Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Mold-tek PackagingBOM:533080 -0.22%96 Days Payable is 42.12 as of Jun. 2026, which is 41% above its 10-year median of 29.89. GuruFocus rates BOM:533080 with a GF Score™ of 96/100 and a GF Value™ of ₹905.94 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 383 Packaging & Containers companies, Mold-tek Packaging ranks worse than 71.28% on this metric.
The historical rank and industry rank for Mold-tek Packaging's Days Payable or its related term are showing as below:
BOM:533080'
s Days Payable Range Over the Past 10 Years
Min: 26.41 Med: 29.89 Max: 47.85
Current: 39.55
During the past 13 years, Mold-tek Packaging's highest Days Payable was 47.85. The lowest was 26.41. And the median was 29.89.
BOM:533080's Days Payable is ranked worse than 71.28% of 383
companies
in the Packaging & Containers industry
Industry Median: 57.27
vs BOM:533080: 39.55
Mold-tek Packaging's Days Payable
increased
from Jun. 2025 (30.24) to Jun. 2026 (42.12).
It may suggest that Mold-tek Packagingdelayed paying its suppliers.
Mold-tek Packaging Days Payable Related Terms
Mold-tek Packaging Days Payable Historical Data
* Premium members only.
The historical data trend for Mold-tek Packaging's Days Payable can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:533080 vs SW, PKG, IP: Days Payable Comparison
For the Packaging & Containers subindustry, Mold-tek Packaging's Days Payable, along with its competitors' market caps and Days Payable data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mold-tek Packaging Days Payable vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Mold-tek Packaging's Days Payable distribution charts can be found below:
* The bar in red indicates where Mold-tek Packaging's Days Payable falls into.
Days Payable indicates the number of days that the account payable relative to cost of goods sold the company has. An increase of Days Payable may suggest that the company delays paying its suppliers.
Mold-tek Packaging's Days Payable for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Mold-tek Packaging (BOM:533080) has a Days Payable of 42.12 as of Jun. 2026. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Mold-tek Packaging and its competitors. This is 41% above median its historical median of 29.89. Over the past decade, Mold-tek Packaging's Days Payable has ranged from 26.41 to 47.85. According to the industry distribution chart, Mold-tek Packaging ranks #273 out of 383 companies in the Packaging & Containers industry, placing it in the top 71.3%.
Is Mold-tek Packaging's Days Payable too high?
Mold-tek Packaging's current Days Payable of 42.12 is 41% above median its 10-year median of 29.89. Over the past 10 years, this metric has ranged from a low of 26.41 to a high of 47.85. The Packaging & Containers industry median Days Payable is 57.27. Mold-tek Packaging's value of 42.12 is 26.5% below this industry median. Based on the distribution chart, Mold-tek Packaging ranks #273 out of 383 companies in the Packaging & Containers industry, which is below the industry midpoint. Overall, Mold-tek Packaging has a GF Score™ of 96/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Mold-tek Packaging's Days Payable compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Mold-tek Packaging ranks #273 out of 383 companies for Days Payable. This places Mold-tek Packaging in the lower half of its industry. The industry median Days Payable is 57.27. Mold-tek Packaging's value of 42.12 is 26.5% below this benchmark. Historically, Mold-tek Packaging's own Days Payable has ranged from 26.41 to 47.85 over the past decade. While the company's 10-year median is 29.89 vs. the industry median of 57.27, Mold-tek Packaging has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Days Payable for a Packaging & Containers company?
The median Days Payable among Packaging & Containers companies is 57.27, based on 383 companies in the industry. Companies in the top quartile (top 25%) have a Days Payable significantly above this median, while those in the bottom quartile fall well below. However, Days Payable should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mold-tek Packaging's current Days Payable of 42.12 is 26.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Days Payable mean?
A high Days Payable can signal that a stock is expensive relative to its fundamentals. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Mold-tek Packaging and its competitors. For the Packaging & Containers industry, the median Days Payable is 57.27 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mold-tek Packaging's current Days Payable is 42.12, which is 41% above median its own 10-year median of 29.89. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mold-tek Packaging stock overvalued right now?
Based on GuruFocus' analysis, Mold-tek Packaging (BOM:533080) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹905.94, compared to a current price of ₹656.90 — trading 27.5% below its estimated fair value. The current Days Payable is 42.12, which is 41% above median its 10-year median of 29.89 and 26.5% below the Packaging & Containers industry median of 57.27. Mold-tek Packaging's overall GF Score™ is 96/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Days Payable calculated?
Days Payable is calculated from a company's financial statements. For Mold-tek Packaging (BOM:533080), the current Days Payable is 42.12 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mold-tek Packaging (BOM:533080) Overvalued in 2026?
Based on GuruFocus' analysis, Mold-tek Packaging stock appears to be undervalued.
The current stock price of ₹656.90 is trading 27.5% below its estimated GF Value™ of ₹905.94.
GuruFocus considers Mold-tek Packaging to be Modestly Undervalued.
Key valuation signals for BOM:533080:
Days Payable: 42.12 (41% above median its 10-year median of 29.89)
GF Value™: ₹905.94 vs. price of ₹656.90 (27.5% below fair value)
Industry Position: 26.5% below the Packaging & Containers median (#273 of 383)
No single metric tells the full story. See the BOM:533080 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mold-tek Packaging Ltd is an Indian based company operating in the packaging container business segment. The company is engaged in the manufacturing of injection molded containers for lubes, paints, food and other products.
96GF Score
Get the complete analysis for BOM:533080
Days Payable is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:533080 has been successfully added to your 
