Wah Lee IndustrialTPE:3010 -0.81%74 PB Ratio is 1.33 as of Jul. 08, 2026, which is 9% above its 10-year median of 1.22. GuruFocus rates TPE:3010 with a GF Score™ of 74/100 and a GF Value™ of NT$112.77 (Fairly Valued). The stock has 8 warning signs investors should review. Among 2,415 Hardware companies, Wah Lee Industrial ranks better than 71.14% on this metric.
Wah Lee Industrial Corp stock PB Ratio (=1.39) is close to 1-year high of 1.51.
The historical rank and industry rank for Wah Lee Industrial's PB Ratio or its related term are showing as below:
TPE:3010'
s PB Ratio Range Over the Past 10 Years
Min: 0.9 Med: 1.22 Max: 1.81
Current: 1.33
During the past 13 years, Wah Lee Industrial's highest PB Ratio was 1.81. The lowest was 0.90. And the median was 1.22.
TPE:3010's PB Ratio is ranked better than 71.14% of 2415
companies
in the Hardware industry
Industry Median: 2.35
vs TPE:3010: 1.33
During the past 12 months, Wah Lee Industrial's average Book Value Per Share Growth Rate was 5.90% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 9.00% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 10.60% per year.
During the past 10 years, the average Book Value Per Share Growth Rate was 9.20% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of Wah Lee Industrial was 13.50% per year. The lowest was 3.10% per year. And the median was 6.30% per year.
Back to Basics: PB Ratio
Wah Lee Industrial (TPE:3010) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
Wah Lee Industrial PB Ratio Related Terms
Wah Lee Industrial PB Ratio Historical Data
* Premium members only.
The historical data trend for Wah Lee Industrial's PB Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronics & Computer Distribution subindustry, Wah Lee Industrial's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Wah Lee Industrial PB Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Wah Lee Industrial's PB Ratio distribution charts can be found below:
* The bar in red indicates where Wah Lee Industrial's PB Ratio falls into.
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Wah Lee Industrial (TPE:3010) has a PB Ratio of 1.33 as of Jul. 08, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Wah Lee Industrial and its competitors. This is near median its historical median of 1.22. Over the past decade, Wah Lee Industrial's PB Ratio has ranged from 0.90 to 1.81. According to the industry distribution chart, Wah Lee Industrial ranks #697 out of 2415 companies in the Hardware industry, placing it in the top 28.9%.
Is Wah Lee Industrial's PB Ratio too high?
Wah Lee Industrial's current PB Ratio of 1.33 is near median its 10-year median of 1.22. Over the past 10 years, this metric has ranged from a low of 0.90 to a high of 1.81. The Hardware industry median PB Ratio is 2.35. Wah Lee Industrial's value of 1.33 is 43.4% below this industry median. Based on the distribution chart, Wah Lee Industrial ranks #697 out of 2415 companies in the Hardware industry, which is above the industry midpoint. Overall, Wah Lee Industrial has a GF Score™ of 74/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Wah Lee Industrial's PB Ratio compare to SNX and ARW?
According to the Hardware industry distribution chart, Wah Lee Industrial ranks #697 out of 2415 companies for PB Ratio. This puts Wah Lee Industrial in the upper half of its industry. The industry median PB Ratio is 2.35. Wah Lee Industrial's value of 1.33 is 43.4% below this benchmark. Historically, Wah Lee Industrial's own PB Ratio has ranged from 0.90 to 1.81 over the past decade. While the company's 10-year median is 1.22 vs. the industry median of 2.35, Wah Lee Industrial has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for a Hardware company?
The median PB Ratio among Hardware companies is 2.35, based on 2,415 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Wah Lee Industrial's current PB Ratio of 1.33 is 43.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Wah Lee Industrial and its competitors. For the Hardware industry, the median PB Ratio is 2.35 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Wah Lee Industrial's current PB Ratio is 1.33, which is near median its own 10-year median of 1.22. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Wah Lee Industrial stock overvalued right now?
Based on GuruFocus' analysis, Wah Lee Industrial (TPE:3010) is currently considered Fairly Valued. The stock's GF Value™ is NT$112.77, compared to a current price of NT$122.50 — trading 8.6% above its estimated fair value. The current PB Ratio is 1.33, which is near median its 10-year median of 1.22 and 43.4% below the Hardware industry median of 2.35. Wah Lee Industrial's overall GF Score™ is 74/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Wah Lee Industrial (TPE:3010), the current PB Ratio is 1.33 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Wah Lee Industrial (TPE:3010) Overvalued in 2026?
Based on GuruFocus' analysis, Wah Lee Industrial stock appears to be overvalued.
The current stock price of NT$122.50 is trading 8.6% above its estimated GF Value™ of NT$112.77.
GuruFocus considers Wah Lee Industrial to be Fairly Valued.
Key valuation signals for TPE:3010:
PB Ratio: 1.33 (near median its 10-year median of 1.22)
GF Value™: NT$112.77 vs. price of NT$122.50 (8.6% above fair value)
Industry Position: 43.4% below the Hardware median (#697 of 2415)
No single metric tells the full story. See the TPE:3010 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Wah Lee Industrial Corp is engaged in the import/export and agency business of composite materials, engineering plastic, printed circuit board, semiconductor, and computer-related manufacturing materials and equipment. Its segments include Wah Lee Industrial Corporation (Wah Lee) is mainly engaged in the import/export and agency business of composite materials, engineering plastic, printed circuit board, semiconductor, and computer related manufacturing materials and equipment; Raycong H.K., Dong Guan Hua Gang and its subsidiary (Raycong) are mainly engaged in the trade of engineering plastic, composite materials and equipment; Shanghai Yi Kang and its subsidiary (Yi Kang) are mainly engaged in trade of manufacturing materials and import/export business; and Others.
74GF Score
Get the complete analysis for TPE:3010
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:3010 has been successfully added to your 
