FitTech CoTPE:6706 +2.53%47 Current Ratio is 2.42 as of Dec. 2025, which is 12% above its 10-year median of 2.16. GuruFocus rates TPE:6706 with a GF Score™ of 47/100 and a GF Value™ of NT$44.46 (Significantly Overvalued). The stock has 9 warning signs investors should review. Among 3,072 Industrial Products companies, FitTech Co ranks better than 63.22% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. FitTech Co's current ratio for the quarter that ended in Dec. 2025 was 2.42.
FitTech Co has a current ratio of 2.42. It generally indicates good short-term financial strength.
The historical rank and industry rank for FitTech Co's Current Ratio or its related term are showing as below:
TPE:6706'
s Current Ratio Range Over the Past 10 Years
Min: 1.38 Med: 2.16 Max: 3.09
Current: 2.42
During the past 12 years, FitTech Co's highest Current Ratio was 3.09. The lowest was 1.38. And the median was 2.16.
TPE:6706's Current Ratio is ranked better than 63.22% of 3072
companies
in the Industrial Products industry
Industry Median: 1.97
vs TPE:6706: 2.42
FitTech Co (TPE:6706) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
FitTech Co Current Ratio Related Terms
FitTech Co Current Ratio Historical Data
* Premium members only.
The historical data trend for FitTech Co's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:6706 vs GEV, ETN, PH: Current Ratio Comparison
For the Specialty Industrial Machinery subindustry, FitTech Co's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
FitTech Co Current Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, FitTech Co's Current Ratio distribution charts can be found below:
* The bar in red indicates where FitTech Co's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
FitTech Co (TPE:6706) has a Current Ratio of 2.42 as of Dec. 2025. This is 12% above median its historical median of 2.16. Over the past decade, FitTech Co's Current Ratio has ranged from 1.38 to 3.09. According to the industry distribution chart, FitTech Co ranks #1130 out of 3072 companies in the Industrial Products industry, placing it in the top 36.8%.
Is FitTech Co's Current Ratio too high?
FitTech Co's current Current Ratio of 2.42 is 12% above median its 10-year median of 2.16. Over the past 10 years, this metric has ranged from a low of 1.38 to a high of 3.09. The Industrial Products industry median Current Ratio is 1.97. FitTech Co's value of 2.42 is 22.8% above this industry median. Based on the distribution chart, FitTech Co ranks #1130 out of 3072 companies in the Industrial Products industry, which is above the industry midpoint. Overall, FitTech Co has a GF Score™ of 47/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does FitTech Co's Current Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, FitTech Co ranks #1130 out of 3072 companies for Current Ratio. This puts FitTech Co in the upper half of its industry. The industry median Current Ratio is 1.97. FitTech Co's value of 2.42 is 22.8% above this benchmark. Historically, FitTech Co's own Current Ratio has ranged from 1.38 to 3.09 over the past decade. While the company's 10-year median is 2.16 vs. the industry median of 1.97, FitTech Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.97, based on 3,072 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. FitTech Co's current Current Ratio of 2.42 is 22.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.97 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. FitTech Co's current Current Ratio is 2.42, which is 12% above median its own 10-year median of 2.16. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is FitTech Co stock overvalued right now?
Based on GuruFocus' analysis, FitTech Co (TPE:6706) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$44.46, compared to a current price of NT$142.00 — trading 219.4% above its estimated fair value. The current Current Ratio is 2.42, which is 12% above median its 10-year median of 2.16 and 22.8% above the Industrial Products industry median of 1.97. FitTech Co's overall GF Score™ is 47/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For FitTech Co (TPE:6706), the current Current Ratio is 2.42 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is FitTech Co (TPE:6706) Overvalued in 2026?
Based on GuruFocus' analysis, FitTech Co stock appears to be overvalued.
The current stock price of NT$142.00 is trading 219.4% above its estimated GF Value™ of NT$44.46.
GuruFocus considers FitTech Co to be Significantly Overvalued.
Key valuation signals for TPE:6706:
Current Ratio: 2.42 (12% above median its 10-year median of 2.16)
GF Value™: NT$44.46 vs. price of NT$142.00 (219.4% above fair value)
Industry Position: 22.8% above the Industrial Products median (#1130 of 3072)
No single metric tells the full story. See the TPE:6706 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
FitTech Co Ltd mainly engages in the manufacture and wholesale of machinery equipment, general instruments, optical instruments, other optical and precision machinery, industry of intellectual property rights, information software services, research and development services, and international trade. The Group is mainly engaged in R&D, production, and sales of optics testing equipment, laser machining equipment, and OEM optics testing. Products and solutions are LED/MiniLED Test Solutions, MicroLED Test and Transfer Solution, Micro LED solutions, Laser Micromachining Solutions, and others. Its products and service revenue are sales of machines, OEM, and others. It generates maximum revenue from Asia.
47GF Score
Get the complete analysis for TPE:6706
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:6706 has been successfully added to your 
