Permsin Steel Works PCLBKK:PERM 26 Current Ratio is 0.46 as of Mar. 2026, which is 51% below its 10-year median of 0.93. GuruFocus rates BKK:PERM with a GF Score™ of 26/100 and a GF Value™ of ฿0.64 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 635 Steel companies, Permsin Steel Works PCL ranks worse than 94.02% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Permsin Steel Works PCL's current ratio for the quarter that ended in Mar. 2026 was 0.46.
Permsin Steel Works PCL has a current ratio of 0.46. It indicates that the company may have difficulty meeting its current obligations. Low values, however, do not indicate a critical problem. If Permsin Steel Works PCL has good long-term prospects, it may be able to borrow against those prospects to meet current obligations.
The historical rank and industry rank for Permsin Steel Works PCL's Current Ratio or its related term are showing as below:
BKK:PERM'
s Current Ratio Range Over the Past 10 Years
Min: 0.43 Med: 0.93 Max: 1.04
Current: 0.46
During the past 13 years, Permsin Steel Works PCL's highest Current Ratio was 1.04. The lowest was 0.43. And the median was 0.93.
BKK:PERM's Current Ratio is ranked worse than 94.02% of 635
companies
in the Steel industry
Industry Median: 1.63
vs BKK:PERM: 0.46
Permsin Steel Works PCL (BKK:PERM) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Permsin Steel Works PCL Current Ratio Related Terms
Permsin Steel Works PCL Current Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:PERM vs NUE, STLD, RS: Current Ratio Comparison
For the Steel subindustry, Permsin Steel Works PCL's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Permsin Steel Works PCL Current Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Permsin Steel Works PCL's Current Ratio distribution charts can be found below:
* The bar in red indicates where Permsin Steel Works PCL's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Permsin Steel Works PCL (BKK:PERM) has a Current Ratio of 0.46 as of Mar. 2026. This is 51% below median its historical median of 0.93. Over the past decade, Permsin Steel Works PCL's Current Ratio has ranged from 0.43 to 1.04. According to the industry distribution chart, Permsin Steel Works PCL ranks #597 out of 635 companies in the Steel industry, placing it in the top 94%.
Is Permsin Steel Works PCL's Current Ratio too high?
Permsin Steel Works PCL's current Current Ratio of 0.46 is 51% below median its 10-year median of 0.93. Over the past 10 years, this metric has ranged from a low of 0.43 to a high of 1.04. The Steel industry median Current Ratio is 1.63. Permsin Steel Works PCL's value of 0.46 is 71.8% below this industry median. Based on the distribution chart, Permsin Steel Works PCL ranks #597 out of 635 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Permsin Steel Works PCL has a GF Score™ of 26/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Permsin Steel Works PCL's Current Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Permsin Steel Works PCL ranks #597 out of 635 companies for Current Ratio. This places Permsin Steel Works PCL in the lower half of its industry. The industry median Current Ratio is 1.63. Permsin Steel Works PCL's value of 0.46 is 71.8% below this benchmark. Historically, Permsin Steel Works PCL's own Current Ratio has ranged from 0.43 to 1.04 over the past decade. While the company's 10-year median is 0.93 vs. the industry median of 1.63, Permsin Steel Works PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for a Steel company?
The median Current Ratio among Steel companies is 1.63, based on 635 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Permsin Steel Works PCL's current Current Ratio of 0.46 is 71.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Steel industry, the median Current Ratio is 1.63 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Permsin Steel Works PCL's current Current Ratio is 0.46, which is 51% below median its own 10-year median of 0.93. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Permsin Steel Works PCL stock overvalued right now?
Based on GuruFocus' analysis, Permsin Steel Works PCL (BKK:PERM) is currently considered Possible Value Trap. The stock's GF Value™ is ฿0.64, compared to a current price of ฿0.25 — trading 60.9% below its estimated fair value. The current Current Ratio is 0.46, which is 51% below median its 10-year median of 0.93 and 71.8% below the Steel industry median of 1.63. Permsin Steel Works PCL's overall GF Score™ is 26/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Permsin Steel Works PCL (BKK:PERM), the current Current Ratio is 0.46 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Permsin Steel Works PCL (BKK:PERM) Overvalued in 2026?
Based on GuruFocus' analysis, Permsin Steel Works PCL stock appears to be undervalued.
The current stock price of ฿0.25 is trading 60.9% below its estimated GF Value™ of ฿0.64.
GuruFocus considers Permsin Steel Works PCL to be Possible Value Trap.
Key valuation signals for BKK:PERM:
Current Ratio: 0.46 (51% below median its 10-year median of 0.93)
GF Value™: ฿0.64 vs. price of ฿0.25 (60.9% below fair value)
Industry Position: 71.8% below the Steel median (#597 of 635)
No single metric tells the full story. See the BKK:PERM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Permsin Steel Works PCL is principally engaged in the manufacture and distribution of hot rolled steel and cold rolled steel, C-channel, galvanized high tensile strength, electro-galvanized steel, C-line, C-U, t-bar, and roll forming metal sheet. The Group has three reportable segments: the Distribution of rolled steel segment, the Manufacturing and distribution of metal sheet segment, and the Manufacturing and distribution of pre-painted steel coil segment. The majority of revenue is from the Manufacturing and distribution of metal sheet segment.
26GF Score
Get the complete analysis for BKK:PERM
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:PERM has been successfully added to your 
