Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Facor AlloysBOM:532656 +2.46%45 Cyclically Adjusted PB Ratio is 0.28 as of Sep. 15, 2026, which is 7% below its 10-year median of 0.30. GuruFocus rates BOM:532656 with a GF Score™ of 45/100 and a GF Value™ of ₹1.45 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 412 Steel companies, Facor Alloys ranks worse than 242718.2% on this metric.
The historical rank and industry rank for Facor Alloys's Cyclically Adjusted PB Ratio or its related term are showing as below:
During the past 13 years, Facor Alloys's highest Cyclically Adjusted PB Ratio was 0.50. The lowest was 0.23. And the median was 0.30.
BOM:532656's Cyclically Adjusted PB Ratio is not ranked *
in the Steel industry.
Industry Median: 0.81 * Ranked among companies with meaningful Cyclically Adjusted PB Ratio only.
The Shiller PE Ratio was first used by professor Robert Shiller. He uses E10 for his Shiller PE Ratio calculation. E10 is the average of the inflation adjusted earnings per share of a company over the past 10 years. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PB Ratio. The Cyclically Adjusted Book per Share is the average of the inflation adjusted book value per share of a company over the past 10 years.
Facor Alloys's adjusted book value per share data of for the fiscal year that ended in Mar26 was ₹4.403. Add all the adjusted book value per share for the past 10 years together and divide the count will get our Cyclically Adjusted Book per Share, which is ₹10.42 for the trailing ten years ended in Mar26.
Shiller PE for Stocks: The True Measure of Stock Valuation
Facor Alloys (BOM:532656) Cyclically Adjusted PB Ratio Explanation
Compared with the regular PB Ratio, which works poorly for cyclical businesses, the Cyclically Adjusted PB Ratio smoothed out the fluctuations of book value during business cycles. Therefore it is more accurate in reflecting the valuation of the company.
If a company has consistent business performance, the Cyclically Adjusted PB Ratio should give similar results to regular PB Ratio.
Facor Alloys Cyclically Adjusted PB Ratio Related Terms
Facor Alloys Cyclically Adjusted PB Ratio Historical Data
* Premium members only.
The historical data trend for Facor Alloys's Cyclically Adjusted PB Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:532656 vs NUE, STLD, RS: Cyclically Adjusted PB Ratio Comparison
For the Steel subindustry, Facor Alloys's Cyclically Adjusted PB Ratio, along with its competitors' market caps and Cyclically Adjusted PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Facor Alloys Cyclically Adjusted PB Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Facor Alloys's Cyclically Adjusted PB Ratio distribution charts can be found below:
* The bar in red indicates where Facor Alloys's Cyclically Adjusted PB Ratio falls into.
Facor Alloys Cyclically Adjusted PB Ratio Calculation
Like the Shiller PE Ratio, the Cyclically Adjusted PB Ratio takes the Book Value per Share from the past 10 years, adjusts it for inflation, and then calculates the average. This average is then used for the P/B calculation. Because it considers this 10-year average, it's often referred to as the CAPB Ratio.
The Shiller PE Ratio was first used by professor Robert Shiller to measure the valuation of the overall market. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PB Ratio.
Facor Alloys's Cyclically Adjusted PB Ratio for today is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
What does a Cyclically Adjusted PB Ratio of 0.28 mean?
Facor Alloys (BOM:532656) has a Cyclically Adjusted PB Ratio of 0.28 as of Sep. 15, 2026. Cyclically Adjusted PB Ratio is the ratio of share price to a company's inflation-adjusted book value per share over a 10-year period. View historical data on Facor Alloys and its competitors. This is near median its historical median of 0.30. Over the past decade, Facor Alloys' Cyclically Adjusted PB Ratio has ranged from 0.23 to 0.50. According to the industry distribution chart, Facor Alloys ranks #999999 out of 412 companies in the Steel industry.
Is Facor Alloys' Cyclically Adjusted PB Ratio too high?
Facor Alloys' current Cyclically Adjusted PB Ratio of 0.28 is near median its 10-year median of 0.30. Over the past 10 years, this metric has ranged from a low of 0.23 to a high of 0.50. The Steel industry median Cyclically Adjusted PB Ratio is 0.81. Facor Alloys' value of 0.28 is 65.4% below this industry median. Based on the distribution chart, Facor Alloys ranks #999999 out of 412 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Facor Alloys has a GF Score™ of 45/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Facor Alloys' Cyclically Adjusted PB Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Facor Alloys ranks #999999 out of 412 companies for Cyclically Adjusted PB Ratio. This places Facor Alloys in the lower half of its industry. The industry median Cyclically Adjusted PB Ratio is 0.81. Facor Alloys' value of 0.28 is 65.4% below this benchmark. Historically, Facor Alloys' own Cyclically Adjusted PB Ratio has ranged from 0.23 to 0.50 over the past decade. While the company's 10-year median is 0.30 vs. the industry median of 0.81, Facor Alloys has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Cyclically Adjusted PB Ratio for a Steel company?
The median Cyclically Adjusted PB Ratio among Steel companies is 0.81, based on 412 companies in the industry. Companies in the top quartile (top 25%) have a Cyclically Adjusted PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, Cyclically Adjusted PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Facor Alloys's current Cyclically Adjusted PB Ratio of 0.28 is 65.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Cyclically Adjusted PB Ratio mean?
A high Cyclically Adjusted PB Ratio can signal that a stock is expensive relative to its fundamentals. Cyclically Adjusted PB Ratio is the ratio of share price to a company's inflation-adjusted book value per share over a 10-year period. View historical data on Facor Alloys and its competitors. For the Steel industry, the median Cyclically Adjusted PB Ratio is 0.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Facor Alloys's current Cyclically Adjusted PB Ratio is 0.28, which is near median its own 10-year median of 0.30. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Facor Alloys stock overvalued right now?
Based on GuruFocus' analysis, Facor Alloys (BOM:532656) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹1.45, compared to a current price of ₹2.92 — trading 101.4% above its estimated fair value. The current Cyclically Adjusted PB Ratio is 0.28, which is near median its 10-year median of 0.30 and 65.4% below the Steel industry median of 0.81. Facor Alloys' overall GF Score™ is 45/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Cyclically Adjusted PB Ratio calculated?
Cyclically Adjusted PB Ratio is calculated from a company's financial statements. For Facor Alloys (BOM:532656), the current Cyclically Adjusted PB Ratio is 0.28 as of Sep. 15, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Facor Alloys (BOM:532656) Overvalued in 2026?
Based on GuruFocus' analysis, Facor Alloys stock appears to be overvalued.
The current stock price of ₹2.92 is trading 101.4% above its estimated GF Value™ of ₹1.45.
GuruFocus considers Facor Alloys to be Significantly Overvalued.
Key valuation signals for BOM:532656:
Cyclically Adjusted PB Ratio: 0.28 (near median its 10-year median of 0.30)
GF Value™: ₹1.45 vs. price of ₹2.92 (101.4% above fair value)
Industry Position: 65.4% below the Steel median (#999999 of 412)
No single metric tells the full story. See the BOM:532656 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Facor Alloys Ltd is an India-based company. The company mainly operates in the production and sale of high-carbon ferrochrome and silico manganese.. It produces and exports ferroalloy products, which are used in the manufacture of steel and stainless steel. Geographically, it derives a majority of its revenue from India.
45GF Score
Get the complete analysis for BOM:532656
Cyclically Adjusted PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:532656 has been successfully added to your 
