Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
DMC GlobalFRA:DM5 +19.15%63 Debt-to-Equity is 0.25 as of Jun. 2026, which is 9% above its 10-year median of 0.23. GuruFocus rates FRA:DM5 with a GF Score™ of 63/100 and a GF Value™ of €6.91 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 516 Conglomerates companies, DMC Global ranks better than 68.8% on this metric.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for DMC Global's Debt-to-Equity or its related term are showing as below:
FRA:DM5'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0 Med: 0.23 Max: 0.56
Current: 0.25
During the past 13 years, the highest Debt-to-Equity Ratio of DMC Global was 0.56. The lowest was 0.00. And the median was 0.23.
FRA:DM5's Debt-to-Equity is ranked better than 68.8% of 516
companies
in the Conglomerates industry
Industry Median: 0.55
vs FRA:DM5: 0.25
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
DMC Global Debt-to-Equity Related Terms
DMC Global Debt-to-Equity Historical Data
* Premium members only.
The historical data trend for DMC Global's Debt-to-Equity can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
FRA:DM5 vs TUSK, AIRT, GPUS: Debt-to-Equity Comparison
For the Conglomerates subindustry, DMC Global's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
DMC Global Debt-to-Equity vs Conglomerates Industry
For the Conglomerates industry and Industrials sector, DMC Global's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where DMC Global's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
DMC Global (FRA:DM5) has a Debt-to-Equity of 0.25 as of Jun. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on DMC Global and its competitors. This is near median its historical median of 0.23. According to the industry distribution chart, DMC Global ranks #161 out of 516 companies in the Conglomerates industry, placing it in the top 31.2%.
Is DMC Global's Debt-to-Equity too high?
DMC Global's current Debt-to-Equity of 0.25 is near median its 10-year median of 0.23. The Conglomerates industry median Debt-to-Equity is 0.55. DMC Global's value of 0.25 is 54.5% below this industry median. Based on the distribution chart, DMC Global ranks #161 out of 516 companies in the Conglomerates industry, which is above the industry midpoint. Overall, DMC Global has a GF Score™ of 63/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does DMC Global's Debt-to-Equity compare to TUSK and AIRT?
According to the Conglomerates industry distribution chart, DMC Global ranks #161 out of 516 companies for Debt-to-Equity. This puts DMC Global in the upper half of its industry. The industry median Debt-to-Equity is 0.55. DMC Global's value of 0.25 is 54.5% below this benchmark. While the company's 10-year median is 0.23 vs. the industry median of 0.55, DMC Global has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for a Conglomerates company?
The median Debt-to-Equity among Conglomerates companies is 0.55, based on 516 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. DMC Global's current Debt-to-Equity of 0.25 is 54.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on DMC Global and its competitors. For the Conglomerates industry, the median Debt-to-Equity is 0.55 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. DMC Global's current Debt-to-Equity is 0.25, which is near median its own 10-year median of 0.23. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is DMC Global stock overvalued right now?
Based on GuruFocus' analysis, DMC Global (FRA:DM5) is currently considered Modestly Undervalued. The stock's GF Value™ is €6.91, compared to a current price of €5.60 — trading 19% below its estimated fair value. The current Debt-to-Equity is 0.25, which is near median its 10-year median of 0.23 and 54.5% below the Conglomerates industry median of 0.55. DMC Global's overall GF Score™ is 63/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For DMC Global (FRA:DM5), the current Debt-to-Equity is 0.25 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is DMC Global (FRA:DM5) Overvalued in 2026?
Based on GuruFocus' analysis, DMC Global stock appears to be undervalued.
The current stock price of €5.60 is trading 19% below its estimated GF Value™ of €6.91.
GuruFocus considers DMC Global to be Modestly Undervalued.
Key valuation signals for FRA:DM5:
Debt-to-Equity: 0.25 (near median its 10-year median of 0.23)
GF Value™: €6.91 vs. price of €5.60 (19% below fair value)
Industry Position: 54.5% below the Conglomerates median (#161 of 516)
No single metric tells the full story. See the FRA:DM5 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
DMC Global Inc operates a diversified family of technical product and process businesses serving the energy, industrial and infrastructure markets. Its business is organized into three segments: Arcadia, DynaEnergetics, and NobelClad. Arcadia Products supplies architectural building products, including exterior and interior framing systems, windows, urtain walls, storefronts etc to the commercial construction market. NobelClad is involved in the production of explosion-welded clad metal plates for use in the construction of corrosion-resistant industrial processing equipment and specialized transition joints. DynaEnergetics driver, designs manufactures and distributes products utilized by the oil and gas industry principally for the perforation of oil and gas wells.
63GF Score
Get the complete analysis for FRA:DM5
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DM5 has been successfully added to your 
