Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Ahlada EngineersNSE:AHLADA -1.14%78 Current Ratio is 2.07 as of Sep. 2025, which is 29% above its 10-year median of 1.60. GuruFocus rates NSE:AHLADA with a GF Score™ of 78/100 and a GF Value™ of ₹61.66 (Significantly Undervalued). The stock has 7 warning signs investors should review. Among 1,784 Construction companies, Ahlada Engineers ranks better than 69% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Ahlada Engineers's current ratio for the quarter that ended in Sep. 2025 was 2.07.
Ahlada Engineers has a current ratio of 2.07. It generally indicates good short-term financial strength.
The historical rank and industry rank for Ahlada Engineers's Current Ratio or its related term are showing as below:
NSE:AHLADA'
s Current Ratio Range Over the Past 10 Years
Min: 1.1 Med: 1.6 Max: 2.14
Current: 2.07
During the past 12 years, Ahlada Engineers's highest Current Ratio was 2.14. The lowest was 1.10. And the median was 1.60.
NSE:AHLADA's Current Ratio is ranked better than 69% of 1784
companies
in the Construction industry
Industry Median: 1.58
vs NSE:AHLADA: 2.07
Ahlada Engineers (NSE:AHLADA) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Ahlada Engineers Current Ratio Related Terms
Ahlada Engineers Current Ratio Historical Data
* Premium members only.
The historical data trend for Ahlada Engineers's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:AHLADA vs TT, JCI, CARR: Current Ratio Comparison
For the Building Products & Equipment subindustry, Ahlada Engineers's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ahlada Engineers Current Ratio vs Construction Industry
For the Construction industry and Industrials sector, Ahlada Engineers's Current Ratio distribution charts can be found below:
* The bar in red indicates where Ahlada Engineers's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Ahlada Engineers (NSE:AHLADA) has a Current Ratio of 2.07 as of Sep. 2025. This is 29% above median its historical median of 1.60. Over the past decade, Ahlada Engineers' Current Ratio has ranged from 1.10 to 2.14. According to the industry distribution chart, Ahlada Engineers ranks #553 out of 1784 companies in the Construction industry, placing it in the top 31%.
Is Ahlada Engineers' Current Ratio too high?
Ahlada Engineers' current Current Ratio of 2.07 is 29% above median its 10-year median of 1.60. Over the past 10 years, this metric has ranged from a low of 1.10 to a high of 2.14. The Construction industry median Current Ratio is 1.58. Ahlada Engineers' value of 2.07 is 31% above this industry median. Based on the distribution chart, Ahlada Engineers ranks #553 out of 1784 companies in the Construction industry, which is above the industry midpoint. Overall, Ahlada Engineers has a GF Score™ of 78/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Ahlada Engineers' Current Ratio compare to TT and JCI?
According to the Construction industry distribution chart, Ahlada Engineers ranks #553 out of 1784 companies for Current Ratio. This puts Ahlada Engineers in the upper half of its industry. The industry median Current Ratio is 1.58. Ahlada Engineers' value of 2.07 is 31% above this benchmark. Historically, Ahlada Engineers' own Current Ratio has ranged from 1.10 to 2.14 over the past decade. While the company's 10-year median is 1.60 vs. the industry median of 1.58, Ahlada Engineers has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for a Construction company?
The median Current Ratio among Construction companies is 1.58, based on 1,784 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ahlada Engineers's current Current Ratio of 2.07 is 31% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Construction industry, the median Current Ratio is 1.58 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ahlada Engineers's current Current Ratio is 2.07, which is 29% above median its own 10-year median of 1.60. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ahlada Engineers stock overvalued right now?
Based on GuruFocus' analysis, Ahlada Engineers (NSE:AHLADA) is currently considered Significantly Undervalued. The stock's GF Value™ is ₹61.66, compared to a current price of ₹36.40 — trading 41% below its estimated fair value. The current Current Ratio is 2.07, which is 29% above median its 10-year median of 1.60 and 31% above the Construction industry median of 1.58. Ahlada Engineers' overall GF Score™ is 78/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Ahlada Engineers (NSE:AHLADA), the current Current Ratio is 2.07 as of Sep. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ahlada Engineers (NSE:AHLADA) Overvalued in 2026?
Based on GuruFocus' analysis, Ahlada Engineers stock appears to be undervalued.
The current stock price of ₹36.40 is trading 41% below its estimated GF Value™ of ₹61.66.
GuruFocus considers Ahlada Engineers to be Significantly Undervalued.
Key valuation signals for NSE:AHLADA:
Current Ratio: 2.07 (29% above median its 10-year median of 1.60)
GF Value™: ₹61.66 vs. price of ₹36.40 (41% below fair value)
Industry Position: 31% above the Construction median (#553 of 1784)
No single metric tells the full story. See the NSE:AHLADA stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ahlada Engineers Ltd is engaged in the manufacturing of residential and commercial steel doors and windows in India. Its product offerings include residential steel doors, shutters, panels, residential steel windows, commercial steel doors, drinking water systems, school furniture, and allied products. The company's sole operating segment is Steel Products, and the sole geographical segment is India.
78GF Score
Get the complete analysis for NSE:AHLADA
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:AHLADA has been successfully added to your 
