Datron AGHAM:DAR 45 Days Inventory is 366.03 as of Jun. 2025, which is 69% above its 10-year median of 216.99. GuruFocus rates HAM:DAR with a GF Score™ of 45/100 and a GF Value™ of €0.52 (Significantly Overvalued). The stock has 9 warning signs investors should review. Among 2,963 Industrial Products companies, Datron AG ranks worse than 91.8% on this metric.
Days Inventory is also known as Days Sales of Inventory (DSI). Datron AG's Average Total Inventories for the
six
months ended in Jun. 2025 was €20.69 Mil. Datron AG's Cost of Goods Sold for the
six
months ended in Jun. 2025 was €10.32 Mil.
Hence, Datron AG's Days Inventory for the
six
months ended in Jun. 2025 was 366.03.
The historical rank and industry rank for Datron AG's Days Inventory or its related term are showing as below:
HAM:DAR'
s Days Inventory Range Over the Past 10 Years
Min: 176.19 Med: 216.99 Max: 336.07
Current: 336.07
During the past 13 years, Datron AG's highest Days Inventory was 336.07. The lowest was 176.19. And the median was 216.99.
HAM:DAR's Days Inventory is ranked worse than 91.8% of 2963
companies
in the Industrial Products industry
Industry Median: 119.41
vs HAM:DAR: 336.07
Datron AG's Days Inventory
increased
from Jun. 2024 (317.42) to Jun. 2025 (366.03).
It might indicate that Datron AG's sales slowed down.
Inventory Turnover measures how fast the company turns over its inventory within a year.
Datron AG's Inventory Turnover for the
six
months ended in Jun. 2025 was 0.50.
Inventory-to-Revenue determines the ability of a company to manage their inventory levels. It measures the percentage of Inventories the company currently has on hand to support the current amount of Revenue.
Datron AG's Inventory-to-Revenue for the
six
months ended in Jun. 2025 was 0.73.
Datron AG (HAM:DAR) Days Inventory Explanation
Days Inventory indicates the liquidity of the inventory. Generally, a lower Days Inventory is preferred as it indicates a shorter duration to clear off the inventory. An increase of the ratio may indicate the company's sales slowed. Similar ratios related to Days Inventory are:
1. Inventory Turnover measures how fast the company turns over its inventory within a year.
Datron AG's Inventory Turnover for the
six
months ended in Jun. 2025 is calculated as
2. Inventory-to-Revenue determines the ability of a company to manage their inventory levels. It measures the percentage of Inventories the company currently has on hand to support the current amount of Revenue.
Datron AG's Inventory to Revenue for the
six
months ended in Jun. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
A lot of business are seasonable. It makes more sense to compare Days Inventory from the same period in the previous year instead of from the previous quarter.
Datron AG Days Inventory Related Terms
Datron AG Days Inventory Historical Data
* Premium members only.
The historical data trend for Datron AG's Days Inventory can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
HAM:DAR vs GEV, ETN, PH: Days Inventory Comparison
For the Specialty Industrial Machinery subindustry, Datron AG's Days Inventory, along with its competitors' market caps and Days Inventory data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Datron AG Days Inventory vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Datron AG's Days Inventory distribution charts can be found below:
* The bar in red indicates where Datron AG's Days Inventory falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Datron AG (HAM:DAR) has a Days Inventory of 366.03 as of Jun. 2025. Days inventory represents the average amount of days a company holds inventory before selling it. View historical data on Datron AG and its competitors. This is 69% above median its historical median of 216.99. Over the past decade, Datron AG's Days Inventory has ranged from 176.19 to 336.07. According to the industry distribution chart, Datron AG ranks #2720 out of 2963 companies in the Industrial Products industry, placing it in the top 91.8%.
Is Datron AG's Days Inventory too high?
Datron AG's current Days Inventory of 366.03 is 69% above median its 10-year median of 216.99. Over the past 10 years, this metric has ranged from a low of 176.19 to a high of 336.07. The Industrial Products industry median Days Inventory is 119.41. Datron AG's value of 366.03 is 206.5% above this industry median. Based on the distribution chart, Datron AG ranks #2720 out of 2963 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Datron AG has a GF Score™ of 45/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Datron AG's Days Inventory compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Datron AG ranks #2720 out of 2963 companies for Days Inventory. This places Datron AG in the lower half of its industry. The industry median Days Inventory is 119.41. Datron AG's value of 366.03 is 206.5% above this benchmark. Historically, Datron AG's own Days Inventory has ranged from 176.19 to 336.07 over the past decade. While the company's 10-year median is 216.99 vs. the industry median of 119.41, Datron AG has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Days Inventory for an Industrial Products company?
The median Days Inventory among Industrial Products companies is 119.41, based on 2,963 companies in the industry. Companies in the top quartile (top 25%) have a Days Inventory significantly above this median, while those in the bottom quartile fall well below. However, Days Inventory should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Datron AG's current Days Inventory of 366.03 is 206.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Days Inventory mean?
A high Days Inventory can signal that a stock is expensive relative to its fundamentals. Days inventory represents the average amount of days a company holds inventory before selling it. View historical data on Datron AG and its competitors. For the Industrial Products industry, the median Days Inventory is 119.41 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Datron AG's current Days Inventory is 366.03, which is 69% above median its own 10-year median of 216.99. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Datron AG stock overvalued right now?
Based on GuruFocus' analysis, Datron AG (HAM:DAR) is currently considered Significantly Overvalued. The stock's GF Value™ is €0.52, compared to a current price of €7.45 — trading 1332.7% above its estimated fair value. The current Days Inventory is 366.03, which is 69% above median its 10-year median of 216.99 and 206.5% above the Industrial Products industry median of 119.41. Datron AG's overall GF Score™ is 45/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Days Inventory calculated?
Days Inventory is calculated from a company's financial statements. For Datron AG (HAM:DAR), the current Days Inventory is 366.03 as of Jun. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Datron AG (HAM:DAR) Overvalued in 2026?
Based on GuruFocus' analysis, Datron AG stock appears to be overvalued.
The current stock price of €7.45 is trading 1332.7% above its estimated GF Value™ of €0.52.
GuruFocus considers Datron AG to be Significantly Overvalued.
Key valuation signals for HAM:DAR:
Days Inventory: 366.03 (69% above median its 10-year median of 216.99)
GF Value™: €0.52 vs. price of €7.45 (1332.7% above fair value)
Industry Position: 206.5% above the Industrial Products median (#2720 of 2963)
No single metric tells the full story. See the HAM:DAR stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Datron AG group specializes in the development, production, and sale of high-speed CNC milling machines, dental milling machines, high-performance dosing machines, milling tools as well as device-specific software and after-sales services specialized. DATRON high-speed CNC milling machines are particularly suitable for processing future-oriented materials such as aluminum and composite materials. The dental milling machines ensure efficient processing of all common denture materials in dental laboratories. The high-performance metering machines are ideal for industrial sealing and adhesive applications.
45GF Score
Get the complete analysis for HAM:DAR
Days Inventory is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
HAM:DAR has been successfully added to your 
