Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
ScanfilFRA:S0A +0.83%89 Debt-to-EBITDA is 1.66 as of Jun. 2026, which is 41% above its 10-year median of 1.18. GuruFocus rates FRA:S0A with a GF Score™ of 89/100 and a GF Value™ of €9.95 (Modestly Overvalued). The stock has 7 warning signs investors should review. Among 2,310 Industrial Products companies, Scanfil ranks worse than 53.12% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Scanfil's Debt-to-EBITDA or its related term are showing as below:
FRA:S0A'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.75 Med: 1.18 Max: 3.22
Current: 1.9
During the past 13 years, the highest Debt-to-EBITDA Ratio of Scanfil was 3.22. The lowest was 0.75. And the median was 1.18.
FRA:S0A's Debt-to-EBITDA is ranked worse than 53.12% of 2310
companies
in the Industrial Products industry
Industry Median: 1.69
vs FRA:S0A: 1.90
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Scanfil Debt-to-EBITDA Related Terms
Scanfil Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Scanfil's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
FRA:S0A vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Scanfil's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Scanfil Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Scanfil's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Scanfil's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Scanfil (FRA:S0A) has a Debt-to-EBITDA of 1.66 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Scanfil. This is 41% above median its historical median of 1.18. Over the past decade, Scanfil's Debt-to-EBITDA has ranged from 0.75 to 3.22. According to the industry distribution chart, Scanfil ranks #1227 out of 2310 companies in the Industrial Products industry, placing it in the top 53.1%.
Is Scanfil's Debt-to-EBITDA too high?
Scanfil's current Debt-to-EBITDA of 1.66 is 41% above median its 10-year median of 1.18. Over the past 10 years, this metric has ranged from a low of 0.75 to a high of 3.22. The Industrial Products industry median Debt-to-EBITDA is 1.69. Scanfil's value of 1.66 is 1.8% below this industry median. Based on the distribution chart, Scanfil ranks #1227 out of 2310 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Scanfil has a GF Score™ of 89/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Scanfil's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Scanfil ranks #1227 out of 2310 companies for Debt-to-EBITDA. This places Scanfil in the lower half of its industry. The industry median Debt-to-EBITDA is 1.69. Scanfil's value of 1.66 is 1.8% below this benchmark. Historically, Scanfil's own Debt-to-EBITDA has ranged from 0.75 to 3.22 over the past decade. While the company's 10-year median is 1.18 vs. the industry median of 1.69, Scanfil has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.69, based on 2,310 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Scanfil's current Debt-to-EBITDA of 1.66 is 1.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Scanfil. For the Industrial Products industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Scanfil's current Debt-to-EBITDA is 1.66, which is 41% above median its own 10-year median of 1.18. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Scanfil stock overvalued right now?
Based on GuruFocus' analysis, Scanfil (FRA:S0A) is currently considered Modestly Overvalued. The stock's GF Value™ is €9.95, compared to a current price of €12.12 — trading 21.8% above its estimated fair value. The current Debt-to-EBITDA is 1.66, which is 41% above median its 10-year median of 1.18 and 1.8% below the Industrial Products industry median of 1.69. Scanfil's overall GF Score™ is 89/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Scanfil (FRA:S0A), the current Debt-to-EBITDA is 1.66 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Scanfil (FRA:S0A) Overvalued in 2026?
Based on GuruFocus' analysis, Scanfil stock appears to be overvalued.
The current stock price of €12.12 is trading 21.8% above its estimated GF Value™ of €9.95.
GuruFocus considers Scanfil to be Modestly Overvalued.
Key valuation signals for FRA:S0A:
Debt-to-EBITDA: 1.66 (41% above median its 10-year median of 1.18)
GF Value™: €9.95 vs. price of €12.12 (21.8% above fair value)
Industry Position: 1.8% below the Industrial Products median (#1227 of 2310)
No single metric tells the full story. See the FRA:S0A stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Scanfil PLC is an international contract manufacturer and system supplier for the electronics industry, providing services ranging from product design to manufacturing, material procurement, and logistics solutions. The Company's services include design services, prototype manufacturing, design for manufacturability (DFM), test development, supply chain and logistics services, circuit board assembly, manufacturing of subsystems and components, and complex systems integration. It serves the sector across Aerospace & Defense, Energy & Cleantech, Industrial, and Medtech & Life Science. The Company operates in the Americas, APAC, Central Europe, and Northern Europe, with Central Europe generating the majority of revenue.
89GF Score
Get the complete analysis for FRA:S0A
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:S0A has been successfully added to your 
