Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Ideal Technoplast IndustriesNSE:IDEALTECHO +3.56%42 Debt-to-EBITDA is 3.42 as of Mar. 2026, which is 6% below its 10-year median of 3.65. GuruFocus rates NSE:IDEALTECHO with a GF Score™ of 42/100. The stock has 9 warning signs investors should review. Among 338 Packaging & Containers companies, Ideal Technoplast Industries ranks worse than 85.5% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Ideal Technoplast Industries's Debt-to-EBITDA or its related term are showing as below:
NSE:IDEALTECHO'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.06 Med: 3.65 Max: 6.83
Current: 6.83
During the past 6 years, the highest Debt-to-EBITDA Ratio of Ideal Technoplast Industries was 6.83. The lowest was 1.06. And the median was 3.65.
NSE:IDEALTECHO's Debt-to-EBITDA is ranked worse than 85.5% of 338
companies
in the Packaging & Containers industry
Industry Median: 2.545
vs NSE:IDEALTECHO: 6.83
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Ideal Technoplast Industries Debt-to-EBITDA Related Terms
Ideal Technoplast Industries Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:IDEALTECHO vs SW, PKG, IP: Debt-to-EBITDA Comparison
For the Packaging & Containers subindustry, Ideal Technoplast Industries's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ideal Technoplast Industries Debt-to-EBITDA vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Ideal Technoplast Industries's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Ideal Technoplast Industries's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is two times the quarterly (Mar. 2026) EBITDA data.
Ideal Technoplast Industries (NSE:IDEALTECHO) has a Debt-to-EBITDA of 3.42 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Ideal Technoplast Industries. This is near median its historical median of 3.65. Over the past decade, Ideal Technoplast Industries' Debt-to-EBITDA has ranged from 1.06 to 6.83. According to the industry distribution chart, Ideal Technoplast Industries ranks #289 out of 338 companies in the Packaging & Containers industry, placing it in the top 85.5%.
Is Ideal Technoplast Industries' Debt-to-EBITDA too high?
Ideal Technoplast Industries' current Debt-to-EBITDA of 3.42 is near median its 10-year median of 3.65. Over the past 10 years, this metric has ranged from a low of 1.06 to a high of 6.83. The Packaging & Containers industry median Debt-to-EBITDA is 2.55. Ideal Technoplast Industries' value of 3.42 is 34.4% above this industry median. Based on the distribution chart, Ideal Technoplast Industries ranks #289 out of 338 companies in the Packaging & Containers industry, which is in the bottom quartile relative to peers. Overall, Ideal Technoplast Industries has a GF Score™ of 42/100, reflecting its overall financial health beyond just this single metric.
How does Ideal Technoplast Industries' Debt-to-EBITDA compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Ideal Technoplast Industries ranks #289 out of 338 companies for Debt-to-EBITDA. This places Ideal Technoplast Industries in the lower half of its industry. The industry median Debt-to-EBITDA is 2.55. Ideal Technoplast Industries' value of 3.42 is 34.4% above this benchmark. Historically, Ideal Technoplast Industries' own Debt-to-EBITDA has ranged from 1.06 to 6.83 over the past decade. While the company's 10-year median is 3.65 vs. the industry median of 2.55, Ideal Technoplast Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Packaging & Containers company?
The median Debt-to-EBITDA among Packaging & Containers companies is 2.55, based on 338 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ideal Technoplast Industries's current Debt-to-EBITDA of 3.42 is 34.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Ideal Technoplast Industries. For the Packaging & Containers industry, the median Debt-to-EBITDA is 2.55 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ideal Technoplast Industries's current Debt-to-EBITDA is 3.42, which is near median its own 10-year median of 3.65. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ideal Technoplast Industries stock overvalued right now?
Ideal Technoplast Industries (NSE:IDEALTECHO) has a current Debt-to-EBITDA of 3.42. The current Debt-to-EBITDA is 3.42, which is near median its 10-year median of 3.65 and 34.4% above the Packaging & Containers industry median of 2.55. Ideal Technoplast Industries' overall GF Score™ is 42/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Ideal Technoplast Industries (NSE:IDEALTECHO), the current Debt-to-EBITDA is 3.42 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Ideal Technoplast Industries Ltd is a manufacturer and supplier of rigid plastic packaging, with a presence in both domestic and international markets (indirectly through export houses and third parties. It provides industrial packaging solutions i.e., Industrial containers, adhesives, lubes, oil, etc. The company operates within the international and domestic rigid plastic packaging industry - an essential segment underpinning multiple end-markets, including food & beverage, chemicals, lubricants, and fast-moving consumer goods (FMCG).
42GF Score
Get the complete analysis for NSE:IDEALTECHO
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:IDEALTECHO has been successfully added to your 
