Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Best Precision Industrial CoROCO:6859 +2.68%81 Debt-to-EBITDA is 1.42 as of Jun. 2026, which is 45% above its 10-year median of 0.98. GuruFocus rates ROCO:6859 with a GF Score™ of 81/100 and a GF Value™ of NT$98.70 (Modestly Overvalued). The stock has 5 warning signs investors should review. Among 2,313 Industrial Products companies, Best Precision Industrial Co ranks better than 73.76% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Best Precision Industrial Co's Debt-to-EBITDA or its related term are showing as below:
ROCO:6859'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.48 Med: 0.98 Max: 1.24
Current: 0.58
During the past 7 years, the highest Debt-to-EBITDA Ratio of Best Precision Industrial Co was 1.24. The lowest was 0.48. And the median was 0.98.
ROCO:6859's Debt-to-EBITDA is ranked better than 73.76% of 2313
companies
in the Industrial Products industry
Industry Median: 1.69
vs ROCO:6859: 0.58
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Best Precision Industrial Co Debt-to-EBITDA Related Terms
Best Precision Industrial Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:6859 vs ATI, CRS, MLI: Debt-to-EBITDA Comparison
For the Metal Fabrication subindustry, Best Precision Industrial Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Best Precision Industrial Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Best Precision Industrial Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Best Precision Industrial Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Best Precision Industrial Co (ROCO:6859) has a Debt-to-EBITDA of 1.42 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Best Precision Industrial Co. This is 45% above median its historical median of 0.98. Over the past decade, Best Precision Industrial Co's Debt-to-EBITDA has ranged from 0.48 to 1.24. According to the industry distribution chart, Best Precision Industrial Co ranks #607 out of 2313 companies in the Industrial Products industry, placing it in the top 26.2%.
Is Best Precision Industrial Co's Debt-to-EBITDA too high?
Best Precision Industrial Co's current Debt-to-EBITDA of 1.42 is 45% above median its 10-year median of 0.98. Over the past 10 years, this metric has ranged from a low of 0.48 to a high of 1.24. The Industrial Products industry median Debt-to-EBITDA is 1.69. Best Precision Industrial Co's value of 1.42 is 16% below this industry median. Based on the distribution chart, Best Precision Industrial Co ranks #607 out of 2313 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Best Precision Industrial Co has a GF Score™ of 81/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Best Precision Industrial Co's Debt-to-EBITDA compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Best Precision Industrial Co ranks #607 out of 2313 companies for Debt-to-EBITDA. This puts Best Precision Industrial Co in the upper half of its industry. The industry median Debt-to-EBITDA is 1.69. Best Precision Industrial Co's value of 1.42 is 16% below this benchmark. Historically, Best Precision Industrial Co's own Debt-to-EBITDA has ranged from 0.48 to 1.24 over the past decade. While the company's 10-year median is 0.98 vs. the industry median of 1.69, Best Precision Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.69, based on 2,313 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Best Precision Industrial Co's current Debt-to-EBITDA of 1.42 is 16% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Best Precision Industrial Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Best Precision Industrial Co's current Debt-to-EBITDA is 1.42, which is 45% above median its own 10-year median of 0.98. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Best Precision Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, Best Precision Industrial Co (ROCO:6859) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$98.70, compared to a current price of NT$115.00 — trading 16.5% above its estimated fair value. The current Debt-to-EBITDA is 1.42, which is 45% above median its 10-year median of 0.98 and 16% below the Industrial Products industry median of 1.69. Best Precision Industrial Co's overall GF Score™ is 81/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Best Precision Industrial Co (ROCO:6859), the current Debt-to-EBITDA is 1.42 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Best Precision Industrial Co (ROCO:6859) Overvalued in 2026?
Based on GuruFocus' analysis, Best Precision Industrial Co stock appears to be overvalued.
The current stock price of NT$115.00 is trading 16.5% above its estimated GF Value™ of NT$98.70.
GuruFocus considers Best Precision Industrial Co to be Modestly Overvalued.
Key valuation signals for ROCO:6859:
Debt-to-EBITDA: 1.42 (45% above median its 10-year median of 0.98)
GF Value™: NT$98.70 vs. price of NT$115.00 (16.5% above fair value)
Industry Position: 16% below the Industrial Products median (#607 of 2313)
No single metric tells the full story. See the ROCO:6859 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Best Precision Industrial Co Ltd manufactures and distributes high precision molds and components. The Group mainly provides services such as the manufacturing of molds for optical components and is mainly engaged in the design, manufacture, and sales of precision optical molds and components. Its main products include mobile phones, VR/AR/MR, vehicles, special applications (optical communication / medical, etc.), optical lens molds, and precision optical metal components processing. The Group's revenues mainly comprise the revenue from the sale of optical lens molds. It generates maximum revenue from China, followed by Taiwan and others.
81GF Score
Get the complete analysis for ROCO:6859
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:6859 has been successfully added to your 
