Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Mun Siong EngineeringSGX:MF6 Current Ratio is 1.46 as of Dec. 2025, which is 56% below its 10-year median of 3.33. The stock has 6 warning signs investors should review. Among 1,786 Construction companies, Mun Siong Engineering ranks worse than 55.6% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Mun Siong Engineering's current ratio for the quarter that ended in Dec. 2025 was 1.46.
Mun Siong Engineering has a current ratio of 1.46. It generally indicates good short-term financial strength.
The historical rank and industry rank for Mun Siong Engineering's Current Ratio or its related term are showing as below:
SGX:MF6'
s Current Ratio Range Over the Past 10 Years
Min: 1.46 Med: 3.33 Max: 5.66
Current: 1.46
During the past 13 years, Mun Siong Engineering's highest Current Ratio was 5.66. The lowest was 1.46. And the median was 3.33.
SGX:MF6's Current Ratio is ranked worse than 55.6% of 1786
companies
in the Construction industry
Industry Median: 1.58
vs SGX:MF6: 1.46
Mun Siong Engineering (SGX:MF6) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Mun Siong Engineering Current Ratio Related Terms
Mun Siong Engineering Current Ratio Historical Data
* Premium members only.
The historical data trend for Mun Siong Engineering's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SGX:MF6 vs PWR, FIX, EME: Current Ratio Comparison
For the Engineering & Construction subindustry, Mun Siong Engineering's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mun Siong Engineering Current Ratio vs Construction Industry
For the Construction industry and Industrials sector, Mun Siong Engineering's Current Ratio distribution charts can be found below:
* The bar in red indicates where Mun Siong Engineering's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Mun Siong Engineering (SGX:MF6) has a Current Ratio of 1.46 as of Dec. 2025. This is 56% below median its historical median of 3.33. Over the past decade, Mun Siong Engineering's Current Ratio has ranged from 1.46 to 5.66. According to the industry distribution chart, Mun Siong Engineering ranks #993 out of 1786 companies in the Construction industry, placing it in the top 55.6%.
Is Mun Siong Engineering's Current Ratio too high?
Mun Siong Engineering's current Current Ratio of 1.46 is 56% below median its 10-year median of 3.33. Over the past 10 years, this metric has ranged from a low of 1.46 to a high of 5.66. The Construction industry median Current Ratio is 1.58. Mun Siong Engineering's value of 1.46 is 7.6% below this industry median. Based on the distribution chart, Mun Siong Engineering ranks #993 out of 1786 companies in the Construction industry, which is below the industry midpoint.
How does Mun Siong Engineering's Current Ratio compare to PWR and FIX?
According to the Construction industry distribution chart, Mun Siong Engineering ranks #993 out of 1786 companies for Current Ratio. This places Mun Siong Engineering in the lower half of its industry. The industry median Current Ratio is 1.58. Mun Siong Engineering's value of 1.46 is 7.6% below this benchmark. Historically, Mun Siong Engineering's own Current Ratio has ranged from 1.46 to 5.66 over the past decade. While the company's 10-year median is 3.33 vs. the industry median of 1.58, Mun Siong Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for a Construction company?
The median Current Ratio among Construction companies is 1.58, based on 1,786 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mun Siong Engineering's current Current Ratio of 1.46 is 7.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Construction industry, the median Current Ratio is 1.58 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mun Siong Engineering's current Current Ratio is 1.46, which is 56% below median its own 10-year median of 3.33. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mun Siong Engineering stock overvalued right now?
Based on GuruFocus' analysis, Mun Siong Engineering (SGX:MF6) is currently considered Modestly Undervalued. The stock's GF Value™ is S$0.04, compared to a current price of S$0.03 — trading 25% below its estimated fair value. The current Current Ratio is 1.46, which is 56% below median its 10-year median of 3.33 and 7.6% below the Construction industry median of 1.58. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Mun Siong Engineering (SGX:MF6), the current Current Ratio is 1.46 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Mun Siong Engineering Ltd is engaged in mechanical engineering, provision of specialised services, and investment holding as an integrated engineering solutions provider. The company specializes in turnaround services, turnkey delivery, and EPC (Engineering, Procurement and Construction) projects, serving industries such as oil and gas, petrochemicals, energy, and pharmaceuticals. It offers end-to-end capabilities from engineering design and fabrication to construction and maintenance, and provides services including high pressure water jetting, retubing of heat exchangers, mechanical decoking/air pigging, rotating equipment services, plugging of heat exchangers (Conco Systems), and maintenance and repair of waterous pumps. The company generates the majority of its revenue from Singapore.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SGX:MF6 has been successfully added to your 
