Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Pattech Fitwell Tube Components's Debt-to-EBITDA or its related term are showing as below:
NSE:PATTECH'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 3.77 Med: 6.69 Max: 11.06
Current: 6.69
During the past 7 years, the highest Debt-to-EBITDA Ratio of Pattech Fitwell Tube Components was 11.06. The lowest was 3.77. And the median was 6.69.
NSE:PATTECH's Debt-to-EBITDA is ranked worse than 76.97% of 495
companies
in the Steel industry
Industry Median: 2.92
vs NSE:PATTECH: 6.69
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Pattech Fitwell Tube Components Debt-to-EBITDA Related Terms
Pattech Fitwell Tube Components Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:PATTECH vs NUE, STLD, RS: Debt-to-EBITDA Comparison
For the Steel subindustry, Pattech Fitwell Tube Components's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Pattech Fitwell Tube Components Debt-to-EBITDA vs Steel Industry
For the Steel industry and Basic Materials sector, Pattech Fitwell Tube Components's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Pattech Fitwell Tube Components's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is two times the quarterly (Mar. 2026) EBITDA data.
Pattech Fitwell Tube Components (NSE:PATTECH) has a Debt-to-EBITDA of 6.08 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Pattech Fitwell Tube Components. This is near median its historical median of 6.69. Over the past decade, Pattech Fitwell Tube Components' Debt-to-EBITDA has ranged from 3.77 to 11.06. According to the industry distribution chart, Pattech Fitwell Tube Components ranks #381 out of 495 companies in the Steel industry, placing it in the top 77%.
Is Pattech Fitwell Tube Components' Debt-to-EBITDA too high?
Pattech Fitwell Tube Components' current Debt-to-EBITDA of 6.08 is near median its 10-year median of 6.69. Over the past 10 years, this metric has ranged from a low of 3.77 to a high of 11.06. The Steel industry median Debt-to-EBITDA is 2.92. Pattech Fitwell Tube Components' value of 6.08 is 108.2% above this industry median. Based on the distribution chart, Pattech Fitwell Tube Components ranks #381 out of 495 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Pattech Fitwell Tube Components has a GF Score™ of 86/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Pattech Fitwell Tube Components' Debt-to-EBITDA compare to NUE and STLD?
According to the Steel industry distribution chart, Pattech Fitwell Tube Components ranks #381 out of 495 companies for Debt-to-EBITDA. This places Pattech Fitwell Tube Components in the lower half of its industry. The industry median Debt-to-EBITDA is 2.92. Pattech Fitwell Tube Components' value of 6.08 is 108.2% above this benchmark. Historically, Pattech Fitwell Tube Components' own Debt-to-EBITDA has ranged from 3.77 to 11.06 over the past decade. While the company's 10-year median is 6.69 vs. the industry median of 2.92, Pattech Fitwell Tube Components has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Steel company?
The median Debt-to-EBITDA among Steel companies is 2.92, based on 495 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Pattech Fitwell Tube Components's current Debt-to-EBITDA of 6.08 is 108.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Pattech Fitwell Tube Components. For the Steel industry, the median Debt-to-EBITDA is 2.92 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Pattech Fitwell Tube Components's current Debt-to-EBITDA is 6.08, which is near median its own 10-year median of 6.69. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Pattech Fitwell Tube Components stock overvalued right now?
Based on GuruFocus' analysis, Pattech Fitwell Tube Components (NSE:PATTECH) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹127.70, compared to a current price of ₹114.85 — trading 10.1% below its estimated fair value. The current Debt-to-EBITDA is 6.08, which is near median its 10-year median of 6.69 and 108.2% above the Steel industry median of 2.92. Pattech Fitwell Tube Components' overall GF Score™ is 86/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Pattech Fitwell Tube Components (NSE:PATTECH), the current Debt-to-EBITDA is 6.08 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Pattech Fitwell Tube Components (NSE:PATTECH) Overvalued in 2026?
Based on GuruFocus' analysis, Pattech Fitwell Tube Components stock appears to be undervalued.
The current stock price of ₹114.85 is trading 10.1% below its estimated GF Value™ of ₹127.70.
GuruFocus considers Pattech Fitwell Tube Components to be Modestly Undervalued.
Key valuation signals for NSE:PATTECH:
Debt-to-EBITDA: 6.08 (near median its 10-year median of 6.69)
GF Value™: ₹127.70 vs. price of ₹114.85 (10.1% below fair value)
Industry Position: 108.2% above the Steel median (#381 of 495)
No single metric tells the full story. See the NSE:PATTECH stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Pattech Fitwell Tube Components Ltd is engaged in manufacturing pipe fittings, flanges, and various types of forgings and machined components, as well as pipe spools and fabrication works for various industries like fertilizers, petrochemical, power, chemical and pharmaceutical, food processing, oil and gas, desalination and water treatment, shipbuilding, defense, fabrication of process equipment, and instrumentation.
86GF Score
Get the complete analysis for NSE:PATTECH
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:PATTECH has been successfully added to your 
