Shibaura Machine CoTSHMY 81 PB Ratio is 0.71 as of Jun. 26, 2026, which is 10% below its 10-year median of 0.79. GuruFocus rates TSHMY with a GF Score™ of 81/100 and a GF Value™ of $15.14 (Modestly Undervalued). The stock has 9 warning signs investors should review. Among 2,986 Industrial Products companies, Shibaura Machine Co ranks better than 81.88% on this metric.
Shibaura Machine Co Ltd stock PB Ratio (=0.89) is close to 2-year high of 0.97.
The historical rank and industry rank for Shibaura Machine Co's PB Ratio or its related term are showing as below:
TSHMY'
s PB Ratio Range Over the Past 10 Years
Min: 0.5 Med: 0.79 Max: 1.31
Current: 0.89
During the past 13 years, Shibaura Machine Co's highest PB Ratio was 1.31. The lowest was 0.50. And the median was 0.79.
TSHMY's PB Ratio is ranked better than 81.88% of 2986
companies
in the Industrial Products industry
Industry Median: 2.27
vs TSHMY: 0.89
During the past 12 months, Shibaura Machine Co's average Book Value Per Share Growth Rate was 1.10% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 10.80% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 9.70% per year.
During the past 10 years, the average Book Value Per Share Growth Rate was 4.90% per year.
During the past 13 years, the highest 3-Year average Book Value Per Share Growth Rate of Shibaura Machine Co was 15.10% per year. The lowest was -0.50% per year. And the median was 4.90% per year.
Back to Basics: PB Ratio
Shibaura Machine Co (OTCPK:TSHMY) PB Ratio Explanation
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
Shibaura Machine Co PB Ratio Related Terms
Shibaura Machine Co PB Ratio Historical Data
* Premium members only.
The historical data trend for Shibaura Machine Co's PB Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Shibaura Machine Co's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shibaura Machine Co PB Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shibaura Machine Co's PB Ratio distribution charts can be found below:
* The bar in red indicates where Shibaura Machine Co's PB Ratio falls into.
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Shibaura Machine Co (TSHMY) has a PB Ratio of 0.71 as of Jun. 26, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Shibaura Machine Co and its competitors. This is 10% below median its historical median of 0.79. Over the past decade, Shibaura Machine Co's PB Ratio has ranged from 0.50 to 1.31. According to the industry distribution chart, Shibaura Machine Co ranks #541 out of 2986 companies in the Industrial Products industry, placing it in the top 18.1%.
Is Shibaura Machine Co's PB Ratio too high?
Shibaura Machine Co's current PB Ratio of 0.71 is 10% below median its 10-year median of 0.79. Over the past 10 years, this metric has ranged from a low of 0.50 to a high of 1.31. The Industrial Products industry median PB Ratio is 2.27. Shibaura Machine Co's value of 0.71 is 68.7% below this industry median. Based on the distribution chart, Shibaura Machine Co ranks #541 out of 2986 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Shibaura Machine Co has a GF Score™ of 81/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Shibaura Machine Co's PB Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Shibaura Machine Co ranks #541 out of 2986 companies for PB Ratio. This places Shibaura Machine Co in the top 18% of its industry — outperforming the majority of peers. The industry median PB Ratio is 2.27. Shibaura Machine Co's value of 0.71 is 68.7% below this benchmark. Historically, Shibaura Machine Co's own PB Ratio has ranged from 0.50 to 1.31 over the past decade. While the company's 10-year median is 0.79 vs. the industry median of 2.27, Shibaura Machine Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for an Industrial Products company?
The median PB Ratio among Industrial Products companies is 2.27, based on 2,986 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shibaura Machine Co's current PB Ratio of 0.71 is 68.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Shibaura Machine Co and its competitors. For the Industrial Products industry, the median PB Ratio is 2.27 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shibaura Machine Co's current PB Ratio is 0.71, which is 10% below median its own 10-year median of 0.79. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shibaura Machine Co stock overvalued right now?
Based on GuruFocus' analysis, Shibaura Machine Co (TSHMY) is currently considered Modestly Undervalued. The stock's GF Value™ is $15.14, compared to a current price of $11.17 — trading 26.2% below its estimated fair value. The current PB Ratio is 0.71, which is 10% below median its 10-year median of 0.79 and 68.7% below the Industrial Products industry median of 2.27. Shibaura Machine Co's overall GF Score™ is 81/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Shibaura Machine Co (TSHMY), the current PB Ratio is 0.71 as of Jun. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shibaura Machine Co (TSHMY) Overvalued in 2026?
Based on GuruFocus' analysis, Shibaura Machine Co stock appears to be undervalued.
The current stock price of $11.17 is trading 26.2% below its estimated GF Value™ of $15.14.
GuruFocus considers Shibaura Machine Co to be Modestly Undervalued.
Key valuation signals for TSHMY:
PB Ratio: 0.71 (10% below median its 10-year median of 0.79)
GF Value™: $15.14 vs. price of $11.17 (26.2% below fair value)
Industry Position: 68.7% below the Industrial Products median (#541 of 2986)
No single metric tells the full story. See the TSHMY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shibaura Machine Co Ltd is engaged in manufacturing and distribution of molding machineries and machine tools. The business of the company is divided into two segments: molding machinery and machine tools. The company's product portfolio comprises injection molding machines, die-casting machines, plastic extrusion, large-size machine tools, portal-type machine tools, machining centers, horizontal boring machines, and high-precision machines, among others. The company's products are used in manufacturing of computers, automobile engines, transmissions, medical products, high-precision lenses, displays, construction machines, and wind power generation. A vast majority of the company's revenue is generated by the molding machinery segment, and the company earns most of its revenue in Japan.
81GF Score
Get the complete analysis for TSHMY
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSHMY has been successfully added to your 
