GURUFOCUS.COM » STOCK LIST » Technology » Hardware » STEC, Inc. (FRA:XTC) » Definitions » Beneish M-Score

STEC, (FRA:XTC) Beneish M-Score : 0.00 (As of May. 27, 2024)


View and export this data going back to . Start your Free Trial

What is STEC, Beneish M-Score?

The zones of discrimination for M-Score is as such:

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator.
An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

The historical rank and industry rank for STEC,'s Beneish M-Score or its related term are showing as below:

During the past 13 years, the highest Beneish M-Score of STEC, was 0.00. The lowest was 0.00. And the median was 0.00.


STEC, Beneish M-Score Historical Data

The historical data trend for STEC,'s Beneish M-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

* Premium members only.

STEC, Beneish M-Score Chart

STEC, Annual Data
Trend Dec03 Dec04 Dec05 Dec06 Dec07 Dec08 Dec09 Dec10 Dec11 Dec12
Beneish M-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only -1.46 -2.39 -2.78 -3.16 -4.23

STEC, Quarterly Data
Sep08 Dec08 Mar09 Jun09 Sep09 Dec09 Mar10 Jun10 Sep10 Dec10 Mar11 Jun11 Sep11 Dec11 Mar12 Jun12 Sep12 Dec12 Mar13 Jun13
Beneish M-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only -4.56 -5.24 -4.23 -4.82 -3.75

Competitive Comparison of STEC,'s Beneish M-Score

For the Computer Hardware subindustry, STEC,'s Beneish M-Score, along with its competitors' market caps and Beneish M-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


STEC,'s Beneish M-Score Distribution in the Hardware Industry

For the Hardware industry and Technology sector, STEC,'s Beneish M-Score distribution charts can be found below:

* The bar in red indicates where STEC,'s Beneish M-Score falls into.



STEC, Beneish M-Score Calculation

The M-score was created by Professor Messod Beneish. Instead of measuring the bankruptcy risk (Altman Z-Score) or business trend (Piotroski F-Score), M-score can be used to detect the risk of earnings manipulation. This is the original research paper on M-score.

The M-Score Variables:

The M-score of STEC, for today is based on a combination of the following eight different indices:

M=-4.84+0.92 * DSRI+0.528 * GMI+0.404 * AQI+0.892 * SGI+0.115 * DEPI
=-4.84+0.92 * 0.3434+0.528 * 1.2629+0.404 * 2.3512+0.892 * 0.5623+0.115 * 0.8837
-0.172 * SGAI+4.679 * TATA-0.327 * LVGI
-0.172 * 2.2911+4.679 * -0.175024-0.327 * 0.7715
=-3.77

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Jun13) TTM:Last Year (Jun12) TTM:
Total Receivables was €6.25 Mil.
Revenue was 17.778 + 17.003 + 26.773 + 32.633 = €94.19 Mil.
Gross Profit was 4.975 + 4.549 + 8.614 + 12.07 = €30.21 Mil.
Total Current Assets was €131.43 Mil.
Total Assets was €162.65 Mil.
Property, Plant and Equipment(Net PPE) was €22.24 Mil.
Depreciation, Depletion and Amortization(DDA) was €10.34 Mil.
Selling, General, & Admin. Expense(SGA) was €62.39 Mil.
Total Current Liabilities was €25.50 Mil.
Long-Term Debt & Capital Lease Obligation was €0.00 Mil.
Net Income was -23.039 + -19.661 + -17.644 + -15.352 = €-75.70 Mil.
Non Operating Income was -0.02 + 0.032 + 0.626 + 0.764 = €1.40 Mil.
Cash Flow from Operations was -11.662 + -6.687 + -16.26 + -14.022 = €-48.63 Mil.
Total Receivables was €32.34 Mil.
Revenue was 32.442 + 38.164 + 44.183 + 52.729 = €167.52 Mil.
Gross Profit was 11.867 + 13.696 + 18.145 + 24.145 = €67.85 Mil.
Total Current Assets was €230.15 Mil.
Total Assets was €264.81 Mil.
Property, Plant and Equipment(Net PPE) was €28.45 Mil.
Depreciation, Depletion and Amortization(DDA) was €11.09 Mil.
Selling, General, & Admin. Expense(SGA) was €48.44 Mil.
Total Current Liabilities was €53.81 Mil.
Long-Term Debt & Capital Lease Obligation was €0.00 Mil.




1. DSRI = Days Sales in Receivables Index

Measured as the ratio of Revenue in Total Receivables in year t to year t-1.

A large increase in DSR could be indicative of revenue inflation.

DSRI=(Receivables_t / Revenue_t) / (Receivables_t-1 / Revenue_t-1)
=(6.245 / 94.187) / (32.343 / 167.518)
=0.066304 / 0.193072
=0.3434

2. GMI = Gross Margin Index

Measured as the ratio of gross margin in year t-1 to gross margin in year t.

Gross margin has deteriorated when this index is above 1. A firm with poorer prospects is more likely to manipulate earnings.

GMI=GrossMargin_t-1 / GrossMargin_t
=(GrossProfit_t-1 / Revenue_t-1) / (GrossProfit_t / Revenue_t)
=(67.853 / 167.518) / (30.208 / 94.187)
=0.405049 / 0.320724
=1.2629

3. AQI = Asset Quality Index

AQI is the ratio of asset quality in year t to year t-1.

Asset quality is measured as the ratio of non-current assets other than Property, Plant and Equipment to Total Assets.

