Diagnostic Medical SystemsXPAR:ALDMS -0.40%68 Current Ratio is 1.37 as of Dec. 2025, which is 1% above its 10-year median of 1.36. GuruFocus rates XPAR:ALDMS with a GF Score™ of 68/100 and a GF Value™ of €1.14 (Fairly Valued). The stock has 4 warning signs investors should review. Among 854 Medical Devices & Instruments companies, Diagnostic Medical Systems ranks worse than 79.74% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Diagnostic Medical Systems's current ratio for the quarter that ended in Dec. 2025 was 1.37.
Diagnostic Medical Systems has a current ratio of 1.37. It generally indicates good short-term financial strength.
The historical rank and industry rank for Diagnostic Medical Systems's Current Ratio or its related term are showing as below:
XPAR:ALDMS'
s Current Ratio Range Over the Past 10 Years
Min: 1.09 Med: 1.36 Max: 2.09
Current: 1.37
During the past 13 years, Diagnostic Medical Systems's highest Current Ratio was 2.09. The lowest was 1.09. And the median was 1.36.
XPAR:ALDMS's Current Ratio is ranked worse than 79.74% of 854
companies
in the Medical Devices & Instruments industry
Industry Median: 2.475
vs XPAR:ALDMS: 1.37
Diagnostic Medical Systems (XPAR:ALDMS) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Diagnostic Medical Systems Current Ratio Related Terms
Diagnostic Medical Systems Current Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
XPAR:ALDMS vs ABT, SYK, MDT: Current Ratio Comparison
For the Medical Devices subindustry, Diagnostic Medical Systems's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Diagnostic Medical Systems Current Ratio vs Medical Devices & Instruments Industry
For the Medical Devices & Instruments industry and Healthcare sector, Diagnostic Medical Systems's Current Ratio distribution charts can be found below:
* The bar in red indicates where Diagnostic Medical Systems's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Diagnostic Medical Systems (XPAR:ALDMS) has a Current Ratio of 1.37 as of Dec. 2025. This is near median its historical median of 1.36. Over the past decade, Diagnostic Medical Systems' Current Ratio has ranged from 1.09 to 2.09. According to the industry distribution chart, Diagnostic Medical Systems ranks #681 out of 854 companies in the Medical Devices & Instruments industry, placing it in the top 79.7%.
Is Diagnostic Medical Systems' Current Ratio too high?
Diagnostic Medical Systems' current Current Ratio of 1.37 is near median its 10-year median of 1.36. Over the past 10 years, this metric has ranged from a low of 1.09 to a high of 2.09. The Medical Devices & Instruments industry median Current Ratio is 2.48. Diagnostic Medical Systems' value of 1.37 is 44.6% below this industry median. Based on the distribution chart, Diagnostic Medical Systems ranks #681 out of 854 companies in the Medical Devices & Instruments industry, which is in the bottom quartile relative to peers. Overall, Diagnostic Medical Systems has a GF Score™ of 68/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Diagnostic Medical Systems' Current Ratio compare to ABT and SYK?
According to the Medical Devices & Instruments industry distribution chart, Diagnostic Medical Systems ranks #681 out of 854 companies for Current Ratio. This places Diagnostic Medical Systems in the lower half of its industry. The industry median Current Ratio is 2.48. Diagnostic Medical Systems' value of 1.37 is 44.6% below this benchmark. Historically, Diagnostic Medical Systems' own Current Ratio has ranged from 1.09 to 2.09 over the past decade. While the company's 10-year median is 1.36 vs. the industry median of 2.48, Diagnostic Medical Systems has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for a Medical Devices & Instruments company?
The median Current Ratio among Medical Devices & Instruments companies is 2.48, based on 854 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Diagnostic Medical Systems's current Current Ratio of 1.37 is 44.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Medical Devices & Instruments industry, the median Current Ratio is 2.48 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Diagnostic Medical Systems's current Current Ratio is 1.37, which is near median its own 10-year median of 1.36. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Diagnostic Medical Systems stock overvalued right now?
Based on GuruFocus' analysis, Diagnostic Medical Systems (XPAR:ALDMS) is currently considered Fairly Valued. The stock's GF Value™ is €1.14, compared to a current price of €1.25 — trading 9.2% above its estimated fair value. The current Current Ratio is 1.37, which is near median its 10-year median of 1.36 and 44.6% below the Medical Devices & Instruments industry median of 2.48. Diagnostic Medical Systems' overall GF Score™ is 68/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Diagnostic Medical Systems (XPAR:ALDMS), the current Current Ratio is 1.37 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Diagnostic Medical Systems (XPAR:ALDMS) Overvalued in 2026?
Based on GuruFocus' analysis, Diagnostic Medical Systems stock appears to be overvalued.
The current stock price of €1.25 is trading 9.2% above its estimated GF Value™ of €1.14.
GuruFocus considers Diagnostic Medical Systems to be Fairly Valued.
Key valuation signals for XPAR:ALDMS:
Current Ratio: 1.37 (near median its 10-year median of 1.36)
GF Value™: €1.14 vs. price of €1.25 (9.2% above fair value)
Industry Position: 44.6% below the Medical Devices & Instruments median (#681 of 854)
No single metric tells the full story. See the XPAR:ALDMS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Diagnostic Medical Systems is France's company engaged in the development, design, and production of imaging systems for digital and conventional radiology and osteodensitometry. The group's activity is organized around two sectors: Radiology equipment and osteodensitometers sales: mobile radiology units, floating table tops, operating room mobile amplifiers, ultrasound osteodensitometers (designed to chart the bone micro-architecture) and X ray osteodensitometers (designed to measure bone density), etc. The group also proposes devices distribution and maintenance activities; and the Development of biotechnology solutions: in the fields of arthrosis treatment and regenerative medicine.
68GF Score
Get the complete analysis for XPAR:ALDMS
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XPAR:ALDMS has been successfully added to your 
