Denison MinesTSX:DML +0.46%62 Current Ratio is 13.77 as of Mar. 2026, which is 251% above its 10-year median of 3.92. GuruFocus rates TSX:DML with a GF Score™ of 62/100 and a GF Value™ of C$2.66 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 184 Other Energy Sources companies, Denison Mines ranks better than 90.22% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Denison Mines's current ratio for the quarter that ended in Mar. 2026 was 13.77.
Denison Mines has a current ratio of 13.77. It indicates the company may not be efficiently using its current assets or its short-term financing facilities. This may also indicate problems in working capital management.
The historical rank and industry rank for Denison Mines's Current Ratio or its related term are showing as below:
TSX:DML'
s Current Ratio Range Over the Past 10 Years
Min: 1.11 Med: 3.92 Max: 13.77
Current: 13.77
During the past 13 years, Denison Mines's highest Current Ratio was 13.77. The lowest was 1.11. And the median was 3.92.
TSX:DML's Current Ratio is ranked better than 90.22% of 184
companies
in the Other Energy Sources industry
Industry Median: 1.88
vs TSX:DML: 13.77
Denison Mines (TSX:DML) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Denison Mines Current Ratio Related Terms
Denison Mines Current Ratio Historical Data
* Premium members only.
The historical data trend for Denison Mines's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Uranium subindustry, Denison Mines's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Denison Mines Current Ratio vs Other Energy Sources Industry
For the Other Energy Sources industry and Energy sector, Denison Mines's Current Ratio distribution charts can be found below:
* The bar in red indicates where Denison Mines's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Denison Mines (TSX:DML) has a Current Ratio of 13.77 as of Mar. 2026. This is 251% above median its historical median of 3.92. Over the past decade, Denison Mines' Current Ratio has ranged from 1.11 to 13.77. According to the industry distribution chart, Denison Mines ranks #18 out of 184 companies in the Other Energy Sources industry, placing it in the top 9.8%.
Is Denison Mines' Current Ratio too high?
Denison Mines' current Current Ratio of 13.77 is 251% above median its 10-year median of 3.92. Over the past 10 years, this metric has ranged from a low of 1.11 to a high of 13.77. The Other Energy Sources industry median Current Ratio is 1.88. Denison Mines' value of 13.77 is 632.4% above this industry median. Based on the distribution chart, Denison Mines ranks #18 out of 184 companies in the Other Energy Sources industry, which is in the top quartile — a strong position relative to peers. Overall, Denison Mines has a GF Score™ of 62/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Denison Mines' Current Ratio compare to UEC and LEU?
According to the Other Energy Sources industry distribution chart, Denison Mines ranks #18 out of 184 companies for Current Ratio. This places Denison Mines in the top 10% of its industry — outperforming the majority of peers. The industry median Current Ratio is 1.88. Denison Mines' value of 13.77 is 632.4% above this benchmark. Historically, Denison Mines' own Current Ratio has ranged from 1.11 to 13.77 over the past decade. While the company's 10-year median is 3.92 vs. the industry median of 1.88, Denison Mines has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Other Energy Sources company?
The median Current Ratio among Other Energy Sources companies is 1.88, based on 184 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Denison Mines's current Current Ratio of 13.77 is 632.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Other Energy Sources industry, the median Current Ratio is 1.88 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Denison Mines's current Current Ratio is 13.77, which is 251% above median its own 10-year median of 3.92. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Denison Mines stock overvalued right now?
Based on GuruFocus' analysis, Denison Mines (TSX:DML) is currently considered Significantly Overvalued. The stock's GF Value™ is C$2.66, compared to a current price of C$4.39 — trading 65% above its estimated fair value. The current Current Ratio is 13.77, which is 251% above median its 10-year median of 3.92 and 632.4% above the Other Energy Sources industry median of 1.88. Denison Mines' overall GF Score™ is 62/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Denison Mines (TSX:DML), the current Current Ratio is 13.77 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Denison Mines (TSX:DML) Overvalued in 2026?
Based on GuruFocus' analysis, Denison Mines stock appears to be overvalued.
The current stock price of C$4.39 is trading 65% above its estimated GF Value™ of C$2.66.
GuruFocus considers Denison Mines to be Significantly Overvalued.
Key valuation signals for TSX:DML:
Current Ratio: 13.77 (251% above median its 10-year median of 3.92)
GF Value™: C$2.66 vs. price of C$4.39 (65% above fair value)
Industry Position: 632.4% above the Other Energy Sources median (#18 of 184)
No single metric tells the full story. See the TSX:DML stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Denison Mines Corp is engaged in uranium mining-related activities, including the acquisition, exploration, development, and mining of uranium-bearing properties, as well as the processing, sale, and investment in uranium. The company's key properties include Wheeler River, Waterbury Lake, McClean Lake, Midwest, and others. It operates through two segments: the Mining segment and the Corporate and Other segment. The majority of the company's revenue is generated from the Mining segment, which includes activities related to exploration, evaluation, and development, mining, milling (including toll milling), and the sale of mineral concentrates.
62GF Score
Get the complete analysis for TSX:DML
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSX:DML has been successfully added to your 
