Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Maharashtra Seamless's Debt-to-EBITDA or its related term are showing as below:
NSE:MAHSEAMLES'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.01 Med: 1.77 Max: 3.7
Current: 0.01
During the past 13 years, the highest Debt-to-EBITDA Ratio of Maharashtra Seamless was 3.70. The lowest was 0.01. And the median was 1.77.
NSE:MAHSEAMLES's Debt-to-EBITDA is ranked better than 99.8% of 498
companies
in the Steel industry
Industry Median: 2.82
vs NSE:MAHSEAMLES: 0.01
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Maharashtra Seamless Debt-to-EBITDA Related Terms
Maharashtra Seamless Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Maharashtra Seamless's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MAHSEAMLES vs NUE, STLD, RS: Debt-to-EBITDA Comparison
For the Steel subindustry, Maharashtra Seamless's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Maharashtra Seamless Debt-to-EBITDA vs Steel Industry
For the Steel industry and Basic Materials sector, Maharashtra Seamless's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Maharashtra Seamless's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Maharashtra Seamless (NSE:MAHSEAMLES) has a Debt-to-EBITDA of 0.00 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Maharashtra Seamless. Over the past decade, Maharashtra Seamless' Debt-to-EBITDA has ranged from 0.01 to 3.70. According to the industry distribution chart, Maharashtra Seamless ranks #1 out of 498 companies in the Steel industry, placing it in the top 0.2%.
Is Maharashtra Seamless' Debt-to-EBITDA too high?
Maharashtra Seamless' current Debt-to-EBITDA is 0.00. Over the past 10 years, this metric has ranged from a low of 0.01 to a high of 3.70. Based on the distribution chart, Maharashtra Seamless ranks #1 out of 498 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Maharashtra Seamless has a GF Score™ of 79/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Maharashtra Seamless' Debt-to-EBITDA compare to NUE and STLD?
According to the Steel industry distribution chart, Maharashtra Seamless ranks #1 out of 498 companies for Debt-to-EBITDA. This places Maharashtra Seamless in the top 0% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 2.82. Historically, Maharashtra Seamless' own Debt-to-EBITDA has ranged from 0.01 to 3.70 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Steel company?
The median Debt-to-EBITDA among Steel companies is 2.82, based on 498 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Maharashtra Seamless. For the Steel industry, the median Debt-to-EBITDA is 2.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Maharashtra Seamless's current Debt-to-EBITDA is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Maharashtra Seamless stock overvalued right now?
Based on GuruFocus' analysis, Maharashtra Seamless (NSE:MAHSEAMLES) is currently considered Fairly Valued. The stock's GF Value™ is ₹640.31, compared to a current price of ₹688.10 — trading 7.5% above its estimated fair value. The current Debt-to-EBITDA is 0.00. Maharashtra Seamless' overall GF Score™ is 79/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Maharashtra Seamless (NSE:MAHSEAMLES), the current Debt-to-EBITDA is 0.00 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Maharashtra Seamless (NSE:MAHSEAMLES) Overvalued in 2026?
Based on GuruFocus' analysis, Maharashtra Seamless stock appears to be overvalued.
The current stock price of ₹688.10 is trading 7.5% above its estimated GF Value™ of ₹640.31.
GuruFocus considers Maharashtra Seamless to be Fairly Valued.
Key valuation signals for NSE:MAHSEAMLES:
Debt-to-EBITDA: 0.00
GF Value™: ₹640.31 vs. price of ₹688.10 (7.5% above fair value)
No single metric tells the full story. See the NSE:MAHSEAMLES stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Maharashtra Seamless Ltd is a steel pipe and tube manufacturer. The company's product portfolio consists of electric resistance welded pipes, which include black and galvanized pipes, and seamless pipes and tubes, which include hot finished, cold drawn, and pilgered pipes. These products are used in various applications and sectors like oil and gas, hydrocarbon, power, agriculture, housing, and infrastructure, among others. The company's operating segments consist of steel pipes and tubes, power-electricity, rig, and others. The majority of its revenue is derived from the steel pipes and tubes segment.
79GF Score
Get the complete analysis for NSE:MAHSEAMLES
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MAHSEAMLES has been successfully added to your 
