Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
SHSE:603909's PB Ratio is ranked worse than 63.31% of 1720
companies
in the Construction industry
Industry Median: 1.32
vs SHSE:603909: 1.93
During the past 12 months, C and D Holsin Engineering Consulting Co's average Book Value Per Share Growth Rate was 7.80% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 7.40% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 6.40% per year.
During the past 10 years, the average Book Value Per Share Growth Rate was 9.10% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of C and D Holsin Engineering Consulting Co was 28.20% per year. The lowest was -34.90% per year. And the median was 8.85% per year.
Back to Basics: PB Ratio
C and D Holsin Engineering Consulting Co (SHSE:603909) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
C and D Holsin Engineering Consulting Co PB Ratio Related Terms
C and D Holsin Engineering Consulting Co PB Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
C and D Holsin Engineering Consulting Co PB Ratio Chart
C and D Holsin Engineering Consulting Co Annual Data
For the Engineering & Construction subindustry, C and D Holsin Engineering Consulting Co's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
C and D Holsin Engineering Consulting Co PB Ratio vs Construction Industry
C and D Holsin Engineering Consulting Co PB Ratio Calculation
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
C and D Holsin Engineering Consulting Co (SHSE:603909) has a PB Ratio of 1.93 as of Jul. 29, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on C and D Holsin Engineering Consulting Co and its competitors. This is 38% below median its historical median of 3.12. Over the past decade, C and D Holsin Engineering Consulting Co's PB Ratio has ranged from 1.74 to 11.95. According to the industry distribution chart, C and D Holsin Engineering Consulting Co ranks #1089 out of 1720 companies in the Construction industry, placing it in the top 63.3%.
Is C and D Holsin Engineering Consulting Co's PB Ratio too high?
C and D Holsin Engineering Consulting Co's current PB Ratio of 1.93 is 38% below median its 10-year median of 3.12. Over the past 10 years, this metric has ranged from a low of 1.74 to a high of 11.95. The Construction industry median PB Ratio is 1.32. C and D Holsin Engineering Consulting Co's value of 1.93 is 46.2% above this industry median. Based on the distribution chart, C and D Holsin Engineering Consulting Co ranks #1089 out of 1720 companies in the Construction industry, which is below the industry midpoint. Overall, C and D Holsin Engineering Consulting Co has a GF Score™ of 77/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does C and D Holsin Engineering Consulting Co's PB Ratio compare to PWR and FIX?
According to the Construction industry distribution chart, C and D Holsin Engineering Consulting Co ranks #1089 out of 1720 companies for PB Ratio. This places C and D Holsin Engineering Consulting Co in the lower half of its industry. The industry median PB Ratio is 1.32. C and D Holsin Engineering Consulting Co's value of 1.93 is 46.2% above this benchmark. Historically, C and D Holsin Engineering Consulting Co's own PB Ratio has ranged from 1.74 to 11.95 over the past decade. While the company's 10-year median is 3.12 vs. the industry median of 1.32, C and D Holsin Engineering Consulting Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for a Construction company?
The median PB Ratio among Construction companies is 1.32, based on 1,720 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. C and D Holsin Engineering Consulting Co's current PB Ratio of 1.93 is 46.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on C and D Holsin Engineering Consulting Co and its competitors. For the Construction industry, the median PB Ratio is 1.32 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. C and D Holsin Engineering Consulting Co's current PB Ratio is 1.93, which is 38% below median its own 10-year median of 3.12. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is C and D Holsin Engineering Consulting Co stock overvalued right now?
Based on GuruFocus' analysis, C and D Holsin Engineering Consulting Co (SHSE:603909) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥11.91, compared to a current price of ¥8.76 — trading 26.4% below its estimated fair value. The current PB Ratio is 1.93, which is 38% below median its 10-year median of 3.12 and 46.2% above the Construction industry median of 1.32. C and D Holsin Engineering Consulting Co's overall GF Score™ is 77/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For C and D Holsin Engineering Consulting Co (SHSE:603909), the current PB Ratio is 1.93 as of Jul. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is C and D Holsin Engineering Consulting Co (SHSE:603909) Overvalued in 2026?
Based on GuruFocus' analysis, C and D Holsin Engineering Consulting Co stock appears to be undervalued.
The current stock price of ¥8.76 is trading 26.4% below its estimated GF Value™ of ¥11.91.
GuruFocus considers C and D Holsin Engineering Consulting Co to be Modestly Undervalued.
Key valuation signals for SHSE:603909:
PB Ratio: 1.93 (38% below median its 10-year median of 3.12)
GF Value™: ¥11.91 vs. price of ¥8.76 (26.4% below fair value)
Industry Position: 46.2% above the Construction median (#1089 of 1720)
No single metric tells the full story. See the SHSE:603909 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
C and D Holsin Engineering Consulting Co Business Description
C and D Holsin Engineering Consulting Co Ltd is a project management, design, and consulting company. It is engaged in building roads, bridges, and tunnels, and also provides traffic engineering and supporting ancillary works. It specializes in engineering supervision, design consulting, testing, repair and reinforcement, project management, engineering new material research and development, application, and other technical services.
77GF Score
Get the complete analysis for SHSE:603909
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603909 has been successfully added to your 
