Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
SHSE:601882'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0 Med: 0.04 Max: 1.69
Current: 0.12
During the past 13 years, the highest Debt-to-EBITDA Ratio of Ningbo Haitian Precision Machinery Co was 1.69. The lowest was 0.00. And the median was 0.04.
SHSE:601882's Debt-to-EBITDA is ranked better than 89.74% of 2310
companies
in the Industrial Products industry
Industry Median: 1.69
vs SHSE:601882: 0.12
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Ningbo Haitian Precision Machinery Co Debt-to-EBITDA Related Terms
Ningbo Haitian Precision Machinery Co Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Ningbo Haitian Precision Machinery Co Debt-to-EBITDA Chart
SHSE:601882 vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Ningbo Haitian Precision Machinery Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ningbo Haitian Precision Machinery Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Ningbo Haitian Precision Machinery Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Ningbo Haitian Precision Machinery Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Ningbo Haitian Precision Machinery Co (SHSE:601882) has a Debt-to-EBITDA of 0.08 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Ningbo Haitian Precision Machinery Co. This is 100% above median its historical median of 0.04. According to the industry distribution chart, Ningbo Haitian Precision Machinery Co ranks #237 out of 2310 companies in the Industrial Products industry, placing it in the top 10.3%.
Is Ningbo Haitian Precision Machinery Co's Debt-to-EBITDA too high?
Ningbo Haitian Precision Machinery Co's current Debt-to-EBITDA of 0.08 is 100% above median its 10-year median of 0.04. The Industrial Products industry median Debt-to-EBITDA is 1.69. Ningbo Haitian Precision Machinery Co's value of 0.08 is 95.3% below this industry median. Based on the distribution chart, Ningbo Haitian Precision Machinery Co ranks #237 out of 2310 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Ningbo Haitian Precision Machinery Co has a GF Score™ of 95/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Ningbo Haitian Precision Machinery Co's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Ningbo Haitian Precision Machinery Co ranks #237 out of 2310 companies for Debt-to-EBITDA. This places Ningbo Haitian Precision Machinery Co in the top 10% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 1.69. Ningbo Haitian Precision Machinery Co's value of 0.08 is 95.3% below this benchmark. While the company's 10-year median is 0.04 vs. the industry median of 1.69, Ningbo Haitian Precision Machinery Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.69, based on 2,310 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ningbo Haitian Precision Machinery Co's current Debt-to-EBITDA of 0.08 is 95.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Ningbo Haitian Precision Machinery Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ningbo Haitian Precision Machinery Co's current Debt-to-EBITDA is 0.08, which is 100% above median its own 10-year median of 0.04. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ningbo Haitian Precision Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Ningbo Haitian Precision Machinery Co (SHSE:601882) is currently considered Fairly Valued. The stock's GF Value™ is ¥23.82, compared to a current price of ¥21.83 — trading 8.4% below its estimated fair value. The current Debt-to-EBITDA is 0.08, which is 100% above median its 10-year median of 0.04 and 95.3% below the Industrial Products industry median of 1.69. Ningbo Haitian Precision Machinery Co's overall GF Score™ is 95/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Ningbo Haitian Precision Machinery Co (SHSE:601882), the current Debt-to-EBITDA is 0.08 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ningbo Haitian Precision Machinery Co (SHSE:601882) Overvalued in 2026?
Based on GuruFocus' analysis, Ningbo Haitian Precision Machinery Co stock appears to be undervalued.
The current stock price of ¥21.83 is trading 8.4% below its estimated GF Value™ of ¥23.82.
GuruFocus considers Ningbo Haitian Precision Machinery Co to be Fairly Valued.
Key valuation signals for SHSE:601882:
Debt-to-EBITDA: 0.08 (100% above median its 10-year median of 0.04)
GF Value™: ¥23.82 vs. price of ¥21.83 (8.4% below fair value)
Industry Position: 95.3% below the Industrial Products median (#237 of 2310)
No single metric tells the full story. See the SHSE:601882 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ningbo Haitian Precision Machinery Co Ltd is the manufacturer of machine tools. The company produces a line of machine tools that includes horizontal machining centre series, vertical machining centre series, double-column machining centre series, CNC lathe/turning centre and milling machining centre series and high-speed double-column machining centre series. Its products are mainly used in military, automotive, aerospace, locomotive, energy, shipping and other industry sectors.
95GF Score
Get the complete analysis for SHSE:601882
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:601882 has been successfully added to your 
