Billington HoldingsLSE:BILN 76 Current Ratio is 2.49 as of Dec. 2025, which is 48% above its 10-year median of 1.68. GuruFocus rates LSE:BILN with a GF Score™ of 76/100 and a GF Value™ of £4.10 (Fairly Valued). The stock has 9 warning signs investors should review. Among 1,781 Construction companies, Billington Holdings ranks better than 78.61% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Billington Holdings's current ratio for the quarter that ended in Dec. 2025 was 2.49.
Billington Holdings has a current ratio of 2.49. It generally indicates good short-term financial strength.
The historical rank and industry rank for Billington Holdings's Current Ratio or its related term are showing as below:
LSE:BILN'
s Current Ratio Range Over the Past 10 Years
Min: 1.43 Med: 1.68 Max: 2.49
Current: 2.49
During the past 13 years, Billington Holdings's highest Current Ratio was 2.49. The lowest was 1.43. And the median was 1.68.
LSE:BILN's Current Ratio is ranked better than 78.61% of 1781
companies
in the Construction industry
Industry Median: 1.58
vs LSE:BILN: 2.49
Billington Holdings (LSE:BILN) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Billington Holdings Current Ratio Related Terms
Billington Holdings Current Ratio Historical Data
* Premium members only.
The historical data trend for Billington Holdings's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
LSE:BILN vs PWR, FIX, EME: Current Ratio Comparison
For the Engineering & Construction subindustry, Billington Holdings's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Billington Holdings Current Ratio vs Construction Industry
For the Construction industry and Industrials sector, Billington Holdings's Current Ratio distribution charts can be found below:
* The bar in red indicates where Billington Holdings's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Billington Holdings (LSE:BILN) has a Current Ratio of 2.49 as of Dec. 2025. This is 48% above median its historical median of 1.68. Over the past decade, Billington Holdings' Current Ratio has ranged from 1.43 to 2.49. According to the industry distribution chart, Billington Holdings ranks #381 out of 1781 companies in the Construction industry, placing it in the top 21.4%.
Is Billington Holdings' Current Ratio too high?
Billington Holdings' current Current Ratio of 2.49 is 48% above median its 10-year median of 1.68. Over the past 10 years, this metric has ranged from a low of 1.43 to a high of 2.49. The Construction industry median Current Ratio is 1.58. Billington Holdings' value of 2.49 is 57.6% above this industry median. Based on the distribution chart, Billington Holdings ranks #381 out of 1781 companies in the Construction industry, which is in the top quartile — a strong position relative to peers. Overall, Billington Holdings has a GF Score™ of 76/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Billington Holdings' Current Ratio compare to PWR and FIX?
According to the Construction industry distribution chart, Billington Holdings ranks #381 out of 1781 companies for Current Ratio. This places Billington Holdings in the top 21% of its industry — outperforming the majority of peers. The industry median Current Ratio is 1.58. Billington Holdings' value of 2.49 is 57.6% above this benchmark. Historically, Billington Holdings' own Current Ratio has ranged from 1.43 to 2.49 over the past decade. While the company's 10-year median is 1.68 vs. the industry median of 1.58, Billington Holdings has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for a Construction company?
The median Current Ratio among Construction companies is 1.58, based on 1,781 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Billington Holdings's current Current Ratio of 2.49 is 57.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Construction industry, the median Current Ratio is 1.58 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Billington Holdings's current Current Ratio is 2.49, which is 48% above median its own 10-year median of 1.68. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Billington Holdings stock overvalued right now?
Based on GuruFocus' analysis, Billington Holdings (LSE:BILN) is currently considered Fairly Valued. The stock's GF Value™ is £4.10, compared to a current price of £4.10 — trading right at its estimated fair value. The current Current Ratio is 2.49, which is 48% above median its 10-year median of 1.68 and 57.6% above the Construction industry median of 1.58. Billington Holdings' overall GF Score™ is 76/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Billington Holdings (LSE:BILN), the current Current Ratio is 2.49 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Billington Holdings (LSE:BILN) Overvalued in 2026?
Based on GuruFocus' analysis, Billington Holdings stock appears to be undervalued.
The current stock price of £4.10 is trading 0% below its estimated GF Value™ of £4.10.
GuruFocus considers Billington Holdings to be Fairly Valued.
Key valuation signals for LSE:BILN:
Current Ratio: 2.49 (48% above median its 10-year median of 1.68)
GF Value™: £4.10 vs. price of £4.10 (0% below fair value)
Industry Position: 57.6% above the Construction median (#381 of 1781)
No single metric tells the full story. See the LSE:BILN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Billington Holdings PLC through its subsidiaries, operates as a structural steel and construction safety solutions specialists, is a UK-based group of companies focused on structural steel and engineering activities throughout the UK and European markets. It also acts as a supplier of safety solutions and barrier systems to the construction industry. It operates in two segments: Structural Steelwork and Safety Solutions. Structural Steelwork, which generates key revenue that includes the activities of Billington Structures Limited, Peter Marshall Steel Stairs Limited, and Specialist Protective Coatings Limited. Geographically, it derives all of its revenue from the United Kingdom.
76GF Score
Get the complete analysis for LSE:BILN
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
LSE:BILN has been successfully added to your 
