Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Euro Group Laminations SpAMIL:EGLA +4.21%61 Debt-to-EBITDA is 0.64 as of Mar. 2026, which is 85% below its 10-year median of 4.41. GuruFocus rates MIL:EGLA with a GF Score™ of 61/100 and a GF Value™ of €3.34 (Possible Value Trap). The stock has 9 warning signs investors should review. Among 1,100 Vehicles & Parts companies, Euro Group Laminations SpA ranks better than 81.36% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Euro Group Laminations SpA's Debt-to-EBITDA or its related term are showing as below:
MIL:EGLA'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.53 Med: 4.41 Max: 12.46
Current: 0.53
During the past 7 years, the highest Debt-to-EBITDA Ratio of Euro Group Laminations SpA was 12.46. The lowest was 0.53. And the median was 4.41.
MIL:EGLA's Debt-to-EBITDA is ranked better than 81.36% of 1100
companies
in the Vehicles & Parts industry
Industry Median: 2.26
vs MIL:EGLA: 0.53
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Euro Group Laminations SpA Debt-to-EBITDA Related Terms
Euro Group Laminations SpA Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
MIL:EGLA vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Auto Parts subindustry, Euro Group Laminations SpA's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Euro Group Laminations SpA Debt-to-EBITDA vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Euro Group Laminations SpA's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Euro Group Laminations SpA's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Euro Group Laminations SpA (MIL:EGLA) has a Debt-to-EBITDA of 0.64 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Euro Group Laminations SpA. This is 85% below median its historical median of 4.41. Over the past decade, Euro Group Laminations SpA's Debt-to-EBITDA has ranged from 0.53 to 12.46. According to the industry distribution chart, Euro Group Laminations SpA ranks #205 out of 1100 companies in the Vehicles & Parts industry, placing it in the top 18.6%.
Is Euro Group Laminations SpA's Debt-to-EBITDA too high?
Euro Group Laminations SpA's current Debt-to-EBITDA of 0.64 is 85% below median its 10-year median of 4.41. Over the past 10 years, this metric has ranged from a low of 0.53 to a high of 12.46. The Vehicles & Parts industry median Debt-to-EBITDA is 2.26. Euro Group Laminations SpA's value of 0.64 is 71.7% below this industry median. Based on the distribution chart, Euro Group Laminations SpA ranks #205 out of 1100 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, Euro Group Laminations SpA has a GF Score™ of 61/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Euro Group Laminations SpA's Debt-to-EBITDA compare to GEV and ETN?
According to the Vehicles & Parts industry distribution chart, Euro Group Laminations SpA ranks #205 out of 1100 companies for Debt-to-EBITDA. This places Euro Group Laminations SpA in the top 19% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 2.26. Euro Group Laminations SpA's value of 0.64 is 71.7% below this benchmark. Historically, Euro Group Laminations SpA's own Debt-to-EBITDA has ranged from 0.53 to 12.46 over the past decade. While the company's 10-year median is 4.41 vs. the industry median of 2.26, Euro Group Laminations SpA has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Vehicles & Parts company?
The median Debt-to-EBITDA among Vehicles & Parts companies is 2.26, based on 1,100 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Euro Group Laminations SpA's current Debt-to-EBITDA of 0.64 is 71.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Euro Group Laminations SpA. For the Vehicles & Parts industry, the median Debt-to-EBITDA is 2.26 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Euro Group Laminations SpA's current Debt-to-EBITDA is 0.64, which is 85% below median its own 10-year median of 4.41. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Euro Group Laminations SpA stock overvalued right now?
Based on GuruFocus' analysis, Euro Group Laminations SpA (MIL:EGLA) is currently considered Possible Value Trap. The stock's GF Value™ is €3.34, compared to a current price of €1.07 — trading 68.1% below its estimated fair value. The current Debt-to-EBITDA is 0.64, which is 85% below median its 10-year median of 4.41 and 71.7% below the Vehicles & Parts industry median of 2.26. Euro Group Laminations SpA's overall GF Score™ is 61/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Euro Group Laminations SpA (MIL:EGLA), the current Debt-to-EBITDA is 0.64 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Euro Group Laminations SpA (MIL:EGLA) Overvalued in 2026?
Based on GuruFocus' analysis, Euro Group Laminations SpA stock appears to be undervalued.
The current stock price of €1.07 is trading 68.1% below its estimated GF Value™ of €3.34.
GuruFocus considers Euro Group Laminations SpA to be Possible Value Trap.
Key valuation signals for MIL:EGLA:
Debt-to-EBITDA: 0.64 (85% below median its 10-year median of 4.41)
GF Value™: €3.34 vs. price of €1.07 (68.1% below fair value)
Industry Position: 71.7% below the Vehicles & Parts median (#205 of 1100)
No single metric tells the full story. See the MIL:EGLA stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Euro Group Laminations SpA develops and produces stators and rotors for rotating electrical machines and large electric motors. The group is organized into two operating segments: E-mobility solutions and Industrial & Infrastructure solutions. The company generates the majority of its revenue from the E-mobility solutions segment. E-mobility solutions operate mainly in the electric automotive sector and in general in all applications related to the automotive sector. Industrial & Infrastructure solutions produces components mainly for the following product lines: home, logistics, energy, pumps, HVAC, tools, and diversified industrial.
61GF Score
Get the complete analysis for MIL:EGLA
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MIL:EGLA has been successfully added to your 