AQI=(1 - (CurrentAssets_t + PPE_t) / TotalAssets_t) / (1 - (CurrentAssets_t-1 + PPE_t-1) / TotalAssets_t-1)
=(1 - (131.427 + 22.244) / 162.646) / (1 - (230.145 + 28.452) / 264.812)
=0.055181 / 0.023469
=2.3512

4. SGI = Sales Growth Index

Ratio of Revenue in year t to sales in year t-1.

Sales growth is not itself a measure of manipulation. However, growth companies are likely to find themselves under pressure to manipulate in order to keep up appearances.

SGI=Sales_t / Sales_t-1
=Revenue_t / Revenue_t-1
=94.187 / 167.518
=0.5623

5. DEPI = Depreciation Index

Measured as the ratio of the rate of Depreciation, Depletion and Amortization in year t-1 to the corresponding rate in year t.

DEPI greater than 1 indicates that assets are being depreciated at a slower rate. This suggests that the firm might be revising useful asset life assumptions upwards, or adopting a new method that is income friendly.

DEPI=(Depreciation_t-1 / (Depreciaton_t-1 + PPE_t-1)) / (Depreciation_t / (Depreciaton_t + PPE_t))
=(11.089 / (11.089 + 28.452)) / (10.341 / (10.341 + 22.244))
=0.280443 / 0.317355
=0.8837

Note: If the Depreciation, Depletion and Amortization data is not available, we assume that the depreciation rate is constant and set the Depreciation Index to 1.

6. SGAI = Sales, General and Administrative expenses Index

The ratio of Selling, General, & Admin. Expense(SGA) to Sales in year t relative to year t-1.

SGA expenses index > 1 means that the company is becoming less efficient in generate sales.

SGAI=(SGA_t / Sales_t) / (SGA_t-1 /Sales_t-1)
=(62.394 / 94.187) / (48.437 / 167.518)
=0.662448 / 0.289145
=2.2911

7. LVGI = Leverage Index

The ratio of total debt to Total Assets in year t relative to yeat t-1.

An LVGI > 1 indicates an increase in leverage

LVGI=((LTD_t + CurrentLiabilities_t) / TotalAssets_t) / ((LTD_t-1 + CurrentLiabilities_t-1) / TotalAssets_t-1)
=((0 + 25.498) / 162.646) / ((0 + 53.809) / 264.812)
=0.15677 / 0.203197
=0.7715

8. TATA = Total Accruals to Total Assets

Total accruals calculated as the change in working capital accounts other than cash less depreciation.

TATA=(IncomefromContinuingOperations_t - CashFlowsfromOperations_t) / TotalAssets_t
=(NetIncome_t - NonOperatingIncome_t - CashFlowsfromOperations_t) / TotalAssets_t
=(-75.696 - 1.402 - -48.631) / 162.646
=-0.175024

An M-Score of equal or less than -1.78 suggests that the company is unlikely to be a manipulator. An M-Score of greater than -1.78 signals that the company is likely to be a manipulator.

STEC, has a M-score of -3.77 suggests that the company is unlikely to be a manipulator.


STEC, (FRA:XTC) Business Description

Traded in Other Exchanges
N/A
Address
STEC, Inc., was incorporated in 1990 in the state of California. It provides enterprise-class Flash solid-state drives that are designed to increase the performance of enterprise-storage systems and servers that companies use to retain and access their critical data. Its products are designed for storage systems and servers that run applications requiring a high level of input/output operations per second ('IOPS') performance, capacity, reliability and low latency. The Company designs and develops its SSD controllers, enhance them with proprietary firmware and combine them with third-party Flash memory to form high-performance SSDs which provide a level of IOPS performance not currently possible with traditional hard disk drives ('HDDs'). The Company sells its SSDs to global storage and server original equipment manufacturers ('OEMs') which integrate them into storage systems and servers used by enterprises in a variety of industries including financial services, government, transportation, defense and aerospace, and transaction processing. It also manufactures small form factor Flash SSDs, cards and modules, as well as custom high density dynamic random access memory ('DRAM') modules for networking, communications and industrial applications. The Company markets its products to OEMs, leveraging its comprehensive design capabilities to offer custom storage solutions to address their specific needs. A major area of its Flash-based product investment has been applied to SSD technology. It also offers both monolithic DRAM modules and DRAM modules based on its proprietary stacking technology. The Company also offers both monolithic DRAM modules and DRAM modules based on its proprietary stacking technology. The Company's ZeusIOPS SSDs are high performance enterprise-class data storage solutions. Its MACH-class SSDs are small form factor, high throughput storage solutions for mission-critical systems in a variety of industries. The Company's Industrial Grade Advanced Technology Attachment ('ATA') PC Cards are viable alternatives to HDDs due to their high reliability and low cost per useable megabyte. CompactFlash products provide full PC Card ATA functionality but are only one-fourth the size of a standard PC Card. Its flash module products include USB and Serial ATA interfaces and are targeted toward embedded systems where device footprint and low power are critical design parameters. The Company's Secure Digital ('SD') Flash Memory Cards are small, removable and non-volatile flash memory with a high performance interface. Its USB flash drive built upon an industrial-grade flash controller technology has capacity of 1GB to 8GB, its USB Flash Drive couples convenience and portability with performance and reliability. The Company offers DRAM products, including dual in-line memory modules ('DIMMs'), small-outline DIMMs, mini-registered DIMMs, very low profile registered DIMMs ('VLP RDIMMs') and Fully-Buffered DIMMs ('FB-DIMMs'). Its pat

STEC, (FRA:XTC) Headlines

No Headlines