Chung Hung Steel CoTPE:2014 -0.86%47 Current Ratio is 1.47 as of Dec. 2025, which is 5% above its 10-year median of 1.40. GuruFocus rates TPE:2014 with a GF Score™ of 47/100 and a GF Value™ of NT$11.65 (Significantly Overvalued). The stock has 4 warning signs investors should review. Among 635 Steel companies, Chung Hung Steel Co ranks worse than 56.22% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Chung Hung Steel Co's current ratio for the quarter that ended in Dec. 2025 was 1.47.
Chung Hung Steel Co has a current ratio of 1.47. It generally indicates good short-term financial strength.
The historical rank and industry rank for Chung Hung Steel Co's Current Ratio or its related term are showing as below:
TPE:2014'
s Current Ratio Range Over the Past 10 Years
Min: 0.55 Med: 1.4 Max: 1.74
Current: 1.47
During the past 13 years, Chung Hung Steel Co's highest Current Ratio was 1.74. The lowest was 0.55. And the median was 1.40.
TPE:2014's Current Ratio is ranked worse than 56.22% of 635
companies
in the Steel industry
Industry Median: 1.63
vs TPE:2014: 1.47
Chung Hung Steel Co (TPE:2014) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Chung Hung Steel Co Current Ratio Related Terms
Chung Hung Steel Co Current Ratio Historical Data
* Premium members only.
The historical data trend for Chung Hung Steel Co's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2014 vs NUE, STLD, RS: Current Ratio Comparison
For the Steel subindustry, Chung Hung Steel Co's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chung Hung Steel Co Current Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Chung Hung Steel Co's Current Ratio distribution charts can be found below:
* The bar in red indicates where Chung Hung Steel Co's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Chung Hung Steel Co (TPE:2014) has a Current Ratio of 1.47 as of Dec. 2025. This is near median its historical median of 1.40. Over the past decade, Chung Hung Steel Co's Current Ratio has ranged from 0.55 to 1.74. According to the industry distribution chart, Chung Hung Steel Co ranks #357 out of 635 companies in the Steel industry, placing it in the top 56.2%.
Is Chung Hung Steel Co's Current Ratio too high?
Chung Hung Steel Co's current Current Ratio of 1.47 is near median its 10-year median of 1.40. Over the past 10 years, this metric has ranged from a low of 0.55 to a high of 1.74. The Steel industry median Current Ratio is 1.63. Chung Hung Steel Co's value of 1.47 is 9.8% below this industry median. Based on the distribution chart, Chung Hung Steel Co ranks #357 out of 635 companies in the Steel industry, which is below the industry midpoint. Overall, Chung Hung Steel Co has a GF Score™ of 47/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Chung Hung Steel Co's Current Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Chung Hung Steel Co ranks #357 out of 635 companies for Current Ratio. This places Chung Hung Steel Co in the lower half of its industry. The industry median Current Ratio is 1.63. Chung Hung Steel Co's value of 1.47 is 9.8% below this benchmark. Historically, Chung Hung Steel Co's own Current Ratio has ranged from 0.55 to 1.74 over the past decade. While the company's 10-year median is 1.40 vs. the industry median of 1.63, Chung Hung Steel Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for a Steel company?
The median Current Ratio among Steel companies is 1.63, based on 635 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chung Hung Steel Co's current Current Ratio of 1.47 is 9.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Steel industry, the median Current Ratio is 1.63 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chung Hung Steel Co's current Current Ratio is 1.47, which is near median its own 10-year median of 1.40. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chung Hung Steel Co stock overvalued right now?
Based on GuruFocus' analysis, Chung Hung Steel Co (TPE:2014) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$11.65, compared to a current price of NT$17.25 — trading 48.1% above its estimated fair value. The current Current Ratio is 1.47, which is near median its 10-year median of 1.40 and 9.8% below the Steel industry median of 1.63. Chung Hung Steel Co's overall GF Score™ is 47/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Chung Hung Steel Co (TPE:2014), the current Current Ratio is 1.47 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chung Hung Steel Co (TPE:2014) Overvalued in 2026?
Based on GuruFocus' analysis, Chung Hung Steel Co stock appears to be overvalued.
The current stock price of NT$17.25 is trading 48.1% above its estimated GF Value™ of NT$11.65.
GuruFocus considers Chung Hung Steel Co to be Significantly Overvalued.
Key valuation signals for TPE:2014:
Current Ratio: 1.47 (near median its 10-year median of 1.40)
GF Value™: NT$11.65 vs. price of NT$17.25 (48.1% above fair value)
Industry Position: 9.8% below the Steel median (#357 of 635)
No single metric tells the full story. See the TPE:2014 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chung Hung Steel Co Ltd is engaged in the manufacturing, processing, and distribution of steel products. The company produces steel products, including hot and cold galvanized coils, fine blanking coils, hot rolled temper grade coils, hot rolled pickled and oiled coils, and hot rolled bands. It has two operating segments: The Corporation segment which manufactures, processes and sells steel products, and Other corporations segment which includes Hung Kao Investment Corporation engaged in general investment. Geographically, the company derives a majority of revenue from Taiwan and also has a presence in Asia, America, Europe and Others.
47GF Score
Get the complete analysis for TPE:2014
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2014 has been successfully added to your 
