Electro Aco AltonaBSP:EALT3 79 Current Ratio is 1.50 as of Mar. 2026, which is 32% above its 10-year median of 1.14. GuruFocus rates BSP:EALT3 with a GF Score™ of 79/100 and a GF Value™ of R$12.86 (Fairly Valued). The stock has 8 warning signs investors should review. Among 3,073 Industrial Products companies, Electro Aco Altona ranks worse than 69.35% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Electro Aco Altona's current ratio for the quarter that ended in Mar. 2026 was 1.50.
Electro Aco Altona has a current ratio of 1.50. It generally indicates good short-term financial strength.
The historical rank and industry rank for Electro Aco Altona's Current Ratio or its related term are showing as below:
BSP:EALT3'
s Current Ratio Range Over the Past 10 Years
Min: 0.92 Med: 1.14 Max: 1.87
Current: 1.5
During the past 13 years, Electro Aco Altona's highest Current Ratio was 1.87. The lowest was 0.92. And the median was 1.14.
BSP:EALT3's Current Ratio is ranked worse than 69.35% of 3073
companies
in the Industrial Products industry
Industry Median: 1.96
vs BSP:EALT3: 1.50
Electro Aco Altona (BSP:EALT3) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Electro Aco Altona Current Ratio Related Terms
Electro Aco Altona Current Ratio Historical Data
* Premium members only.
The historical data trend for Electro Aco Altona's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BSP:EALT3 vs CRS, ATI, MLI: Current Ratio Comparison
For the Metal Fabrication subindustry, Electro Aco Altona's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Electro Aco Altona Current Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Electro Aco Altona's Current Ratio distribution charts can be found below:
* The bar in red indicates where Electro Aco Altona's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Electro Aco Altona (BSP:EALT3) has a Current Ratio of 1.50 as of Mar. 2026. This is 32% above median its historical median of 1.14. Over the past decade, Electro Aco Altona's Current Ratio has ranged from 0.92 to 1.87. According to the industry distribution chart, Electro Aco Altona ranks #2131 out of 3073 companies in the Industrial Products industry, placing it in the top 69.3%.
Is Electro Aco Altona's Current Ratio too high?
Electro Aco Altona's current Current Ratio of 1.50 is 32% above median its 10-year median of 1.14. Over the past 10 years, this metric has ranged from a low of 0.92 to a high of 1.87. The Industrial Products industry median Current Ratio is 1.96. Electro Aco Altona's value of 1.50 is 23.5% below this industry median. Based on the distribution chart, Electro Aco Altona ranks #2131 out of 3073 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Electro Aco Altona has a GF Score™ of 79/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Electro Aco Altona's Current Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Electro Aco Altona ranks #2131 out of 3073 companies for Current Ratio. This places Electro Aco Altona in the lower half of its industry. The industry median Current Ratio is 1.96. Electro Aco Altona's value of 1.50 is 23.5% below this benchmark. Historically, Electro Aco Altona's own Current Ratio has ranged from 0.92 to 1.87 over the past decade. While the company's 10-year median is 1.14 vs. the industry median of 1.96, Electro Aco Altona has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.96, based on 3,073 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Electro Aco Altona's current Current Ratio of 1.50 is 23.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Electro Aco Altona's current Current Ratio is 1.50, which is 32% above median its own 10-year median of 1.14. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Electro Aco Altona stock overvalued right now?
Based on GuruFocus' analysis, Electro Aco Altona (BSP:EALT3) is currently considered Fairly Valued. The stock's GF Value™ is R$12.86, compared to a current price of R$12.95 — trading 0.7% above its estimated fair value. The current Current Ratio is 1.50, which is 32% above median its 10-year median of 1.14 and 23.5% below the Industrial Products industry median of 1.96. Electro Aco Altona's overall GF Score™ is 79/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Electro Aco Altona (BSP:EALT3), the current Current Ratio is 1.50 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Electro Aco Altona (BSP:EALT3) Overvalued in 2026?
Based on GuruFocus' analysis, Electro Aco Altona stock appears to be overvalued.
The current stock price of R$12.95 is trading 0.7% above its estimated GF Value™ of R$12.86.
GuruFocus considers Electro Aco Altona to be Fairly Valued.
Key valuation signals for BSP:EALT3:
Current Ratio: 1.50 (32% above median its 10-year median of 1.14)
GF Value™: R$12.86 vs. price of R$12.95 (0.7% above fair value)
Industry Position: 23.5% below the Industrial Products median (#2131 of 3073)
No single metric tells the full story. See the BSP:EALT3 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Electro Aco Altona SA manufactures steel based machinery & equipment. Its product portfolio comprises of carbon steel, high & low alloy steel, manganese steel & heat resistant steel castings. It caters to industries like earthmoving & mining.The company divides its business into two sectors: Repetitive and Custom. The Repetitive sector is responsible for series production of items for self-propelled equipment assemblers, including customers active in the segment of construction and mining machinery. The Custom sector produces customized parts and assemblies.
79GF Score
Get the complete analysis for BSP:EALT3
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BSP:EALT3 has been successfully added to your 
