The PE Ratio (TTM), or Price-to-Earnings ratio, or P/E Ratio, is a financial ratio used to compare a company's market price to its Earnings per Share (Diluted). As of today (2024-04-26), Axiall's share price is
€29.56.
Axiall's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Jun. 2016 was €-11.48. Therefore, Axiall's PE Ratio (TTM) for today is At Loss.
The historical rank and industry rank for Axiall's PE Ratio (TTM) or its related term are showing as below:
FRA:HGQN'
s PE Ratio (TTM) Range Over the Past 10 Years
Min: At Loss Med: At Loss Max: At Loss
Current: At Loss
FRA:HGQN's PE Ratio (TTM) is not ranked
in the Chemicals industry.
Industry Median: 22.87
vs FRA:HGQN: At Loss
As of today (2024-04-26), Axiall's share price is €29.56.
Axiall's EPS without NRI for the trailing twelve months (TTM) ended in Jun. 2016 was €-11.32. Therefore, Axiall's PE Ratio without NRI for today is At Loss.
Axiall's EPS without NRI for the
three
months ended in Jun. 2016 was €-0.35.
Its EPS without NRI for the trailing twelve months (TTM) ended in Jun. 2016 was €-11.32.
Axiall's EPS (Basic) for the
three
months ended in Jun. 2016 was €-0.35.
Its EPS (Basic) for the trailing twelve months (TTM) ended in Jun. 2016 was €-11.48.
Axiall PE Ratio (TTM) Historical Data
The historical data trend for Axiall's PE Ratio (TTM) can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Chemicals subindustry, Axiall's PE Ratio (TTM), along with its competitors' market caps and PE Ratio (TTM) data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Axiall's PE Ratio (TTM) Distribution in the Chemicals Industry
For the Chemicals industry and Basic Materials sector, Axiall's PE Ratio (TTM) distribution charts can be found below:
* The bar in red indicates where Axiall's PE Ratio (TTM) falls into.
Axiall PE Ratio (TTM) Calculation
The PE Ratio (TTM), or Price-to-Earnings ratio, or P/E Ratio, is a financial ratio used to compare a company's market price to its Earnings per Share (Diluted). It is the most widely used ratio in the valuation of stocks.
Axiall's PE Ratio (TTM) for today is calculated as
Axiall's Share Price of today is €29.56.
Axiall's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Jun. 2016 adds up the quarterly data reported by the company within the most recent 12 months, which was €-11.48.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
There are at least three kinds of PE Ratio (TTM)s used by different investors. They are Trailing Twelve Month PE Ratio (TTM) or PE Ratio (TTM) (TTM), Forward PE Ratio, or PE Ratio without NRI. A new PE Ratio (TTM) based on inflation-adjusted normalized PE Ratio (TTM) is called Shiller PE Ratio, after Yale professor Robert Shiller.
In the calculation of PE Ratio (TTM), the earnings per share used are the earnings per share over the past 12 months. For Forward PE Ratio, the earnings are the expected earnings for the next twelve months. In the case of PE Ratio without NRI, the reported earnings less the non-recurring items are used.
For Shiller PE Ratio, the earnings of the past 10 years are inflation-adjusted and averaged. Since it looks at the average over the last 10 years, Shiller PE Ratio is also called PE10.
Axiall (FRA:HGQN) PE Ratio (TTM) Explanation
The PE Ratio (TTM) can be viewed as the number of years it takes for the company to earn back the price you pay for the stock. For example, if a company earns $2 a share per year, and the stock is traded at $30, the PE Ratio (TTM) is 15. Therefore it takes 15 years for the company to earn back the $30 you paid for its stock, assuming the earnings stays constant over the next 15 years.
In real business, earnings never stay constant. If a company can grow its earnings, it takes fewer years for the company to earn back the price you pay for the stock. If a company's earnings decline it takes more years. As a shareholder, you want the company to earn back the price you pay as soon as possible. Therefore, lower P/E stocks are more attractive than higher P/E stocks so long as the PE Ratio (TTM) is positive. Also for stocks with the same PE Ratio (TTM), the one with faster growth business is more attractive.
