Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Unique Plastic Industry PCLBKK:UNIX +1.60%10 Debt-to-EBITDA is 3.98 as of Dec. 2025, which is 5% below its 10-year median of 4.20. GuruFocus rates BKK:UNIX with a GF Score™ of 10/100. The stock has 5 warning signs investors should review. Among 340 Packaging & Containers companies, Unique Plastic Industry PCL ranks worse than 69.12% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Unique Plastic Industry PCL's Debt-to-EBITDA or its related term are showing as below:
BKK:UNIX'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 3.98 Med: 4.2 Max: 4.41
Current: 3.98
During the past 2 years, the highest Debt-to-EBITDA Ratio of Unique Plastic Industry PCL was 4.41. The lowest was 3.98. And the median was 4.20.
BKK:UNIX's Debt-to-EBITDA is ranked worse than 69.12% of 340
companies
in the Packaging & Containers industry
Industry Median: 2.515
vs BKK:UNIX: 3.98
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Unique Plastic Industry PCL Debt-to-EBITDA Related Terms
Unique Plastic Industry PCL Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Unique Plastic Industry PCL Debt-to-EBITDA Chart
Unique Plastic Industry PCL Annual Data
Trend
Dec24
Dec25
Debt-to-EBITDA
4.41
3.98
Unique Plastic Industry PCL Semi-Annual Data
Dec24
Dec25
Debt-to-EBITDA
4.41
3.98
BKK:UNIX vs SW, PKG, IP: Debt-to-EBITDA Comparison
For the Packaging & Containers subindustry, Unique Plastic Industry PCL's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Unique Plastic Industry PCL Debt-to-EBITDA vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Unique Plastic Industry PCL's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Unique Plastic Industry PCL's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is one times the quarterly (Dec. 2025) EBITDA data.
Unique Plastic Industry PCL (BKK:UNIX) has a Debt-to-EBITDA of 3.98 as of Dec. 2025. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Unique Plastic Industry PCL. This is near median its historical median of 4.20. Over the past decade, Unique Plastic Industry PCL's Debt-to-EBITDA has ranged from 3.98 to 4.41. According to the industry distribution chart, Unique Plastic Industry PCL ranks #235 out of 340 companies in the Packaging & Containers industry, placing it in the top 69.1%.
Is Unique Plastic Industry PCL's Debt-to-EBITDA too high?
Unique Plastic Industry PCL's current Debt-to-EBITDA of 3.98 is near median its 10-year median of 4.20. Over the past 10 years, this metric has ranged from a low of 3.98 to a high of 4.41. The Packaging & Containers industry median Debt-to-EBITDA is 2.52. Unique Plastic Industry PCL's value of 3.98 is 58.3% above this industry median. Based on the distribution chart, Unique Plastic Industry PCL ranks #235 out of 340 companies in the Packaging & Containers industry, which is below the industry midpoint. Overall, Unique Plastic Industry PCL has a GF Score™ of 10/100, reflecting its overall financial health beyond just this single metric.
How does Unique Plastic Industry PCL's Debt-to-EBITDA compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Unique Plastic Industry PCL ranks #235 out of 340 companies for Debt-to-EBITDA. This places Unique Plastic Industry PCL in the lower half of its industry. The industry median Debt-to-EBITDA is 2.52. Unique Plastic Industry PCL's value of 3.98 is 58.3% above this benchmark. Historically, Unique Plastic Industry PCL's own Debt-to-EBITDA has ranged from 3.98 to 4.41 over the past decade. While the company's 10-year median is 4.20 vs. the industry median of 2.52, Unique Plastic Industry PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Packaging & Containers company?
The median Debt-to-EBITDA among Packaging & Containers companies is 2.52, based on 340 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Unique Plastic Industry PCL's current Debt-to-EBITDA of 3.98 is 58.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Unique Plastic Industry PCL. For the Packaging & Containers industry, the median Debt-to-EBITDA is 2.52 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Unique Plastic Industry PCL's current Debt-to-EBITDA is 3.98, which is near median its own 10-year median of 4.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Unique Plastic Industry PCL stock overvalued right now?
Unique Plastic Industry PCL (BKK:UNIX) has a current Debt-to-EBITDA of 3.98. The current Debt-to-EBITDA is 3.98, which is near median its 10-year median of 4.20 and 58.3% above the Packaging & Containers industry median of 2.52. Unique Plastic Industry PCL's overall GF Score™ is 10/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Unique Plastic Industry PCL (BKK:UNIX), the current Debt-to-EBITDA is 3.98 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Unique Plastic Industry PCL operates in the plastic film and packaging industry. The company is engaged in the business operations of the Group are manufacturing and trading film and bags for the consumer sector, film for flexible packaging and bags for the industrial sector, heavy-duty usage film and bags for the industrial sector, and general film and bags for the industrial sector. The Group is principally engaged in four operating segments: Film and bags for the consumer sector; Film for flexible packaging and bags for the industrial sector; Heavy-duty usage film and bags for the industrial sector; and General film and bags for the industrial sector. Its product portfolio includes: Film for Flexible Packaging; Film and Packaging for Heavy Duty Sack, & Film & Packaging for Industrial.
10GF Score
Get the complete analysis for BKK:UNIX
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:UNIX has been successfully added to your 
