Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Richard Sloan from the University of Michigan was first to document what is referred to as the "accrual anomaly". His 1996 paper found that shares of companies with small or negative accruals vastly outperform (+10%) those of companies with large ones.
As of Jun. 2026, Core Molding Technologies has a Sloan Ratio of 6.88%, indicating the company is in the safe zone and there is no funny business with accruals.
Core Molding Technologies (AMEX:CMT) Sloan Ratio % Explanation
A former University of Michigan researcher, Richard Sloan's 1996 paper found that shares of companies with small or negative accruals vastly outperform (+10%) those of companies with large ones. In fact, for the 40-year period between 1962 and 2001, buying the lowest accrual companies and shorting the highest accrual companies resulted in an average annual compounded return of 18%, more than double the S&P 500's 7.4% annual return over the same period.
If the Sloan Ratio is between -10% and 10%, the company is in the safe zone and there is no funny business with accruals.
If the Sloan Ratio is less than between -25% and -10% on the negative side, and between 10% and 25% on the positive side, this is a warning stage of accrual build up.
If the Sloan Ratio is less than -25% or greater than 25%, and this ratio is consistent over several quarters or even years, be careful. Earnings are highly likely to be made up of accruals.
As of Jun. 2026, Core Molding Technologies has a Sloan Ratio of 6.88%, indicating the company is in the safe zone and there is no funny business with accruals.
Core Molding Technologies Sloan Ratio % Related Terms
Core Molding Technologies Sloan Ratio % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Chemicals subindustry, Core Molding Technologies's Sloan Ratio %, along with its competitors' market caps and Sloan Ratio % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Core Molding Technologies Sloan Ratio % vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Core Molding Technologies's Sloan Ratio % distribution charts can be found below:
* The bar in red indicates where Core Molding Technologies's Sloan Ratio % falls into.
Core Molding Technologies Sloan Ratio % Calculation
Earnings contain a lot of non cash earnings which is called accruals. The Sloan ratio is a way to identify firms with low non-cash or accrual-derived earnings relative to their cash flow.
Core Molding Technologies's Sloan Ratio for the fiscal year that ended in Dec. 2025 is calculated as
Core Molding Technologies's Net Income for the trailing twelve months (TTM) ended in Jun. 2026 was 1.877 (Sep. 2025 ) + 3.083 (Dec. 2025 ) + 0.605 (Mar. 2026 ) + 1.783 (Jun. 2026 ) = $7.3 Mil.
Core Molding Technologies's Cash Flow from Operations for the trailing twelve months (TTM) ended in Jun. 2026 was 4.572 (Sep. 2025 ) + 5.019 (Dec. 2025 ) + -9.229 (Mar. 2026 ) + 16.299 (Jun. 2026 ) = $16.7 Mil.
Core Molding Technologies's Cash Flow from Investing for the trailing twelve months (TTM) ended in Jun. 2026 was -4.918 (Sep. 2025 ) + -7.963 (Dec. 2025 ) + -3.784 (Mar. 2026 ) + -8.298 (Jun. 2026 ) = $-25.0 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Core Molding Technologies (CMT) has a Sloan Ratio % of 6.88% as of Jun. 2026. Sloan ratio measures earnings quality based on the amount of accruals. View historical data on Core Molding Technologies and its competitors.
Is Core Molding Technologies' Sloan Ratio % too high?
Core Molding Technologies' current Sloan Ratio % is 6.88%. Overall, Core Molding Technologies has a GF Score™ of 49/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Core Molding Technologies' Sloan Ratio % compare to FF and HDSN?
Core Molding Technologies' Sloan Ratio % of 6.88% can be compared against companies in the Chemicals industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Sloan Ratio % for a Chemicals company?
A good Sloan Ratio % depends on the Chemicals industry context. However, Sloan Ratio % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Sloan Ratio % mean?
A high Sloan Ratio % can signal that a stock is expensive relative to its fundamentals. Sloan ratio measures earnings quality based on the amount of accruals. View historical data on Core Molding Technologies and its competitors. Core Molding Technologies's current Sloan Ratio % is 6.88%. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Core Molding Technologies stock overvalued right now?
Based on GuruFocus' analysis, Core Molding Technologies (CMT) is currently considered Significantly Overvalued. The stock's GF Value™ is $14.89, compared to a current price of $26.27 — trading 76.4% above its estimated fair value. The current Sloan Ratio % is 6.88%. Core Molding Technologies' overall GF Score™ is 49/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Sloan Ratio % calculated?
Sloan Ratio % is calculated from a company's financial statements. For Core Molding Technologies (CMT), the current Sloan Ratio % is 6.88% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Core Molding Technologies (CMT) Overvalued in 2026?
Based on GuruFocus' analysis, Core Molding Technologies stock appears to be overvalued.
The current stock price of $26.27 is trading 76.4% above its estimated GF Value™ of $14.89.
GuruFocus considers Core Molding Technologies to be Significantly Overvalued.
Key valuation signals for CMT:
Sloan Ratio %: 6.88%
GF Value™: $14.89 vs. price of $26.27 (76.4% above fair value)
No single metric tells the full story. See the CMT stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Core Molding Technologies Inc operates in the engineered materials market as one operating segment as a molder of thermoplastic and thermoset structural products. It produces and sells molded products for varied markets, including medium and heavy-duty trucks, automobiles, power sports, construction and agriculture, building products, and other industrial markets. The processes include compression molding of sheet molding compound (SMC), resin transfer molding (RTM), liquid molding of dicyclopentadiene (DCPD), spray-up and hand-lay-up, direct long-fiber thermoplastics (D-LFT) and structural foam and structural web injection molding (SIM). It operates operates in Columbus, Ohio; Gaffney, South Carolina; Winona, Minnesota; Matamoros and Escobedo, Mexico; and Cobourg, Ontario, Canada.
49GF Score
Get the complete analysis for CMT
Sloan Ratio % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
CMT has been successfully added to your 
