Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
E10 is a concept invented by Prof. Robert Shiller, who uses E10 for his Shiller P/E calculation. E10 is the average of the inflation adjusted earnings of a company over the past 10 years.
Shibaura Machine Co's adjusted earnings per share data for the three months ended in Mar. 2026 was $-0.244. Add all the adjusted EPS for the past 10 years together and divide 10 will get our e10, which is $1.67 for the trailing ten years ended in Mar. 2026.
During the past 12 months, Shibaura Machine Co's average E10 Growth Rate was -3.80% per year.
During the past 3 years, the average E10 Growth Rate was 17.80% per year.
During the past 5 years, the average E10 Growth Rate was 13.20% per year.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the E10 growth rate using E10 data.
During the past 13 years, the highest 3-Year average E10 Growth Rate of Shibaura Machine Co was 20.10% per year. The lowest was -5.30% per year. And the median was 8.90% per year.
If a company grows much fast than inflation, E10 may underestimate the company's earnings power. Shiller PE Ratio can seem to be too high even the actual P/E is low.
For the Shiller P/E, the earnings of the past 10 years are inflation-adjusted and averaged. The result is used for P/E calculation. Since it looks at the average over the last 10 years, the Shiller P/E is also called PE10.
The Shiller P/E was first used by professor Robert Shiller to measure the valuation of the overall market. The same calculation is applied here to individual companies.
Shibaura Machine Co's Shiller P/E Ratio of today is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
During the past 13 years, the highest Shiller P/E Ratio of Shibaura Machine Co was 36.02. The lowest was 10.63. And the median was 17.13.
Be Aware
Shiller PE Ratio works better for cyclical companies. It gives you a better idea on the company's real earnings power.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Shibaura Machine Co's Shiller PE Ratio, along with its competitors' market caps and Shiller PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shibaura Machine Co Shiller PE Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shibaura Machine Co's Shiller PE Ratio distribution charts can be found below:
* The bar in red indicates where Shibaura Machine Co's Shiller PE Ratio falls into.
E10 is a concept invented by Prof. Robert Shiller, who uses E10 for his Shiller P/E calculation. When we calculate the today's Shiller P/E ratio of a stock, we use today's price divided by E10.
What is E10? How do we calculate E10?
E10 is the average of the inflation adjusted earnings of a company over the past 10 years. Let's use an example to explain.
If we want to calculate the E10 of Wal-Mart (WMT) for Dec. 31, 2010, we need to have the inflation data and the earnings from 2001 through 2010.
We adjusted the earnings of 2001 earnings data with the total inflation from 2001 through 2010 to the equivalent earnings in 2010. If the total inflation from 2001 to 2010 is 40%, and Wal-Mart earned $1 a share in 2001, then the 2001's equivalent earnings in 2010 is $1.4 a share. If Wal-Mart earns $1 again in 2002, and the total inflation from 2002 through 2010 is 35%, then the equivalent 2002 earnings in 2010 is $1.35. So on and so forth, you get the equivalent earnings of past 10 years. Then you add them together and divided the sum by 10 to get E10.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
For example, Shibaura Machine Co's adjusted earnings per share data for the three months ended in Mar. 2026 was:
Shibaura Machine Co (TSHMF) has a E10 of $1.67 as of Mar. 2026. E10 represents the company's inflation-adjusted earnings per share over a 10-year period. View historical data on Shibaura Machine Co and its competitors.
Is Shibaura Machine Co's E10 too high?
Shibaura Machine Co's current E10 is $1.67. Overall, Shibaura Machine Co has a GF Score™ of 88/100, reflecting its overall financial health beyond just this single metric.
How does Shibaura Machine Co's E10 compare to GEV and ETN?
Shibaura Machine Co's E10 of $1.67 can be compared against companies in the Industrial Products industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good E10 for an Industrial Products company?
A good E10 depends on the Industrial Products industry context. However, E10 should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high E10 mean?
A high E10 can signal that a stock is expensive relative to its fundamentals. E10 represents the company's inflation-adjusted earnings per share over a 10-year period. View historical data on Shibaura Machine Co and its competitors. Shibaura Machine Co's current E10 is $1.67. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shibaura Machine Co stock overvalued right now?
Shibaura Machine Co (TSHMF) has a current E10 of $1.67. The stock's GF Value™ is $21.06, compared to a current price of $26.11 — trading 24% above its estimated fair value. The current E10 is $1.67. Shibaura Machine Co's overall GF Score™ is 88/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is E10 calculated?
E10 is calculated from a company's financial statements. For Shibaura Machine Co (TSHMF), the current E10 is $1.67 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shibaura Machine Co (TSHMF) Overvalued in 2026?
Based on GuruFocus' analysis, Shibaura Machine Co stock appears to be overvalued.
The current stock price of $26.11 is trading 24% above its estimated GF Value™ of $21.06.
Key valuation signals for TSHMF:
E10: $1.67
GF Value™: $21.06 vs. price of $26.11 (24% above fair value)
No single metric tells the full story. See the TSHMF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shibaura Machine Co Ltd is engaged in manufacturing and distribution of molding machineries and machine tools. The business of the company is divided into two segments: molding machinery and machine tools. The company's product portfolio comprises injection molding machines, die-casting machines, plastic extrusion, large-size machine tools, portal-type machine tools, machining centers, horizontal boring machines, and high-precision machines, among others. The company's products are used in manufacturing of computers, automobile engines, transmissions, medical products, high-precision lenses, displays, construction machines, and wind power generation. A vast majority of the company's revenue is generated by the molding machinery segment, and the company earns most of its revenue in Japan.
88GF Score
Get the complete analysis for TSHMF
E10 is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSHMF has been successfully added to your 
