Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Global TEK Fabrication CoTPE:4566 -1.50%78 Debt-to-Equity is 0.81 as of Jun. 2026, which is 14% above its 10-year median of 0.71. GuruFocus rates TPE:4566 with a GF Score™ of 78/100 and a GF Value™ of NT$65.68 (Fairly Valued). The stock has 7 warning signs investors should review. Among 2,688 Industrial Products companies, Global TEK Fabrication Co ranks worse than 81.18% on this metric.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Global TEK Fabrication Co's Debt-to-Equity or its related term are showing as below:
TPE:4566'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0.52 Med: 0.71 Max: 1.19
Current: 0.81
During the past 13 years, the highest Debt-to-Equity Ratio of Global TEK Fabrication Co was 1.19. The lowest was 0.52. And the median was 0.71.
TPE:4566's Debt-to-Equity is ranked worse than 81.18% of 2688
companies
in the Industrial Products industry
Industry Median: 0.29
vs TPE:4566: 0.81
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Global TEK Fabrication Co Debt-to-Equity Related Terms
Global TEK Fabrication Co Debt-to-Equity Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:4566 vs GEV, ETN, PH: Debt-to-Equity Comparison
For the Specialty Industrial Machinery subindustry, Global TEK Fabrication Co's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Global TEK Fabrication Co Debt-to-Equity vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Global TEK Fabrication Co's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Global TEK Fabrication Co's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Global TEK Fabrication Co (TPE:4566) has a Debt-to-Equity of 0.81 as of Jun. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Global TEK Fabrication Co and its competitors. This is 14% above median its historical median of 0.71. Over the past decade, Global TEK Fabrication Co's Debt-to-Equity has ranged from 0.52 to 1.19. According to the industry distribution chart, Global TEK Fabrication Co ranks #2182 out of 2688 companies in the Industrial Products industry, placing it in the top 81.2%.
Is Global TEK Fabrication Co's Debt-to-Equity too high?
Global TEK Fabrication Co's current Debt-to-Equity of 0.81 is 14% above median its 10-year median of 0.71. Over the past 10 years, this metric has ranged from a low of 0.52 to a high of 1.19. The Industrial Products industry median Debt-to-Equity is 0.29. Global TEK Fabrication Co's value of 0.81 is 179.3% above this industry median. Based on the distribution chart, Global TEK Fabrication Co ranks #2182 out of 2688 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Global TEK Fabrication Co has a GF Score™ of 78/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Global TEK Fabrication Co's Debt-to-Equity compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Global TEK Fabrication Co ranks #2182 out of 2688 companies for Debt-to-Equity. This places Global TEK Fabrication Co in the lower half of its industry. The industry median Debt-to-Equity is 0.29. Global TEK Fabrication Co's value of 0.81 is 179.3% above this benchmark. Historically, Global TEK Fabrication Co's own Debt-to-Equity has ranged from 0.52 to 1.19 over the past decade. While the company's 10-year median is 0.71 vs. the industry median of 0.29, Global TEK Fabrication Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for an Industrial Products company?
The median Debt-to-Equity among Industrial Products companies is 0.29, based on 2,688 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Global TEK Fabrication Co's current Debt-to-Equity of 0.81 is 179.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Global TEK Fabrication Co and its competitors. For the Industrial Products industry, the median Debt-to-Equity is 0.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Global TEK Fabrication Co's current Debt-to-Equity is 0.81, which is 14% above median its own 10-year median of 0.71. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Global TEK Fabrication Co stock overvalued right now?
Based on GuruFocus' analysis, Global TEK Fabrication Co (TPE:4566) is currently considered Fairly Valued. The stock's GF Value™ is NT$65.68, compared to a current price of NT$65.70 — trading 0% above its estimated fair value. The current Debt-to-Equity is 0.81, which is 14% above median its 10-year median of 0.71 and 179.3% above the Industrial Products industry median of 0.29. Global TEK Fabrication Co's overall GF Score™ is 78/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Global TEK Fabrication Co (TPE:4566), the current Debt-to-Equity is 0.81 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Global TEK Fabrication Co (TPE:4566) Overvalued in 2026?
Based on GuruFocus' analysis, Global TEK Fabrication Co stock appears to be overvalued.
The current stock price of NT$65.70 is trading 0% above its estimated GF Value™ of NT$65.68.
GuruFocus considers Global TEK Fabrication Co to be Fairly Valued.
Key valuation signals for TPE:4566:
Debt-to-Equity: 0.81 (14% above median its 10-year median of 0.71)
GF Value™: NT$65.68 vs. price of NT$65.70 (0% above fair value)
Industry Position: 179.3% above the Industrial Products median (#2182 of 2688)
No single metric tells the full story. See the TPE:4566 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Global TEK Fabrication Co Ltd is a precision machining manufacturing company. It offers investment casting, precision machining, deep drawing, and surface finishing services. The main products are industrial automatic control parts, communication parts, aviation equipment parts, etc. The company has three segments namely, Automotive, Industrial, and Aviation. The majority of the revenue is earn from automotive segment.
78GF Score
Get the complete analysis for TPE:4566
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4566 has been successfully added to your 
