Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Unozawa-Gumi Iron WorksTSE:6396 -3.54%68 Debt-to-EBITDA is 1.02 as of Mar. 2026, which is 80% below its 10-year median of 5.02. GuruFocus rates TSE:6396 with a GF Score™ of 68/100 and a GF Value™ of 円2,774.38 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 2,340 Industrial Products companies, Unozawa-Gumi Iron Works ranks worse than 51.32% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Unozawa-Gumi Iron Works's Debt-to-EBITDA or its related term are showing as below:
TSE:6396'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 1.77 Med: 5.02 Max: 9.31
Current: 1.77
During the past 13 years, the highest Debt-to-EBITDA Ratio of Unozawa-Gumi Iron Works was 9.31. The lowest was 1.77. And the median was 5.02.
TSE:6396's Debt-to-EBITDA is ranked worse than 51.32% of 2340
companies
in the Industrial Products industry
Industry Median: 1.665
vs TSE:6396: 1.77
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Unozawa-Gumi Iron Works Debt-to-EBITDA Related Terms
Unozawa-Gumi Iron Works Debt-to-EBITDA Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6396 vs GEV, ETN, PH: Debt-to-EBITDA Comparison
For the Specialty Industrial Machinery subindustry, Unozawa-Gumi Iron Works's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Unozawa-Gumi Iron Works Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Unozawa-Gumi Iron Works's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Unozawa-Gumi Iron Works's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Unozawa-Gumi Iron Works (TSE:6396) has a Debt-to-EBITDA of 1.02 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Unozawa-Gumi Iron Works. This is 80% below median its historical median of 5.02. Over the past decade, Unozawa-Gumi Iron Works' Debt-to-EBITDA has ranged from 1.77 to 9.31. According to the industry distribution chart, Unozawa-Gumi Iron Works ranks #1201 out of 2340 companies in the Industrial Products industry, placing it in the top 51.3%.
Is Unozawa-Gumi Iron Works' Debt-to-EBITDA too high?
Unozawa-Gumi Iron Works' current Debt-to-EBITDA of 1.02 is 80% below median its 10-year median of 5.02. Over the past 10 years, this metric has ranged from a low of 1.77 to a high of 9.31. The Industrial Products industry median Debt-to-EBITDA is 1.67. Unozawa-Gumi Iron Works' value of 1.02 is 38.7% below this industry median. Based on the distribution chart, Unozawa-Gumi Iron Works ranks #1201 out of 2340 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Unozawa-Gumi Iron Works has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Unozawa-Gumi Iron Works' Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Unozawa-Gumi Iron Works ranks #1201 out of 2340 companies for Debt-to-EBITDA. This places Unozawa-Gumi Iron Works in the lower half of its industry. The industry median Debt-to-EBITDA is 1.67. Unozawa-Gumi Iron Works' value of 1.02 is 38.7% below this benchmark. Historically, Unozawa-Gumi Iron Works' own Debt-to-EBITDA has ranged from 1.77 to 9.31 over the past decade. While the company's 10-year median is 5.02 vs. the industry median of 1.67, Unozawa-Gumi Iron Works has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.67, based on 2,340 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Unozawa-Gumi Iron Works's current Debt-to-EBITDA of 1.02 is 38.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Unozawa-Gumi Iron Works. For the Industrial Products industry, the median Debt-to-EBITDA is 1.67 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Unozawa-Gumi Iron Works's current Debt-to-EBITDA is 1.02, which is 80% below median its own 10-year median of 5.02. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Unozawa-Gumi Iron Works stock overvalued right now?
Based on GuruFocus' analysis, Unozawa-Gumi Iron Works (TSE:6396) is currently considered Significantly Overvalued. The stock's GF Value™ is 円2,774.38, compared to a current price of 円4,500.00 — trading 62.2% above its estimated fair value. The current Debt-to-EBITDA is 1.02, which is 80% below median its 10-year median of 5.02 and 38.7% below the Industrial Products industry median of 1.67. Unozawa-Gumi Iron Works' overall GF Score™ is 68/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Unozawa-Gumi Iron Works (TSE:6396), the current Debt-to-EBITDA is 1.02 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Unozawa-Gumi Iron Works (TSE:6396) Overvalued in 2026?
Based on GuruFocus' analysis, Unozawa-Gumi Iron Works stock appears to be overvalued.
The current stock price of 円4,500.00 is trading 62.2% above its estimated GF Value™ of 円2,774.38.
GuruFocus considers Unozawa-Gumi Iron Works to be Significantly Overvalued.
Key valuation signals for TSE:6396:
Debt-to-EBITDA: 1.02 (80% below median its 10-year median of 5.02)
GF Value™: 円2,774.38 vs. price of 円4,500.00 (62.2% above fair value)
Industry Position: 38.7% below the Industrial Products median (#1201 of 2340)
No single metric tells the full story. See the TSE:6396 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Unozawa-Gumi Iron Works Ltd is a Japan-based company engages in the manufacture and sale of fluid machinery, vacuum pumps, and blowers. The company offers dry vacuum pumps, rotary blowers and vacuum pumps, water ring vacuum pumps, mechanical boosters, and de-aerators.
68GF Score
Get the complete analysis for TSE:6396
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6396 has been successfully added to your 
