Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Win Win Precision Technology Co's Debt-to-Equity or its related term are showing as below:
TPE:4949'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0.05 Med: 0.09 Max: 0.81
Current: 0.15
During the past 13 years, the highest Debt-to-Equity Ratio of Win Win Precision Technology Co was 0.81. The lowest was 0.05. And the median was 0.09.
TPE:4949's Debt-to-Equity is ranked better than 62.09% of 910
companies
in the Semiconductors industry
Industry Median: 0.25
vs TPE:4949: 0.15
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Win Win Precision Technology Co Debt-to-Equity Related Terms
Win Win Precision Technology Co Debt-to-Equity Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Win Win Precision Technology Co Debt-to-Equity Chart
TPE:4949 vs FSLR, NXT, ENPH: Debt-to-Equity Comparison
For the Solar subindustry, Win Win Precision Technology Co's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Win Win Precision Technology Co Debt-to-Equity vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Win Win Precision Technology Co's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Win Win Precision Technology Co's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Win Win Precision Technology Co (TPE:4949) has a Debt-to-Equity of 0.15 as of Jun. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Win Win Precision Technology Co and its competitors. This is 67% above median its historical median of 0.09. Over the past decade, Win Win Precision Technology Co's Debt-to-Equity has ranged from 0.05 to 0.81. According to the industry distribution chart, Win Win Precision Technology Co ranks #345 out of 910 companies in the Semiconductors industry, placing it in the top 37.9%.
Is Win Win Precision Technology Co's Debt-to-Equity too high?
Win Win Precision Technology Co's current Debt-to-Equity of 0.15 is 67% above median its 10-year median of 0.09. Over the past 10 years, this metric has ranged from a low of 0.05 to a high of 0.81. The Semiconductors industry median Debt-to-Equity is 0.25. Win Win Precision Technology Co's value of 0.15 is 40% below this industry median. Based on the distribution chart, Win Win Precision Technology Co ranks #345 out of 910 companies in the Semiconductors industry, which is above the industry midpoint. Overall, Win Win Precision Technology Co has a GF Score™ of 57/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Win Win Precision Technology Co's Debt-to-Equity compare to FSLR and NXT?
According to the Semiconductors industry distribution chart, Win Win Precision Technology Co ranks #345 out of 910 companies for Debt-to-Equity. This puts Win Win Precision Technology Co in the upper half of its industry. The industry median Debt-to-Equity is 0.25. Win Win Precision Technology Co's value of 0.15 is 40% below this benchmark. Historically, Win Win Precision Technology Co's own Debt-to-Equity has ranged from 0.05 to 0.81 over the past decade. While the company's 10-year median is 0.09 vs. the industry median of 0.25, Win Win Precision Technology Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for a Semiconductors company?
The median Debt-to-Equity among Semiconductors companies is 0.25, based on 910 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Win Win Precision Technology Co's current Debt-to-Equity of 0.15 is 40% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Win Win Precision Technology Co and its competitors. For the Semiconductors industry, the median Debt-to-Equity is 0.25 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Win Win Precision Technology Co's current Debt-to-Equity is 0.15, which is 67% above median its own 10-year median of 0.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Win Win Precision Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Win Win Precision Technology Co (TPE:4949) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$27.77, compared to a current price of NT$74.40 — trading 167.9% above its estimated fair value. The current Debt-to-Equity is 0.15, which is 67% above median its 10-year median of 0.09 and 40% below the Semiconductors industry median of 0.25. Win Win Precision Technology Co's overall GF Score™ is 57/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Win Win Precision Technology Co (TPE:4949), the current Debt-to-Equity is 0.15 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Win Win Precision Technology Co (TPE:4949) Overvalued in 2026?
Based on GuruFocus' analysis, Win Win Precision Technology Co stock appears to be overvalued.
The current stock price of NT$74.40 is trading 167.9% above its estimated GF Value™ of NT$27.77.
GuruFocus considers Win Win Precision Technology Co to be Significantly Overvalued.
Key valuation signals for TPE:4949:
Debt-to-Equity: 0.15 (67% above median its 10-year median of 0.09)
GF Value™: NT$27.77 vs. price of NT$74.40 (167.9% above fair value)
Industry Position: 40% below the Semiconductors median (#345 of 910)
No single metric tells the full story. See the TPE:4949 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Win Win Precision Technology Co Ltd and its subsidiaries are mainly engaged in manufacturing solar photovoltaic modules, system design, planning, and integration services, as well as consumable parts of equipment for the semiconductor industry, and maintenance services. The Group's operating segments are: Solar energy and Semiconductor. Maximum revenue is generated from the Semiconductor segment, which manufactures semiconductor component consumables made of tungsten, molybdenum, ceramics, and graphite, which are widely used in end markets such as foundry fabs, DRAM fabs, and panel factories. Additionally, it offers related refurbishment and repair services. Geographically, the Group generates maximum revenue from Taiwan, followed by Europe, and other regions.
57GF Score
Get the complete analysis for TPE:4949
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4949 has been successfully added to your 
