Iwaki CoTSE:6237 +1.80%88 PEG Ratio is 0.90 as of Jul. 09, 2026, which is 1% below its 10-year median of 0.91. GuruFocus rates TSE:6237 with a GF Score™ of 88/100 and a GF Value™ of 円2,700.96 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 1,280 Industrial Products companies, Iwaki Co ranks better than 73.91% on this metric.
PE Ratio without NRI / 5-Year EBITDA Growth Rate*
PEG Ratio is defined as the PE Ratio without NRI divided by the growth ratio. The growth rate we use is the 5-Year EBITDA growth rate. As of today, Iwaki Co's PE Ratio without NRI is 19.48. Iwaki Co's 5-Year EBITDA growth rate is 21.70%. Therefore, Iwaki Co's PEG Ratio for today is 0.90.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Iwaki Co's PEG Ratio or its related term are showing as below:
TSE:6237'
s PEG Ratio Range Over the Past 10 Years
Min: 0.37 Med: 0.91 Max: 2.41
Current: 0.9
During the past 11 years, Iwaki Co's highest PEG Ratio was 2.41. The lowest was 0.37. And the median was 0.91.
TSE:6237's PEG Ratio is ranked better than 73.91% of 1280
companies
in the Industrial Products industry
Industry Median: 1.805
vs TSE:6237: 0.90
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Iwaki Co (TSE:6237) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Iwaki Co PEG Ratio Related Terms
Iwaki Co PEG Ratio Historical Data
* Premium members only.
The historical data trend for Iwaki Co's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Iwaki Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Iwaki Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Iwaki Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Iwaki Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Iwaki Co (TSE:6237) has a PEG Ratio of 0.90 as of Jul. 09, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Iwaki Co and its competitors. This is near median its historical median of 0.91. Over the past decade, Iwaki Co's PEG Ratio has ranged from 0.37 to 2.41. According to the industry distribution chart, Iwaki Co ranks #334 out of 1280 companies in the Industrial Products industry, placing it in the top 26.1%.
Is Iwaki Co's PEG Ratio too high?
Iwaki Co's current PEG Ratio of 0.90 is near median its 10-year median of 0.91. Over the past 10 years, this metric has ranged from a low of 0.37 to a high of 2.41. The Industrial Products industry median PEG Ratio is 1.81. Iwaki Co's value of 0.90 is 50.1% below this industry median. Based on the distribution chart, Iwaki Co ranks #334 out of 1280 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Iwaki Co has a GF Score™ of 88/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Iwaki Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Iwaki Co ranks #334 out of 1280 companies for PEG Ratio. This puts Iwaki Co in the upper half of its industry. The industry median PEG Ratio is 1.81. Iwaki Co's value of 0.90 is 50.1% below this benchmark. Historically, Iwaki Co's own PEG Ratio has ranged from 0.37 to 2.41 over the past decade. While the company's 10-year median is 0.91 vs. the industry median of 1.81, Iwaki Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.81, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Iwaki Co's current PEG Ratio of 0.90 is 50.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Iwaki Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Iwaki Co's current PEG Ratio is 0.90, which is near median its own 10-year median of 0.91. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Iwaki Co stock overvalued right now?
Based on GuruFocus' analysis, Iwaki Co (TSE:6237) is currently considered Significantly Overvalued. The stock's GF Value™ is 円2,700.96, compared to a current price of 円4,250.00 — trading 57.4% above its estimated fair value. The current PEG Ratio is 0.90, which is near median its 10-year median of 0.91 and 50.1% below the Industrial Products industry median of 1.81. Iwaki Co's overall GF Score™ is 88/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Iwaki Co (TSE:6237), the current PEG Ratio is 0.90 as of Jul. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Iwaki Co (TSE:6237) Overvalued in 2026?
Based on GuruFocus' analysis, Iwaki Co stock appears to be overvalued.
The current stock price of 円4,250.00 is trading 57.4% above its estimated GF Value™ of 円2,700.96.
GuruFocus considers Iwaki Co to be Significantly Overvalued.
Key valuation signals for TSE:6237:
PEG Ratio: 0.90 (near median its 10-year median of 0.91)
GF Value™: 円2,700.96 vs. price of 円4,250.00 (57.4% above fair value)
Industry Position: 50.1% below the Industrial Products median (#334 of 1280)
No single metric tells the full story. See the TSE:6237 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Iwaki Co Ltd engages in the development, production, and sale of various types of fluid control products and pumps, including the chemical pump. The company offers magnetic drive pumps and related accessories; metering pumps, including motor-driven and electromagnetic metering pumps; and pneumatic drive pumps, such as pneumatic drive bellows, drive dispensers, and chemical replenishing pumps, as well as related accessories. It also provides rotary displacement pumps comprising hi-cera, magnetic drive gear, chemical gear, and screw pumps; air pumps consisting of gas-liquid transfer pumps, and diaphragm and bellows type air pumps; and turbine pumps that include non-metal magnetic and magnetic drive turbine pumps. In addition, the company offers water quality control devices.
88GF Score
Get the complete analysis for TSE:6237
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6237 has been successfully added to your 
