE, MURRAY HILL NJ 07974
Thomas M. Botts director 5605 CARNEGIE BLVD. SUITE 500, CHARLOTTE NC 28209
John Humphrey director ENPRO INDUSTRIES, INC., 5605 CARNEGIE BLVD., SUITE 500, CHARLOTTE NC 28209
Jerry Lavell Johnson officer: SVP, Strategy, Corp Dev & IR 512 HERNDON PARKWAY, SUITE A, HERNDON VA 20170
Ron Angelillo officer: VP, Tax 5605 CARNEGIE BLVD., SUITE 500, CHARLOTTE NC 28209
Stephen E. Macadam director, officer: President and CEO C/O ENPRO INDUSTRIES, INC., 5605 CARNEGIE BLVD., STE. 500, CHARLOTTE NC 28209
Adele M. Gulfo director ONE NEENAH CENTER, 4TH FLOOR, P.O. BOX 669, NEENAH WI 54957
Jon D. Rickers officer: VP, HR 5605 CARNEGIE BLVD., SUITE 500, CHARLOTTE NC 28209