Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Jung Shing Wire CoTPE:1617 74 Debt-to-EBITDA is 4.25 as of Mar. 2026, which is 12% above its 10-year median of 3.78. GuruFocus rates TPE:1617 with a GF Score™ of 74/100 and a GF Value™ of NT$17.94 (Fairly Valued). The stock has 6 warning signs investors should review. Among 2,340 Industrial Products companies, Jung Shing Wire Co ranks worse than 55.34% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Jung Shing Wire Co's Debt-to-EBITDA or its related term are showing as below:
TPE:1617'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 2.05 Med: 3.78 Max: 6.53
Current: 2.05
During the past 13 years, the highest Debt-to-EBITDA Ratio of Jung Shing Wire Co was 6.53. The lowest was 2.05. And the median was 3.78.
TPE:1617's Debt-to-EBITDA is ranked worse than 55.34% of 2340
companies
in the Industrial Products industry
Industry Median: 1.665
vs TPE:1617: 2.05
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Jung Shing Wire Co Debt-to-EBITDA Related Terms
Jung Shing Wire Co Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Jung Shing Wire Co's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electrical Equipment & Parts subindustry, Jung Shing Wire Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jung Shing Wire Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Jung Shing Wire Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Jung Shing Wire Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Jung Shing Wire Co (TPE:1617) has a Debt-to-EBITDA of 4.25 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Jung Shing Wire Co. This is 12% above median its historical median of 3.78. Over the past decade, Jung Shing Wire Co's Debt-to-EBITDA has ranged from 2.05 to 6.53. According to the industry distribution chart, Jung Shing Wire Co ranks #1295 out of 2340 companies in the Industrial Products industry, placing it in the top 55.3%.
Is Jung Shing Wire Co's Debt-to-EBITDA too high?
Jung Shing Wire Co's current Debt-to-EBITDA of 4.25 is 12% above median its 10-year median of 3.78. Over the past 10 years, this metric has ranged from a low of 2.05 to a high of 6.53. The Industrial Products industry median Debt-to-EBITDA is 1.67. Jung Shing Wire Co's value of 4.25 is 155.3% above this industry median. Based on the distribution chart, Jung Shing Wire Co ranks #1295 out of 2340 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Jung Shing Wire Co has a GF Score™ of 74/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Jung Shing Wire Co's Debt-to-EBITDA compare to VRT and BE?
According to the Industrial Products industry distribution chart, Jung Shing Wire Co ranks #1295 out of 2340 companies for Debt-to-EBITDA. This places Jung Shing Wire Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.67. Jung Shing Wire Co's value of 4.25 is 155.3% above this benchmark. Historically, Jung Shing Wire Co's own Debt-to-EBITDA has ranged from 2.05 to 6.53 over the past decade. While the company's 10-year median is 3.78 vs. the industry median of 1.67, Jung Shing Wire Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.67, based on 2,340 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jung Shing Wire Co's current Debt-to-EBITDA of 4.25 is 155.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Jung Shing Wire Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.67 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jung Shing Wire Co's current Debt-to-EBITDA is 4.25, which is 12% above median its own 10-year median of 3.78. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jung Shing Wire Co stock overvalued right now?
Based on GuruFocus' analysis, Jung Shing Wire Co (TPE:1617) is currently considered Fairly Valued. The stock's GF Value™ is NT$17.94, compared to a current price of NT$17.55 — trading 2.2% below its estimated fair value. The current Debt-to-EBITDA is 4.25, which is 12% above median its 10-year median of 3.78 and 155.3% above the Industrial Products industry median of 1.67. Jung Shing Wire Co's overall GF Score™ is 74/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Jung Shing Wire Co (TPE:1617), the current Debt-to-EBITDA is 4.25 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jung Shing Wire Co (TPE:1617) Overvalued in 2026?
Based on GuruFocus' analysis, Jung Shing Wire Co stock appears to be undervalued.
The current stock price of NT$17.55 is trading 2.2% below its estimated GF Value™ of NT$17.94.
GuruFocus considers Jung Shing Wire Co to be Fairly Valued.
Key valuation signals for TPE:1617:
Debt-to-EBITDA: 4.25 (12% above median its 10-year median of 3.78)
GF Value™: NT$17.94 vs. price of NT$17.55 (2.2% below fair value)
Industry Position: 155.3% above the Industrial Products median (#1295 of 2340)
No single metric tells the full story. See the TPE:1617 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jung Shing Wire Co Ltd is engaged in the manufacturing and processing of enameled wires and downstream products, and the trading of related machinery and equipment. Its product portfolio comprises general enameled wire, self-melting enameled wire, and special enameled wire. The group has a reporting segment: the wire department, which manufactures various kinds of degaussing rings, enameled wire, and Litz wire. Geographically, the company generates maximum revenue from Mainland China, followed by Taiwan, Vietnam, the Philippines, Japan, and other countries.
74GF Score
Get the complete analysis for TPE:1617
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1617 has been successfully added to your 
