Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Anawil Wire and EngineeringNSE:ANAWIL -2.83%13 Current Ratio is 1.40 as of Mar. 2026, which is at its 10-year median of 1.40. GuruFocus rates NSE:ANAWIL with a GF Score™ of 13/100. The stock has 3 warning signs investors should review. Among 3,088 Industrial Products companies, Anawil Wire and Engineering ranks worse than 73.12% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Anawil Wire and Engineering's current ratio for the quarter that ended in Mar. 2026 was 1.40.
Anawil Wire and Engineering has a current ratio of 1.40. It generally indicates good short-term financial strength.
The historical rank and industry rank for Anawil Wire and Engineering's Current Ratio or its related term are showing as below:
NSE:ANAWIL'
s Current Ratio Range Over the Past 10 Years
Min: 1.18 Med: 1.4 Max: 1.52
Current: 1.4
During the past 3 years, Anawil Wire and Engineering's highest Current Ratio was 1.52. The lowest was 1.18. And the median was 1.40.
NSE:ANAWIL's Current Ratio is ranked worse than 73.12% of 3088
companies
in the Industrial Products industry
Industry Median: 1.93
vs NSE:ANAWIL: 1.40
Anawil Wire and Engineering (NSE:ANAWIL) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Anawil Wire and Engineering Current Ratio Related Terms
Anawil Wire and Engineering Current Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Anawil Wire and Engineering Current Ratio Chart
Anawil Wire and Engineering Annual Data
Trend
Mar24
Mar25
Mar26
Current Ratio
1.18
1.52
1.40
Anawil Wire and Engineering Semi-Annual Data
Mar24
Mar25
Mar26
Current Ratio
1.18
1.52
1.40
NSE:ANAWIL vs GEV, ETN, PH: Current Ratio Comparison
For the Specialty Industrial Machinery subindustry, Anawil Wire and Engineering's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Anawil Wire and Engineering Current Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Anawil Wire and Engineering's Current Ratio distribution charts can be found below:
* The bar in red indicates where Anawil Wire and Engineering's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Anawil Wire and Engineering (NSE:ANAWIL) has a Current Ratio of 1.40 as of Mar. 2026. This is near median its historical median of 1.40. Over the past decade, Anawil Wire and Engineering's Current Ratio has ranged from 1.18 to 1.52. According to the industry distribution chart, Anawil Wire and Engineering ranks #2258 out of 3088 companies in the Industrial Products industry, placing it in the top 73.1%.
Is Anawil Wire and Engineering's Current Ratio too high?
Anawil Wire and Engineering's current Current Ratio of 1.40 is near median its 10-year median of 1.40. Over the past 10 years, this metric has ranged from a low of 1.18 to a high of 1.52. The Industrial Products industry median Current Ratio is 1.93. Anawil Wire and Engineering's value of 1.40 is 27.5% below this industry median. Based on the distribution chart, Anawil Wire and Engineering ranks #2258 out of 3088 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Anawil Wire and Engineering has a GF Score™ of 13/100, reflecting its overall financial health beyond just this single metric.
How does Anawil Wire and Engineering's Current Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Anawil Wire and Engineering ranks #2258 out of 3088 companies for Current Ratio. This places Anawil Wire and Engineering in the lower half of its industry. The industry median Current Ratio is 1.93. Anawil Wire and Engineering's value of 1.40 is 27.5% below this benchmark. Historically, Anawil Wire and Engineering's own Current Ratio has ranged from 1.18 to 1.52 over the past decade. While the company's 10-year median is 1.40 vs. the industry median of 1.93, Anawil Wire and Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.93, based on 3,088 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Anawil Wire and Engineering's current Current Ratio of 1.40 is 27.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.93 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Anawil Wire and Engineering's current Current Ratio is 1.40, which is near median its own 10-year median of 1.40. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Anawil Wire and Engineering stock overvalued right now?
Anawil Wire and Engineering (NSE:ANAWIL) has a current Current Ratio of 1.40. The current Current Ratio is 1.40, which is near median its 10-year median of 1.40 and 27.5% below the Industrial Products industry median of 1.93. Anawil Wire and Engineering's overall GF Score™ is 13/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Anawil Wire and Engineering (NSE:ANAWIL), the current Current Ratio is 1.40 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Anawil Wire and Engineering Ltd is engaged in the business of manufacturing windmill towers, with a primary focus on the fabrication of towers from heavy and precision steel components customized to meet the specific requirements of clients in the wind energy sector. The company supplies its products to original equipment manufacturers (OEMs) of wind turbine generators (WTGs) and companies operating in the renewable energy sector. The majority of revenue is derived from the tower manufacturing and fabrication business.
13GF Score
Get the complete analysis for NSE:ANAWIL
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:ANAWIL has been successfully added to your 