If a company loses money, the PE Ratio (TTM) becomes meaningless.
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the PE Ratio (TTM) divided by the growth ratio. He thinks a company with a PE Ratio (TTM) equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a PE Ratio (TTM) of 20, instead of a company growing 10% a year with a PE Ratio (TTM) of 10.
Because the PE Ratio (TTM) measures how long it takes to earn back the price you pay, the PE Ratio (TTM) can be applied to the stocks across different industries. That is why it is the one of the most important and widely used indicators for the valuation of stocks.
Investors need to be aware that the PE Ratio (TTM) can be misleading a lot of times, especially when the underlying business is cyclical and unpredictable. As Peter Lynch pointed out, cyclical businesses have higher profit margins at the peaks of the business cycles. Their earnings are high and PE Ratio (TTM)s are artificially low. It is usually a bad idea to buy a cyclical business when the PE Ratio (TTM) is low. A better ratio to identify the time to buy a cyclical businesses is the PS Ratio .
PE Ratio (TTM) can also be affected by non-recurring-items such as the sale of part of businesses. This may increase for the current year or quarter dramatically. But it cannot be repeated over and over. Therefore PE Ratio without NRI is a more accurate indication of valuation than PE Ratio (TTM).
Axiall PE Ratio (TTM) Related Terms
Thank you for viewing the detailed overview of Axiall's PE Ratio (TTM) provided by GuruFocus.com. Please click on the following links to see related term pages.
Axiall Corp is a Delaware corporation incorporated in 1984. It is a manufacturer and marketer of chemicals and building products. It operates through three reportable segments: chlorovinyls; building products; and aromatics. Its Chlor-alkali and derivative products include Chlorine, Caustic soda, Vinyl chloride monomer, Vinyl resins, Other chlor-alkali and derivative products such as Chlorinated ethylene, Calcium hypochlorite, Hydrochloric acid, Phosgene derivatives, and also Compound products such as Vinyl compounds and Compound additives and plasticizers. Its Building products include Window and door profiles and mouldings products such as Window and door profiles, Trim, mouldings and deck, Outdoor building products such as Siding and exterior accessories, Pipe and pipe fittings. Its Aromatics products include Cumene such as Phenol and acetone. In its chlorovinyls segment, it produces chlorine and its co-product caustic soda by subjecting salt brine (sodium chloride) to an electric current creating a chemical reaction that results in chlorine gas, hydrogen gas and caustic soda (sodium hydroxide). It produces VCM by reacting purchased ethylene with chlorine. It produces vinyl resins by polymerization of VCM in a batch reactor process. It formulates its vinyl compounds to specific customer needs by blending its vinyl resins with various additives such as plasticizers, impact modifiers, stabilizers and pigments, most of which are purchased. It also has the capacity to produce EDC, an intermediate in the manufacture of VCM, for external sales. The significant raw materials it purchases from third parties include salt brine, ethylene, compound additives and natural gas. Its chlorovinyls segment faces competition from numerous manufacturers, including The Dow Chemical Company, Formosa Plastics Corporation, USA, Occidental Chemical Corporation, Olin Corporation, Shintech, Inc. and Westlake Chemical Corporation. In its Building Products Segment, the Company produces the majority of its building products through the extrusion of vinyl products. It also produces some pipe fittings through injection molding. These products are produced by heating vinyl compounds until they melt and then injecting them under pressure into a hollow mold to create three dimensional parts. The principal raw material it uses in the production of its building products is vinyl resin, which is blended with other compound additives to form vinyl compounds, which are then extruded or injection molded. The building products segment faces competition for each of its products from numerous manufacturers of vinyl products and traditional building materials. This segment's chief competitors include Ply Gem Holdings, Inc., VEKA Inc., CertainTeed Corporation, Vision Group, IPEX Inc., Associated Materials, Quanex, Deceuninck North America, CPG Azek and Bow Plastics. In its aromatics segment, it produces cumene through an alkylation reaction of benzene and refinery grade p
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
Portfolio Contest
FRA:HGQN has been successfully added to your 