Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Dimension Computer Technology Co's Debt-to-EBITDA or its related term are showing as below:
ROCO:6140'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -56.35 Med: 8.03 Max: 32.61
Current: -56.35
During the past 13 years, the highest Debt-to-EBITDA Ratio of Dimension Computer Technology Co was 32.61. The lowest was -56.35. And the median was 8.03.
ROCO:6140's Debt-to-EBITDA is ranked worse than 100% of 1799
companies
in the Hardware industry
Industry Median: 1.72
vs ROCO:6140: -56.35
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Dimension Computer Technology Co Debt-to-EBITDA Related Terms
Dimension Computer Technology Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Dimension Computer Technology Co Debt-to-EBITDA Chart
ROCO:6140 vs SNX, ARW, AVT: Debt-to-EBITDA Comparison
For the Electronics & Computer Distribution subindustry, Dimension Computer Technology Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Dimension Computer Technology Co Debt-to-EBITDA vs Hardware Industry
For the Hardware industry and Technology sector, Dimension Computer Technology Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Dimension Computer Technology Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Dimension Computer Technology Co (ROCO:6140) has a Debt-to-EBITDA of 6.80 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Dimension Computer Technology Co. This is 15% below median its historical median of 8.03. According to the industry distribution chart, Dimension Computer Technology Co ranks #999999 out of 1799 companies in the Hardware industry.
Is Dimension Computer Technology Co's Debt-to-EBITDA too high?
Dimension Computer Technology Co's current Debt-to-EBITDA of 6.80 is 15% below median its 10-year median of 8.03. The Hardware industry median Debt-to-EBITDA is 1.72. Dimension Computer Technology Co's value of 6.80 is 295.3% above this industry median. Based on the distribution chart, Dimension Computer Technology Co ranks #999999 out of 1799 companies in the Hardware industry, which is in the bottom quartile relative to peers. Overall, Dimension Computer Technology Co has a GF Score™ of 53/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Dimension Computer Technology Co's Debt-to-EBITDA compare to SNX and ARW?
According to the Hardware industry distribution chart, Dimension Computer Technology Co ranks #999999 out of 1799 companies for Debt-to-EBITDA. This places Dimension Computer Technology Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.72. Dimension Computer Technology Co's value of 6.80 is 295.3% above this benchmark. While the company's 10-year median is 8.03 vs. the industry median of 1.72, Dimension Computer Technology Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Hardware company?
The median Debt-to-EBITDA among Hardware companies is 1.72, based on 1,799 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Dimension Computer Technology Co's current Debt-to-EBITDA of 6.80 is 295.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Dimension Computer Technology Co. For the Hardware industry, the median Debt-to-EBITDA is 1.72 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Dimension Computer Technology Co's current Debt-to-EBITDA is 6.80, which is 15% below median its own 10-year median of 8.03. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Dimension Computer Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Dimension Computer Technology Co (ROCO:6140) is currently considered Possible Value Trap. The stock's GF Value™ is NT$26.93, compared to a current price of NT$16.25 — trading 39.7% below its estimated fair value. The current Debt-to-EBITDA is 6.80, which is 15% below median its 10-year median of 8.03 and 295.3% above the Hardware industry median of 1.72. Dimension Computer Technology Co's overall GF Score™ is 53/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Dimension Computer Technology Co (ROCO:6140), the current Debt-to-EBITDA is 6.80 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Dimension Computer Technology Co (ROCO:6140) Overvalued in 2026?
Based on GuruFocus' analysis, Dimension Computer Technology Co stock appears to be undervalued.
The current stock price of NT$16.25 is trading 39.7% below its estimated GF Value™ of NT$26.93.
GuruFocus considers Dimension Computer Technology Co to be Possible Value Trap.
Key valuation signals for ROCO:6140:
Debt-to-EBITDA: 6.80 (15% below median its 10-year median of 8.03)
GF Value™: NT$26.93 vs. price of NT$16.25 (39.7% below fair value)
Industry Position: 295.3% above the Hardware median (#999999 of 1799)
No single metric tells the full story. See the ROCO:6140 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Dimension Computer Technology Co Ltd operates as an e-solution provider in Taiwan. It offers services and products in the field of system integration. The company engages in the distribution of computer servers; and the provision of ongoing support for hardware structures and software applications to various industries. It offers solutions including Virtualization solutions, Lotus Notes Coexistence and Migration Solutions, Networks solutions, and others.
53GF Score
Get the complete analysis for ROCO:6140
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6140 has been successfully added to your 
