Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Anderson IndustrialTPE:1528 -1.55%61 Debt-to-EBITDA is 59.40 as of Jun. 2026, which is 617% above its 10-year median of 8.28. GuruFocus rates TPE:1528 with a GF Score™ of 61/100 and a GF Value™ of NT$11.29 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 2,331 Industrial Products companies, Anderson Industrial ranks worse than 95.8% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Anderson Industrial's Debt-to-EBITDA or its related term are showing as below:
TPE:1528'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -20.98 Med: 8.28 Max: 129.37
Current: 10.16
During the past 13 years, the highest Debt-to-EBITDA Ratio of Anderson Industrial was 129.37. The lowest was -20.98. And the median was 8.28.
TPE:1528's Debt-to-EBITDA is ranked worse than 95.8% of 2331
companies
in the Industrial Products industry
Industry Median: 1.68
vs TPE:1528: 10.16
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Anderson Industrial Debt-to-EBITDA Related Terms
Anderson Industrial Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Anderson Industrial's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:1528 vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Anderson Industrial's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Anderson Industrial Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Anderson Industrial's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Anderson Industrial's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Jun. 2026) EBITDA data.
Anderson Industrial (TPE:1528) has a Debt-to-EBITDA of 59.40 as of Jun. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Anderson Industrial. This is 617% above median its historical median of 8.28. According to the industry distribution chart, Anderson Industrial ranks #2233 out of 2331 companies in the Industrial Products industry, placing it in the top 95.8%.
Is Anderson Industrial's Debt-to-EBITDA too high?
Anderson Industrial's current Debt-to-EBITDA of 59.40 is 617% above median its 10-year median of 8.28. The Industrial Products industry median Debt-to-EBITDA is 1.68. Anderson Industrial's value of 59.40 is 3435.7% above this industry median. Based on the distribution chart, Anderson Industrial ranks #2233 out of 2331 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Anderson Industrial has a GF Score™ of 61/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Anderson Industrial's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Anderson Industrial ranks #2233 out of 2331 companies for Debt-to-EBITDA. This places Anderson Industrial in the lower half of its industry. The industry median Debt-to-EBITDA is 1.68. Anderson Industrial's value of 59.40 is 3435.7% above this benchmark. While the company's 10-year median is 8.28 vs. the industry median of 1.68, Anderson Industrial has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.68, based on 2,331 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Anderson Industrial's current Debt-to-EBITDA of 59.40 is 3435.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Anderson Industrial. For the Industrial Products industry, the median Debt-to-EBITDA is 1.68 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Anderson Industrial's current Debt-to-EBITDA is 59.40, which is 617% above median its own 10-year median of 8.28. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Anderson Industrial stock overvalued right now?
Based on GuruFocus' analysis, Anderson Industrial (TPE:1528) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$11.29, compared to a current price of NT$19.10 — trading 69.2% above its estimated fair value. The current Debt-to-EBITDA is 59.40, which is 617% above median its 10-year median of 8.28 and 3435.7% above the Industrial Products industry median of 1.68. Anderson Industrial's overall GF Score™ is 61/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Anderson Industrial (TPE:1528), the current Debt-to-EBITDA is 59.40 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Anderson Industrial (TPE:1528) Overvalued in 2026?
Based on GuruFocus' analysis, Anderson Industrial stock appears to be overvalued.
The current stock price of NT$19.10 is trading 69.2% above its estimated GF Value™ of NT$11.29.
GuruFocus considers Anderson Industrial to be Significantly Overvalued.
Key valuation signals for TPE:1528:
Debt-to-EBITDA: 59.40 (617% above median its 10-year median of 8.28)
GF Value™: NT$11.29 vs. price of NT$19.10 (69.2% above fair value)
Industry Position: 3435.7% above the Industrial Products median (#2233 of 2331)
No single metric tells the full story. See the TPE:1528 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Anderson Industrial Corp is mainly engaged in the design, manufacture, sale, import, and export of computer numerical control (CNC) machinery, tooling, lumber, wood panels, and building materials. It serves various industries such as Aerospace, Automotive, Composites Materials, Marine, Railway, Wood, metal, and Other Industries. Some of the products include STRATOS IP Series, ASTRIXX Series, MASS 5 Axis Series, AXXIOM Series, ANDIMAXX Series, and Others. Geographically, the company operates in Asia, Europe, North America, South America, and Others. It derives maximum revenue from Asia.
61GF Score
Get the complete analysis for TPE:1528
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1528 has been successfully added to your 
