Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Filing & Packing Materials Manufacturing Co Debt-to-EBITDA Related Terms
Filing & Packing Materials Manufacturing Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Filing & Packing Materials Manufacturing Co Debt-to-EBITDA Chart
Filing & Packing Materials Manufacturing Co Annual Data
SAU:2180 vs SW, AMCR, PKG: Debt-to-EBITDA Comparison
For the Packaging & Containers subindustry, Filing & Packing Materials Manufacturing Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Filing & Packing Materials Manufacturing Co Debt-to-EBITDA vs Packaging & Containers Industry
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Filing & Packing Materials Manufacturing Co (SAU:2180) has a Debt-to-EBITDA of 2.51 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Filing & Packing Materials Manufacturing Co. This is near median its historical median of 2.47. According to the industry distribution chart, Filing & Packing Materials Manufacturing Co ranks #229 out of 340 companies in the Packaging & Containers industry, placing it in the top 67.4%.
Is Filing & Packing Materials Manufacturing Co's Debt-to-EBITDA too high?
Filing & Packing Materials Manufacturing Co's current Debt-to-EBITDA of 2.51 is near median its 10-year median of 2.47. The Packaging & Containers industry median Debt-to-EBITDA is 2.52. Filing & Packing Materials Manufacturing Co's value of 2.51 is 0.2% below this industry median. Based on the distribution chart, Filing & Packing Materials Manufacturing Co ranks #229 out of 340 companies in the Packaging & Containers industry, which is below the industry midpoint. Overall, Filing & Packing Materials Manufacturing Co has a GF Score™ of 65/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Filing & Packing Materials Manufacturing Co's Debt-to-EBITDA compare to SW and AMCR?
According to the Packaging & Containers industry distribution chart, Filing & Packing Materials Manufacturing Co ranks #229 out of 340 companies for Debt-to-EBITDA. This places Filing & Packing Materials Manufacturing Co in the lower half of its industry. The industry median Debt-to-EBITDA is 2.52. Filing & Packing Materials Manufacturing Co's value of 2.51 is 0.2% below this benchmark. While the company's 10-year median is 2.47 vs. the industry median of 2.52, Filing & Packing Materials Manufacturing Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Packaging & Containers company?
The median Debt-to-EBITDA among Packaging & Containers companies is 2.52, based on 340 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Filing & Packing Materials Manufacturing Co's current Debt-to-EBITDA of 2.51 is 0.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Filing & Packing Materials Manufacturing Co. For the Packaging & Containers industry, the median Debt-to-EBITDA is 2.52 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Filing & Packing Materials Manufacturing Co's current Debt-to-EBITDA is 2.51, which is near median its own 10-year median of 2.47. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Filing & Packing Materials Manufacturing Co stock overvalued right now?
Based on GuruFocus' analysis, Filing & Packing Materials Manufacturing Co (SAU:2180) is currently considered Modestly Undervalued. The stock's GF Value™ is ﷼46.18, compared to a current price of ﷼36.68 — trading 20.6% below its estimated fair value. The current Debt-to-EBITDA is 2.51, which is near median its 10-year median of 2.47 and 0.2% below the Packaging & Containers industry median of 2.52. Filing & Packing Materials Manufacturing Co's overall GF Score™ is 65/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Filing & Packing Materials Manufacturing Co (SAU:2180), the current Debt-to-EBITDA is 2.51 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Filing & Packing Materials Manufacturing Co (SAU:2180) Overvalued in 2026?
Based on GuruFocus' analysis, Filing & Packing Materials Manufacturing Co stock appears to be undervalued.
The current stock price of ﷼36.68 is trading 20.6% below its estimated GF Value™ of ﷼46.18.
GuruFocus considers Filing & Packing Materials Manufacturing Co to be Modestly Undervalued.
Key valuation signals for SAU:2180:
Debt-to-EBITDA: 2.51 (near median its 10-year median of 2.47)
GF Value™: ﷼46.18 vs. price of ﷼36.68 (20.6% below fair value)
Industry Position: 0.2% below the Packaging & Containers median (#229 of 340)
No single metric tells the full story. See the SAU:2180 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Filing & Packing Materials Manufacturing Co is engaged in weaving textiles from industrial threads such as nylon, cutting and detailing covers for machines and goods, manufacturing plastics in their primary forms, manufacturing industrial threads, and manufacturing containers and bags from plastics. The operating segments of the company are: Packing and packaging, and Technical textiles. The majority of revenue is derived from the packing and packaging sector, which is engaged in weaving textiles from industrial threads such as nylon, manufacturing bags from plastics, manufacturing plastics (plastics) in their primary forms, spinning and preparing plant fibers such as hemp and staple. Geographically, the maximum revenue is derived from the Kingdom of Saudi Arabia.
65GF Score
Get the complete analysis for SAU:2180
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SAU:2180 has been successfully added to your 
