Quaser Machine ToolsROCO:4563 61 Current Ratio is 1.42 as of Dec. 2025, which is 23% below its 10-year median of 1.85. GuruFocus rates ROCO:4563 with a GF Score™ of 61/100 and a GF Value™ of NT$56.15 (Modestly Undervalued). The stock has 7 warning signs investors should review. Among 3,075 Industrial Products companies, Quaser Machine Tools ranks worse than 73.11% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Quaser Machine Tools's current ratio for the quarter that ended in Dec. 2025 was 1.42.
Quaser Machine Tools has a current ratio of 1.42. It generally indicates good short-term financial strength.
The historical rank and industry rank for Quaser Machine Tools's Current Ratio or its related term are showing as below:
ROCO:4563'
s Current Ratio Range Over the Past 10 Years
Min: 1.19 Med: 1.85 Max: 2.45
Current: 1.42
During the past 13 years, Quaser Machine Tools's highest Current Ratio was 2.45. The lowest was 1.19. And the median was 1.85.
ROCO:4563's Current Ratio is ranked worse than 73.11% of 3075
companies
in the Industrial Products industry
Industry Median: 1.96
vs ROCO:4563: 1.42
Quaser Machine Tools (ROCO:4563) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Quaser Machine Tools Current Ratio Related Terms
Quaser Machine Tools Current Ratio Historical Data
* Premium members only.
The historical data trend for Quaser Machine Tools's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:4563 vs GEV, ETN, PH: Current Ratio Comparison
For the Specialty Industrial Machinery subindustry, Quaser Machine Tools's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Quaser Machine Tools Current Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Quaser Machine Tools's Current Ratio distribution charts can be found below:
* The bar in red indicates where Quaser Machine Tools's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Quaser Machine Tools (ROCO:4563) has a Current Ratio of 1.42 as of Dec. 2025. This is 23% below median its historical median of 1.85. Over the past decade, Quaser Machine Tools' Current Ratio has ranged from 1.19 to 2.45. According to the industry distribution chart, Quaser Machine Tools ranks #2248 out of 3075 companies in the Industrial Products industry, placing it in the top 73.1%.
Is Quaser Machine Tools' Current Ratio too high?
Quaser Machine Tools' current Current Ratio of 1.42 is 23% below median its 10-year median of 1.85. Over the past 10 years, this metric has ranged from a low of 1.19 to a high of 2.45. The Industrial Products industry median Current Ratio is 1.96. Quaser Machine Tools' value of 1.42 is 27.6% below this industry median. Based on the distribution chart, Quaser Machine Tools ranks #2248 out of 3075 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Quaser Machine Tools has a GF Score™ of 61/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Quaser Machine Tools' Current Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Quaser Machine Tools ranks #2248 out of 3075 companies for Current Ratio. This places Quaser Machine Tools in the lower half of its industry. The industry median Current Ratio is 1.96. Quaser Machine Tools' value of 1.42 is 27.6% below this benchmark. Historically, Quaser Machine Tools' own Current Ratio has ranged from 1.19 to 2.45 over the past decade. While the company's 10-year median is 1.85 vs. the industry median of 1.96, Quaser Machine Tools has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.96, based on 3,075 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Quaser Machine Tools's current Current Ratio of 1.42 is 27.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Quaser Machine Tools's current Current Ratio is 1.42, which is 23% below median its own 10-year median of 1.85. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Quaser Machine Tools stock overvalued right now?
Based on GuruFocus' analysis, Quaser Machine Tools (ROCO:4563) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$56.15, compared to a current price of NT$41.80 — trading 25.6% below its estimated fair value. The current Current Ratio is 1.42, which is 23% below median its 10-year median of 1.85 and 27.6% below the Industrial Products industry median of 1.96. Quaser Machine Tools' overall GF Score™ is 61/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Quaser Machine Tools (ROCO:4563), the current Current Ratio is 1.42 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Quaser Machine Tools (ROCO:4563) Overvalued in 2026?
Based on GuruFocus' analysis, Quaser Machine Tools stock appears to be undervalued.
The current stock price of NT$41.80 is trading 25.6% below its estimated GF Value™ of NT$56.15.
GuruFocus considers Quaser Machine Tools to be Modestly Undervalued.
Key valuation signals for ROCO:4563:
Current Ratio: 1.42 (23% below median its 10-year median of 1.85)
GF Value™: NT$56.15 vs. price of NT$41.80 (25.6% below fair value)
Industry Position: 27.6% below the Industrial Products median (#2248 of 3075)
No single metric tells the full story. See the ROCO:4563 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Quaser Machine Tools Inc is engaged in the manufacturing and sales of computer numerical control (CNC) machine centers, metal-working machines, and related machines. The group has two reportable segments: Computer Numerical Control Machines, engaged in manufacturing and selling computer numerical control machines, and Aerospace Processing Machines, engaged in aerospace processing machines. It derives the majority of its revenue from Aerospace Processing Machines. It generates maximum revenue from Europe.
61GF Score
Get the complete analysis for ROCO:4563
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4563 has been successfully added to your 
