Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Salasar Techno Engineering's Debt-to-EBITDA or its related term are showing as below:
NSE:SALASAR'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.79 Med: 2.99 Max: 3.65
Current: 3.48
During the past 13 years, the highest Debt-to-EBITDA Ratio of Salasar Techno Engineering was 3.65. The lowest was 1.79. And the median was 2.99.
NSE:SALASAR's Debt-to-EBITDA is ranked worse than 56.16% of 495
companies
in the Steel industry
Industry Median: 2.92
vs NSE:SALASAR: 3.48
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Salasar Techno Engineering Debt-to-EBITDA Related Terms
Salasar Techno Engineering Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:SALASAR vs NUE, STLD, RS: Debt-to-EBITDA Comparison
For the Steel subindustry, Salasar Techno Engineering's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Salasar Techno Engineering Debt-to-EBITDA vs Steel Industry
For the Steel industry and Basic Materials sector, Salasar Techno Engineering's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Salasar Techno Engineering's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Salasar Techno Engineering (NSE:SALASAR) has a Debt-to-EBITDA of 6.01 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Salasar Techno Engineering. This is 101% above median its historical median of 2.99. Over the past decade, Salasar Techno Engineering's Debt-to-EBITDA has ranged from 1.79 to 3.65. According to the industry distribution chart, Salasar Techno Engineering ranks #278 out of 495 companies in the Steel industry, placing it in the top 56.2%.
Is Salasar Techno Engineering's Debt-to-EBITDA too high?
Salasar Techno Engineering's current Debt-to-EBITDA of 6.01 is 101% above median its 10-year median of 2.99. Over the past 10 years, this metric has ranged from a low of 1.79 to a high of 3.65. The Steel industry median Debt-to-EBITDA is 2.92. Salasar Techno Engineering's value of 6.01 is 105.8% above this industry median. Based on the distribution chart, Salasar Techno Engineering ranks #278 out of 495 companies in the Steel industry, which is below the industry midpoint. Overall, Salasar Techno Engineering has a GF Score™ of 80/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Salasar Techno Engineering's Debt-to-EBITDA compare to NUE and STLD?
According to the Steel industry distribution chart, Salasar Techno Engineering ranks #278 out of 495 companies for Debt-to-EBITDA. This places Salasar Techno Engineering in the lower half of its industry. The industry median Debt-to-EBITDA is 2.92. Salasar Techno Engineering's value of 6.01 is 105.8% above this benchmark. Historically, Salasar Techno Engineering's own Debt-to-EBITDA has ranged from 1.79 to 3.65 over the past decade. While the company's 10-year median is 2.99 vs. the industry median of 2.92, Salasar Techno Engineering has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Steel company?
The median Debt-to-EBITDA among Steel companies is 2.92, based on 495 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Salasar Techno Engineering's current Debt-to-EBITDA of 6.01 is 105.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Salasar Techno Engineering. For the Steel industry, the median Debt-to-EBITDA is 2.92 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Salasar Techno Engineering's current Debt-to-EBITDA is 6.01, which is 101% above median its own 10-year median of 2.99. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Salasar Techno Engineering stock overvalued right now?
Based on GuruFocus' analysis, Salasar Techno Engineering (NSE:SALASAR) is currently considered Possible Value Trap. The stock's GF Value™ is ₹14.42, compared to a current price of ₹6.07 — trading 57.9% below its estimated fair value. The current Debt-to-EBITDA is 6.01, which is 101% above median its 10-year median of 2.99 and 105.8% above the Steel industry median of 2.92. Salasar Techno Engineering's overall GF Score™ is 80/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Salasar Techno Engineering (NSE:SALASAR), the current Debt-to-EBITDA is 6.01 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Salasar Techno Engineering (NSE:SALASAR) Overvalued in 2026?
Based on GuruFocus' analysis, Salasar Techno Engineering stock appears to be undervalued.
The current stock price of ₹6.07 is trading 57.9% below its estimated GF Value™ of ₹14.42.
GuruFocus considers Salasar Techno Engineering to be Possible Value Trap.
Key valuation signals for NSE:SALASAR:
Debt-to-EBITDA: 6.01 (101% above median its 10-year median of 2.99)
GF Value™: ₹14.42 vs. price of ₹6.07 (57.9% below fair value)
Industry Position: 105.8% above the Steel median (#278 of 495)
No single metric tells the full story. See the NSE:SALASAR stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Salasar Techno Engineering Ltd is engaged in the business of manufacturing and sale of Galvanized Steel Structure including Telecom Towers, Transmission Line Towers and Solar Panels. The Company is also engaged in execution of Engineering, Procurement and Construction projects (EPC) for survey, supply of materials, design, erection, testing & commissioning on a turnkey basis. The Business is divided in two segments i.e. Steel Structure segment and Engineering procurement & construction segment. The company generates maximum revenue from Steel Segment.
80GF Score
Get the complete analysis for NSE:SALASAR
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SALASAR has been successfully added to your 
