Daido Steel CoDAIDF +26.83%57 Current Ratio is 2.36 as of Dec. 2025, which is 32% above its 10-year median of 1.79. GuruFocus rates DAIDF with a GF Score™ of 57/100 and a GF Value™ of $7.17 (Significantly Overvalued). The stock has 7 warning signs investors should review. Among 638 Steel companies, Daido Steel Co ranks better than 63.79% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Daido Steel Co's current ratio for the quarter that ended in Dec. 2025 was 2.36.
Daido Steel Co has a current ratio of 2.36. It generally indicates good short-term financial strength.
The historical rank and industry rank for Daido Steel Co's Current Ratio or its related term are showing as below:
DAIDF'
s Current Ratio Range Over the Past 10 Years
Min: 1.4 Med: 1.79 Max: 2.43
Current: 2.24
During the past 13 years, Daido Steel Co's highest Current Ratio was 2.43. The lowest was 1.40. And the median was 1.79.
DAIDF's Current Ratio is ranked better than 63.79% of 638
companies
in the Steel industry
Industry Median: 1.63
vs DAIDF: 2.24
Daido Steel Co (OTCPK:DAIDF) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Daido Steel Co Current Ratio Related Terms
Daido Steel Co Current Ratio Historical Data
* Premium members only.
The historical data trend for Daido Steel Co's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Daido Steel Co's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Daido Steel Co Current Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Daido Steel Co's Current Ratio distribution charts can be found below:
* The bar in red indicates where Daido Steel Co's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Daido Steel Co (DAIDF) has a Current Ratio of 2.36 as of Dec. 2025. This is 32% above median its historical median of 1.79. Over the past decade, Daido Steel Co's Current Ratio has ranged from 1.40 to 2.43. According to the industry distribution chart, Daido Steel Co ranks #231 out of 638 companies in the Steel industry, placing it in the top 36.2%.
Is Daido Steel Co's Current Ratio too high?
Daido Steel Co's current Current Ratio of 2.36 is 32% above median its 10-year median of 1.79. Over the past 10 years, this metric has ranged from a low of 1.40 to a high of 2.43. The Steel industry median Current Ratio is 1.63. Daido Steel Co's value of 2.36 is 44.8% above this industry median. Based on the distribution chart, Daido Steel Co ranks #231 out of 638 companies in the Steel industry, which is above the industry midpoint. Overall, Daido Steel Co has a GF Score™ of 57/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Daido Steel Co's Current Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Daido Steel Co ranks #231 out of 638 companies for Current Ratio. This puts Daido Steel Co in the upper half of its industry. The industry median Current Ratio is 1.63. Daido Steel Co's value of 2.36 is 44.8% above this benchmark. Historically, Daido Steel Co's own Current Ratio has ranged from 1.40 to 2.43 over the past decade. While the company's 10-year median is 1.79 vs. the industry median of 1.63, Daido Steel Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for a Steel company?
The median Current Ratio among Steel companies is 1.63, based on 638 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Daido Steel Co's current Current Ratio of 2.36 is 44.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Steel industry, the median Current Ratio is 1.63 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Daido Steel Co's current Current Ratio is 2.36, which is 32% above median its own 10-year median of 1.79. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Daido Steel Co stock overvalued right now?
Based on GuruFocus' analysis, Daido Steel Co (DAIDF) is currently considered Significantly Overvalued. The stock's GF Value™ is $7.17, compared to a current price of $11.70 — trading 63.2% above its estimated fair value. The current Current Ratio is 2.36, which is 32% above median its 10-year median of 1.79 and 44.8% above the Steel industry median of 1.63. Daido Steel Co's overall GF Score™ is 57/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Daido Steel Co (DAIDF), the current Current Ratio is 2.36 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Daido Steel Co (DAIDF) Overvalued in 2026?
Based on GuruFocus' analysis, Daido Steel Co stock appears to be overvalued.
The current stock price of $11.70 is trading 63.2% above its estimated GF Value™ of $7.17.
GuruFocus considers Daido Steel Co to be Significantly Overvalued.
Key valuation signals for DAIDF:
Current Ratio: 2.36 (32% above median its 10-year median of 1.79)
GF Value™: $7.17 vs. price of $11.70 (63.2% above fair value)
Industry Position: 44.8% above the Steel median (#231 of 638)
No single metric tells the full story. See the DAIDF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Daido Steel Co Ltd is a Japan-based company that primarily operates through three segments. The special steel segment produces and distributes specialty steel for automotive parts, industrial machinery parts, electrical machinery parts, construction, and tool steel. The high-performance materials and magnetic materials segment produces and sells stainless steel, nickel-based alloys, electrical and electronic parts, magnetic material products, alloy powder, titanium products, and welding wire. The parts for automobile and industrial equipment segment is engaged in forging and casting for parts for automobiles, industrial machines, chemical equipment, and oil drilling rigs. The company generates majority of its revenue from the Japanese domestic market.
57GF Score
Get the complete analysis for DAIDF
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
DAIDF has been successfully added to your 
