Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Fine Metal Technologies PCLBKK:FMT -1.10%51 Debt-to-EBITDA is 7.75 as of Jun. 2026, which is 175% above its 10-year median of 2.82. GuruFocus rates BKK:FMT with a GF Score™ of 51/100 and a GF Value™ of ฿29.37 (Significantly Undervalued). The stock has 6 warning signs investors should review. Among 2,348 Industrial Products companies, Fine Metal Technologies PCL ranks worse than 95.44% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Fine Metal Technologies PCL's Debt-to-EBITDA or its related term are showing as below:
BKK:FMT'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.19 Med: 2.82 Max: 110.29
Current: 17.44
During the past 13 years, the highest Debt-to-EBITDA Ratio of Fine Metal Technologies PCL was 110.29. The lowest was 1.19. And the median was 2.82.
BKK:FMT's Debt-to-EBITDA is ranked worse than 95.44% of 2348
companies
in the Industrial Products industry
Industry Median: 1.68
vs BKK:FMT: 17.44
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Fine Metal Technologies PCL Debt-to-EBITDA Related Terms
Fine Metal Technologies PCL Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:FMT vs CRS, ATI, MLI: Debt-to-EBITDA Comparison
For the Metal Fabrication subindustry, Fine Metal Technologies PCL's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Fine Metal Technologies PCL Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Fine Metal Technologies PCL's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Fine Metal Technologies PCL's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Fine Metal Technologies PCL (BKK:FMT) has a Debt-to-EBITDA of 7.75 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Fine Metal Technologies PCL. This is 175% above median its historical median of 2.82. Over the past decade, Fine Metal Technologies PCL's Debt-to-EBITDA has ranged from 1.19 to 110.29. According to the industry distribution chart, Fine Metal Technologies PCL ranks #2241 out of 2348 companies in the Industrial Products industry, placing it in the top 95.4%.
Is Fine Metal Technologies PCL's Debt-to-EBITDA too high?
Fine Metal Technologies PCL's current Debt-to-EBITDA of 7.75 is 175% above median its 10-year median of 2.82. Over the past 10 years, this metric has ranged from a low of 1.19 to a high of 110.29. The Industrial Products industry median Debt-to-EBITDA is 1.68. Fine Metal Technologies PCL's value of 7.75 is 361.3% above this industry median. Based on the distribution chart, Fine Metal Technologies PCL ranks #2241 out of 2348 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Fine Metal Technologies PCL has a GF Score™ of 51/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Fine Metal Technologies PCL's Debt-to-EBITDA compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Fine Metal Technologies PCL ranks #2241 out of 2348 companies for Debt-to-EBITDA. This places Fine Metal Technologies PCL in the lower half of its industry. The industry median Debt-to-EBITDA is 1.68. Fine Metal Technologies PCL's value of 7.75 is 361.3% above this benchmark. Historically, Fine Metal Technologies PCL's own Debt-to-EBITDA has ranged from 1.19 to 110.29 over the past decade. While the company's 10-year median is 2.82 vs. the industry median of 1.68, Fine Metal Technologies PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.68, based on 2,348 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Fine Metal Technologies PCL's current Debt-to-EBITDA of 7.75 is 361.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Fine Metal Technologies PCL. For the Industrial Products industry, the median Debt-to-EBITDA is 1.68 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Fine Metal Technologies PCL's current Debt-to-EBITDA is 7.75, which is 175% above median its own 10-year median of 2.82. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Fine Metal Technologies PCL stock overvalued right now?
Based on GuruFocus' analysis, Fine Metal Technologies PCL (BKK:FMT) is currently considered Significantly Undervalued. The stock's GF Value™ is ฿29.37, compared to a current price of ฿18.00 — trading 38.7% below its estimated fair value. The current Debt-to-EBITDA is 7.75, which is 175% above median its 10-year median of 2.82 and 361.3% above the Industrial Products industry median of 1.68. Fine Metal Technologies PCL's overall GF Score™ is 51/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Fine Metal Technologies PCL (BKK:FMT), the current Debt-to-EBITDA is 7.75 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Fine Metal Technologies PCL (BKK:FMT) Overvalued in 2026?
Based on GuruFocus' analysis, Fine Metal Technologies PCL stock appears to be undervalued.
The current stock price of ฿18.00 is trading 38.7% below its estimated GF Value™ of ฿29.37.
GuruFocus considers Fine Metal Technologies PCL to be Significantly Undervalued.
Key valuation signals for BKK:FMT:
Debt-to-EBITDA: 7.75 (175% above median its 10-year median of 2.82)
GF Value™: ฿29.37 vs. price of ฿18.00 (38.7% below fair value)
Industry Position: 361.3% above the Industrial Products median (#2241 of 2348)
No single metric tells the full story. See the BKK:FMT stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Fine Metal Technologies PCL is engaged in the manufacturing and distribution of a seamless copper tube, which is an important component for air-conditioners and refrigerator equipment. Its products include Smooth Tube, Multi Groove Tube, Accumulator Tube, and Capillary Tube. Geographically, the company operates in Thailand, Malaysia, Japan, and Other countries.
51GF Score
Get the complete analysis for BKK:FMT
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:FMT has been successfully added to your 
