Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
EnnoconnTPE:6414 -9.76%80 Debt-to-EBITDA is 2.51 as of Mar. 2026, which is 27% below its 10-year median of 3.44. GuruFocus rates TPE:6414 with a GF Score™ of 80/100 and a GF Value™ of NT$320.67 (Modestly Overvalued). The stock has 5 warning signs investors should review. Among 1,791 Hardware companies, Ennoconn ranks worse than 60.02% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Ennoconn's Debt-to-EBITDA or its related term are showing as below:
TPE:6414'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 2.01 Med: 3.44 Max: 4.59
Current: 2.49
During the past 13 years, the highest Debt-to-EBITDA Ratio of Ennoconn was 4.59. The lowest was 2.01. And the median was 3.44.
TPE:6414's Debt-to-EBITDA is ranked worse than 60.02% of 1791
companies
in the Hardware industry
Industry Median: 1.71
vs TPE:6414: 2.49
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Ennoconn Debt-to-EBITDA Related Terms
Ennoconn Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Ennoconn's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:6414 vs DELL, ANET, SNDK: Debt-to-EBITDA Comparison
For the Computer Hardware subindustry, Ennoconn's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ennoconn Debt-to-EBITDA vs Hardware Industry
For the Hardware industry and Technology sector, Ennoconn's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Ennoconn's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Ennoconn (TPE:6414) has a Debt-to-EBITDA of 2.51 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Ennoconn. This is 27% below median its historical median of 3.44. Over the past decade, Ennoconn's Debt-to-EBITDA has ranged from 2.01 to 4.59. According to the industry distribution chart, Ennoconn ranks #1075 out of 1791 companies in the Hardware industry, placing it in the top 60%.
Is Ennoconn's Debt-to-EBITDA too high?
Ennoconn's current Debt-to-EBITDA of 2.51 is 27% below median its 10-year median of 3.44. Over the past 10 years, this metric has ranged from a low of 2.01 to a high of 4.59. The Hardware industry median Debt-to-EBITDA is 1.71. Ennoconn's value of 2.51 is 46.8% above this industry median. Based on the distribution chart, Ennoconn ranks #1075 out of 1791 companies in the Hardware industry, which is below the industry midpoint. Overall, Ennoconn has a GF Score™ of 80/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Ennoconn's Debt-to-EBITDA compare to DELL and ANET?
According to the Hardware industry distribution chart, Ennoconn ranks #1075 out of 1791 companies for Debt-to-EBITDA. This places Ennoconn in the lower half of its industry. The industry median Debt-to-EBITDA is 1.71. Ennoconn's value of 2.51 is 46.8% above this benchmark. Historically, Ennoconn's own Debt-to-EBITDA has ranged from 2.01 to 4.59 over the past decade. While the company's 10-year median is 3.44 vs. the industry median of 1.71, Ennoconn has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Hardware company?
The median Debt-to-EBITDA among Hardware companies is 1.71, based on 1,791 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ennoconn's current Debt-to-EBITDA of 2.51 is 46.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Ennoconn. For the Hardware industry, the median Debt-to-EBITDA is 1.71 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ennoconn's current Debt-to-EBITDA is 2.51, which is 27% below median its own 10-year median of 3.44. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ennoconn stock overvalued right now?
Based on GuruFocus' analysis, Ennoconn (TPE:6414) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$320.67, compared to a current price of NT$407.00 — trading 26.9% above its estimated fair value. The current Debt-to-EBITDA is 2.51, which is 27% below median its 10-year median of 3.44 and 46.8% above the Hardware industry median of 1.71. Ennoconn's overall GF Score™ is 80/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Ennoconn (TPE:6414), the current Debt-to-EBITDA is 2.51 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ennoconn (TPE:6414) Overvalued in 2026?
Based on GuruFocus' analysis, Ennoconn stock appears to be overvalued.
The current stock price of NT$407.00 is trading 26.9% above its estimated GF Value™ of NT$320.67.
GuruFocus considers Ennoconn to be Modestly Overvalued.
Key valuation signals for TPE:6414:
Debt-to-EBITDA: 2.51 (27% below median its 10-year median of 3.44)
GF Value™: NT$320.67 vs. price of NT$407.00 (26.9% above fair value)
Industry Position: 46.8% above the Hardware median (#1075 of 1791)
No single metric tells the full story. See the TPE:6414 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ennoconn Corp and its subsidiaries are mainly engaged in the manufacturing and sales of industrial computers and IoT devices, intelligent manufacturing system integration, artificial intelligence and information software development services, data processing and cloud computing services, electronic component design and manufacturing, as well as international trade and import/export of telecommunications radio frequency equipment. The Group's operating departments are: the Industrial Internet of Things Business Group, which generates the maximum revenue; the Intelligent Software and Solutions Business Group; and the Smart Factory and Facility Services Business Group. Geographically, it derives the majority of its revenue from Europe, with the remainder from Taiwan, China, and other markets.
80GF Score
Get the complete analysis for TPE:6414
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:6414 has been successfully added to your 
