Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Kawata Mfg CoTSE:6292 -1.29%57 Debt-to-EBITDA is 4.01 as of Mar. 2026, which is 7% below its 10-year median of 4.31. GuruFocus rates TSE:6292 with a GF Score™ of 57/100 and a GF Value™ of 円766.45 (Fairly Valued). The stock has 5 warning signs investors should review. Among 2,308 Industrial Products companies, Kawata Mfg Co ranks worse than 88.08% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Kawata Mfg Co's Debt-to-EBITDA or its related term are showing as below:
TSE:6292'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 2.38 Med: 4.31 Max: 8.04
Current: 8.04
During the past 13 years, the highest Debt-to-EBITDA Ratio of Kawata Mfg Co was 8.04. The lowest was 2.38. And the median was 4.31.
TSE:6292's Debt-to-EBITDA is ranked worse than 88.08% of 2308
companies
in the Industrial Products industry
Industry Median: 1.69
vs TSE:6292: 8.04
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Kawata Mfg Co Debt-to-EBITDA Related Terms
Kawata Mfg Co Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Kawata Mfg Co's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6292 vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Kawata Mfg Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kawata Mfg Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kawata Mfg Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Kawata Mfg Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Kawata Mfg Co (TSE:6292) has a Debt-to-EBITDA of 4.01 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Kawata Mfg Co. This is near median its historical median of 4.31. Over the past decade, Kawata Mfg Co's Debt-to-EBITDA has ranged from 2.38 to 8.04. According to the industry distribution chart, Kawata Mfg Co ranks #2033 out of 2308 companies in the Industrial Products industry, placing it in the top 88.1%.
Is Kawata Mfg Co's Debt-to-EBITDA too high?
Kawata Mfg Co's current Debt-to-EBITDA of 4.01 is near median its 10-year median of 4.31. Over the past 10 years, this metric has ranged from a low of 2.38 to a high of 8.04. The Industrial Products industry median Debt-to-EBITDA is 1.69. Kawata Mfg Co's value of 4.01 is 137.3% above this industry median. Based on the distribution chart, Kawata Mfg Co ranks #2033 out of 2308 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Kawata Mfg Co has a GF Score™ of 57/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Kawata Mfg Co's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Kawata Mfg Co ranks #2033 out of 2308 companies for Debt-to-EBITDA. This places Kawata Mfg Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.69. Kawata Mfg Co's value of 4.01 is 137.3% above this benchmark. Historically, Kawata Mfg Co's own Debt-to-EBITDA has ranged from 2.38 to 8.04 over the past decade. While the company's 10-year median is 4.31 vs. the industry median of 1.69, Kawata Mfg Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.69, based on 2,308 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kawata Mfg Co's current Debt-to-EBITDA of 4.01 is 137.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Kawata Mfg Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kawata Mfg Co's current Debt-to-EBITDA is 4.01, which is near median its own 10-year median of 4.31. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kawata Mfg Co stock overvalued right now?
Based on GuruFocus' analysis, Kawata Mfg Co (TSE:6292) is currently considered Fairly Valued. The stock's GF Value™ is 円766.45, compared to a current price of 円844.00 — trading 10.1% above its estimated fair value. The current Debt-to-EBITDA is 4.01, which is near median its 10-year median of 4.31 and 137.3% above the Industrial Products industry median of 1.69. Kawata Mfg Co's overall GF Score™ is 57/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Kawata Mfg Co (TSE:6292), the current Debt-to-EBITDA is 4.01 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kawata Mfg Co (TSE:6292) Overvalued in 2026?
Based on GuruFocus' analysis, Kawata Mfg Co stock appears to be overvalued.
The current stock price of 円844.00 is trading 10.1% above its estimated GF Value™ of 円766.45.
GuruFocus considers Kawata Mfg Co to be Fairly Valued.
Key valuation signals for TSE:6292:
Debt-to-EBITDA: 4.01 (near median its 10-year median of 4.31)
GF Value™: 円766.45 vs. price of 円844.00 (10.1% above fair value)
Industry Position: 137.3% above the Industrial Products median (#2033 of 2308)
No single metric tells the full story. See the TSE:6292 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kawata Mfg Co Ltd is engaged in design and manufacturing of auxiliary equipment and systems for plastics processing. It manufactures & develops powder & granular material processing equipment & systems. It offers conveying machines, batch blenders, dryers, mold temperature controllers, granulators, powder processing machines & systems.
57GF Score
Get the complete analysis for TSE:6292
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6292 has been successfully added to your 
