Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Mega Flex PlasticsNSE:MEGAFLEX 67 PB Ratio is 2.04 as of Jul. 14, 2026, which is 70% above its 10-year median of 1.20. GuruFocus rates NSE:MEGAFLEX with a GF Score™ of 67/100 and a GF Value™ of ₹73.11 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 388 Packaging & Containers companies, Mega Flex Plastics ranks worse than 71.91% on this metric.
The historical rank and industry rank for Mega Flex Plastics's PB Ratio or its related term are showing as below:
NSE:MEGAFLEX'
s PB Ratio Range Over the Past 10 Years
Min: 0.65 Med: 1.2 Max: 3.4
Current: 2.04
During the past 7 years, Mega Flex Plastics's highest PB Ratio was 3.40. The lowest was 0.65. And the median was 1.20.
NSE:MEGAFLEX's PB Ratio is ranked worse than 71.91% of 388
companies
in the Packaging & Containers industry
Industry Median: 1.18
vs NSE:MEGAFLEX: 2.04
During the past 12 months, Mega Flex Plastics's average Book Value Per Share Growth Rate was 13.20% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 7.30% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 14.50% per year.
During the past 7 years, the highest 3-Year average Book Value Per Share Growth Rate of Mega Flex Plastics was 18.20% per year. The lowest was 7.30% per year. And the median was 17.00% per year.
Back to Basics: PB Ratio
Mega Flex Plastics (NSE:MEGAFLEX) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
Mega Flex Plastics PB Ratio Related Terms
Mega Flex Plastics PB Ratio Historical Data
* Premium members only.
The historical data trend for Mega Flex Plastics's PB Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Packaging & Containers subindustry, Mega Flex Plastics's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mega Flex Plastics PB Ratio vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Mega Flex Plastics's PB Ratio distribution charts can be found below:
* The bar in red indicates where Mega Flex Plastics's PB Ratio falls into.
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Mega Flex Plastics (NSE:MEGAFLEX) has a PB Ratio of 2.04 as of Jul. 14, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Mega Flex Plastics and its competitors. This is 70% above median its historical median of 1.20. Over the past decade, Mega Flex Plastics' PB Ratio has ranged from 0.65 to 3.40. According to the industry distribution chart, Mega Flex Plastics ranks #279 out of 388 companies in the Packaging & Containers industry, placing it in the top 71.9%.
Is Mega Flex Plastics' PB Ratio too high?
Mega Flex Plastics' current PB Ratio of 2.04 is 70% above median its 10-year median of 1.20. Over the past 10 years, this metric has ranged from a low of 0.65 to a high of 3.40. The Packaging & Containers industry median PB Ratio is 1.18. Mega Flex Plastics' value of 2.04 is 72.9% above this industry median. Based on the distribution chart, Mega Flex Plastics ranks #279 out of 388 companies in the Packaging & Containers industry, which is below the industry midpoint. Overall, Mega Flex Plastics has a GF Score™ of 67/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Mega Flex Plastics' PB Ratio compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Mega Flex Plastics ranks #279 out of 388 companies for PB Ratio. This places Mega Flex Plastics in the lower half of its industry. The industry median PB Ratio is 1.18. Mega Flex Plastics' value of 2.04 is 72.9% above this benchmark. Historically, Mega Flex Plastics' own PB Ratio has ranged from 0.65 to 3.40 over the past decade. While the company's 10-year median is 1.20 vs. the industry median of 1.18, Mega Flex Plastics has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for a Packaging & Containers company?
The median PB Ratio among Packaging & Containers companies is 1.18, based on 388 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mega Flex Plastics's current PB Ratio of 2.04 is 72.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Mega Flex Plastics and its competitors. For the Packaging & Containers industry, the median PB Ratio is 1.18 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mega Flex Plastics's current PB Ratio is 2.04, which is 70% above median its own 10-year median of 1.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mega Flex Plastics stock overvalued right now?
Based on GuruFocus' analysis, Mega Flex Plastics (NSE:MEGAFLEX) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹73.11, compared to a current price of ₹105.00 — trading 43.6% above its estimated fair value. The current PB Ratio is 2.04, which is 70% above median its 10-year median of 1.20 and 72.9% above the Packaging & Containers industry median of 1.18. Mega Flex Plastics' overall GF Score™ is 67/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Mega Flex Plastics (NSE:MEGAFLEX), the current PB Ratio is 2.04 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mega Flex Plastics (NSE:MEGAFLEX) Overvalued in 2026?
Based on GuruFocus' analysis, Mega Flex Plastics stock appears to be overvalued.
The current stock price of ₹105.00 is trading 43.6% above its estimated GF Value™ of ₹73.11.
GuruFocus considers Mega Flex Plastics to be Significantly Overvalued.
Key valuation signals for NSE:MEGAFLEX:
PB Ratio: 2.04 (70% above median its 10-year median of 1.20)
GF Value™: ₹73.11 vs. price of ₹105.00 (43.6% above fair value)
Industry Position: 72.9% above the Packaging & Containers median (#279 of 388)
No single metric tells the full story. See the NSE:MEGAFLEX stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mega Flex Plastics Ltd is engaged in manufacturing Leno Bags which are used for packaging agricultural products like potatoes, onions, garlic, coconuts, fruits, and vegetables. The company is also manufacturing Woven Fabric and Sutli (Fibrillated Twisted Thread). The company is also engaged in trading Polypropylene Granules. The company is currently engaged in single-segment business through various distributors and brand names such as Gold Flex, Leno Flex, Tiger, Tiranga, Kisan, and Phantom.
67GF Score
Get the complete analysis for NSE:MEGAFLEX
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MEGAFLEX has been successfully added to your 
