Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
K.C. Metalsheet PCLBKK:KCM 36 Debt-to-EBITDA is 4.27 as of Mar. 2026, which is 23% below its 10-year median of 5.53. GuruFocus rates BKK:KCM with a GF Score™ of 36/100 and a GF Value™ of ฿0.21 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 2,357 Industrial Products companies, K.C. Metalsheet PCL ranks worse than 88.97% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for K.C. Metalsheet PCL's Debt-to-EBITDA or its related term are showing as below:
BKK:KCM'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 2.38 Med: 5.53 Max: 21.19
Current: 8.92
During the past 13 years, the highest Debt-to-EBITDA Ratio of K.C. Metalsheet PCL was 21.19. The lowest was 2.38. And the median was 5.53.
BKK:KCM's Debt-to-EBITDA is ranked worse than 88.97% of 2357
companies
in the Industrial Products industry
Industry Median: 1.69
vs BKK:KCM: 8.92
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
K.C. Metalsheet PCL Debt-to-EBITDA Related Terms
K.C. Metalsheet PCL Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for K.C. Metalsheet PCL's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:KCM vs CRS, ATI, MLI: Debt-to-EBITDA Comparison
For the Metal Fabrication subindustry, K.C. Metalsheet PCL's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
K.C. Metalsheet PCL Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, K.C. Metalsheet PCL's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where K.C. Metalsheet PCL's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
K.C. Metalsheet PCL (BKK:KCM) has a Debt-to-EBITDA of 4.27 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on K.C. Metalsheet PCL. This is 23% below median its historical median of 5.53. Over the past decade, K.C. Metalsheet PCL's Debt-to-EBITDA has ranged from 2.38 to 21.19. According to the industry distribution chart, K.C. Metalsheet PCL ranks #2097 out of 2357 companies in the Industrial Products industry, placing it in the top 89%.
Is K.C. Metalsheet PCL's Debt-to-EBITDA too high?
K.C. Metalsheet PCL's current Debt-to-EBITDA of 4.27 is 23% below median its 10-year median of 5.53. Over the past 10 years, this metric has ranged from a low of 2.38 to a high of 21.19. The Industrial Products industry median Debt-to-EBITDA is 1.69. K.C. Metalsheet PCL's value of 4.27 is 152.7% above this industry median. Based on the distribution chart, K.C. Metalsheet PCL ranks #2097 out of 2357 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, K.C. Metalsheet PCL has a GF Score™ of 36/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does K.C. Metalsheet PCL's Debt-to-EBITDA compare to CRS and ATI?
According to the Industrial Products industry distribution chart, K.C. Metalsheet PCL ranks #2097 out of 2357 companies for Debt-to-EBITDA. This places K.C. Metalsheet PCL in the lower half of its industry. The industry median Debt-to-EBITDA is 1.69. K.C. Metalsheet PCL's value of 4.27 is 152.7% above this benchmark. Historically, K.C. Metalsheet PCL's own Debt-to-EBITDA has ranged from 2.38 to 21.19 over the past decade. While the company's 10-year median is 5.53 vs. the industry median of 1.69, K.C. Metalsheet PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.69, based on 2,357 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. K.C. Metalsheet PCL's current Debt-to-EBITDA of 4.27 is 152.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on K.C. Metalsheet PCL. For the Industrial Products industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. K.C. Metalsheet PCL's current Debt-to-EBITDA is 4.27, which is 23% below median its own 10-year median of 5.53. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is K.C. Metalsheet PCL stock overvalued right now?
Based on GuruFocus' analysis, K.C. Metalsheet PCL (BKK:KCM) is currently considered Significantly Overvalued. The stock's GF Value™ is ฿0.21, compared to a current price of ฿0.30 — trading 42.9% above its estimated fair value. The current Debt-to-EBITDA is 4.27, which is 23% below median its 10-year median of 5.53 and 152.7% above the Industrial Products industry median of 1.69. K.C. Metalsheet PCL's overall GF Score™ is 36/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For K.C. Metalsheet PCL (BKK:KCM), the current Debt-to-EBITDA is 4.27 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is K.C. Metalsheet PCL (BKK:KCM) Overvalued in 2026?
Based on GuruFocus' analysis, K.C. Metalsheet PCL stock appears to be overvalued.
The current stock price of ฿0.30 is trading 42.9% above its estimated GF Value™ of ฿0.21.
GuruFocus considers K.C. Metalsheet PCL to be Significantly Overvalued.
Key valuation signals for BKK:KCM:
Debt-to-EBITDA: 4.27 (23% below median its 10-year median of 5.53)
GF Value™: ฿0.21 vs. price of ฿0.30 (42.9% above fair value)
Industry Position: 152.7% above the Industrial Products median (#2097 of 2357)
No single metric tells the full story. See the BKK:KCM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
K.C. Metalsheet PCL is engaged in the manufacture and distribution of metal sheets for roofing and various other metal sheets. The company includes segments: Sales: Manufacturer and distributor of metal sheets, Contract work: Sales of manufactured goods under contract with the customers, and construction service, Services income: Roof installation services with metal sheets and various steel goods, and Rental income: Property rental service. The majority of the company's revenue is from the Sales Segment. The Group operates in a domestic.
36GF Score
Get the complete analysis for BKK:KCM
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:KCM has been successfully added to your 
