Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
HKSE:00661's PB Ratio is ranked better than 88.53% of 2372
companies
in the Metals & Mining industry
Industry Median: 2.39
vs HKSE:00661: 0.68
During the past 12 months, China Daye Non-Ferrous Metals Mining's average Book Value Per Share Growth Rate was 5.40% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 0.20% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 0.20% per year.
During the past 10 years, the average Book Value Per Share Growth Rate was 2.40% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of China Daye Non-Ferrous Metals Mining was 164.80% per year. The lowest was -23.60% per year. And the median was 0.15% per year.
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
China Daye Non-Ferrous Metals Mining PB Ratio Related Terms
China Daye Non-Ferrous Metals Mining PB Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
China Daye Non-Ferrous Metals Mining PB Ratio Chart
For the Copper subindustry, China Daye Non-Ferrous Metals Mining's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
China Daye Non-Ferrous Metals Mining PB Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, China Daye Non-Ferrous Metals Mining's PB Ratio distribution charts can be found below:
* The bar in red indicates where China Daye Non-Ferrous Metals Mining's PB Ratio falls into.
China Daye Non-Ferrous Metals Mining PB Ratio Calculation
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
China Daye Non-Ferrous Metals Mining (HKSE:00661) has a PB Ratio of 0.68 as of Sep. 07, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on China Daye Non-Ferrous Metals Mining and its competitors. This is 70% above median its historical median of 0.40. Over the past decade, China Daye Non-Ferrous Metals Mining's PB Ratio has ranged from 0.23 to 1.09. According to the industry distribution chart, China Daye Non-Ferrous Metals Mining ranks #272 out of 2372 companies in the Metals & Mining industry, placing it in the top 11.5%.
Is China Daye Non-Ferrous Metals Mining's PB Ratio too high?
China Daye Non-Ferrous Metals Mining's current PB Ratio of 0.68 is 70% above median its 10-year median of 0.40. Over the past 10 years, this metric has ranged from a low of 0.23 to a high of 1.09. The Metals & Mining industry median PB Ratio is 2.39. China Daye Non-Ferrous Metals Mining's value of 0.68 is 71.5% below this industry median. Based on the distribution chart, China Daye Non-Ferrous Metals Mining ranks #272 out of 2372 companies in the Metals & Mining industry, which is in the top quartile — a strong position relative to peers. Overall, China Daye Non-Ferrous Metals Mining has a GF Score™ of 54/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does China Daye Non-Ferrous Metals Mining's PB Ratio compare to SCCO and FCX?
According to the Metals & Mining industry distribution chart, China Daye Non-Ferrous Metals Mining ranks #272 out of 2372 companies for PB Ratio. This places China Daye Non-Ferrous Metals Mining in the top 12% of its industry — outperforming the majority of peers. The industry median PB Ratio is 2.39. China Daye Non-Ferrous Metals Mining's value of 0.68 is 71.5% below this benchmark. Historically, China Daye Non-Ferrous Metals Mining's own PB Ratio has ranged from 0.23 to 1.09 over the past decade. While the company's 10-year median is 0.40 vs. the industry median of 2.39, China Daye Non-Ferrous Metals Mining has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for a Metals & Mining company?
The median PB Ratio among Metals & Mining companies is 2.39, based on 2,372 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. China Daye Non-Ferrous Metals Mining's current PB Ratio of 0.68 is 71.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on China Daye Non-Ferrous Metals Mining and its competitors. For the Metals & Mining industry, the median PB Ratio is 2.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. China Daye Non-Ferrous Metals Mining's current PB Ratio is 0.68, which is 70% above median its own 10-year median of 0.40. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is China Daye Non-Ferrous Metals Mining stock overvalued right now?
Based on GuruFocus' analysis, China Daye Non-Ferrous Metals Mining (HKSE:00661) is currently considered Modestly Overvalued. The stock's GF Value™ is HK$0.12, compared to a current price of HK$0.16 — trading 30.8% above its estimated fair value. The current PB Ratio is 0.68, which is 70% above median its 10-year median of 0.40 and 71.5% below the Metals & Mining industry median of 2.39. China Daye Non-Ferrous Metals Mining's overall GF Score™ is 54/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For China Daye Non-Ferrous Metals Mining (HKSE:00661), the current PB Ratio is 0.68 as of Sep. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is China Daye Non-Ferrous Metals Mining (HKSE:00661) Overvalued in 2026?
Based on GuruFocus' analysis, China Daye Non-Ferrous Metals Mining stock appears to be overvalued.
The current stock price of HK$0.16 is trading 30.8% above its estimated GF Value™ of HK$0.12.
GuruFocus considers China Daye Non-Ferrous Metals Mining to be Modestly Overvalued.
Key valuation signals for HKSE:00661:
PB Ratio: 0.68 (70% above median its 10-year median of 0.40)
GF Value™: HK$0.12 vs. price of HK$0.16 (30.8% above fair value)
Industry Position: 71.5% below the Metals & Mining median (#272 of 2372)
No single metric tells the full story. See the HKSE:00661 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
China Daye Non-Ferrous Metals Mining Ltd is principally engaged in investment holding. The Company is principally engaged in mining and processing of mineral ores and selling/trading of metal products. The company's products are Copper cathodes, Other copper products, Gold and other gold products, Silver and other silver products, Sulphuric acid and sulphuric concentrate, Iron ores, Copper sulphate, and Others. The services includes Copper processing, and others. The company has presence in Mainland China, Hong Kong, and Others.
54GF Score
Get the complete analysis for HKSE:00661
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
HKSE:00661 has been successfully added to your 
