Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Daido Metal CoFRA:69L +3.33%71 3-Year EBITDA Growth Rate is 20.60% as of Jun. 2026, which is 320% above its 10-year median of 4.90. GuruFocus rates FRA:69L with a GF Score™ of 71/100 and a GF Value™ of €3.59. The stock has 3 warning signs investors should review. Among 1,169 Vehicles & Parts companies, Daido Metal Co ranks better than 76.05% on this metric.
During the past 12 months, Daido Metal Co's average EBITDA Per Share Growth Rate was 11.80% per year.
During the past 3 years, the average EBITDA Per Share Growth Rate was 20.60% per year.
During the past 5 years, the average EBITDA Per Share Growth Rate was 11.70% per year.
During the past 10 years, the average EBITDA Per Share Growth Rate was 1.40% per year.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
During the past 13 years, the highest 3-Year average EBITDA Per Share Growth Rate of Daido Metal Co was 115.70% per year. The lowest was -33.10% per year. And the median was 4.90% per year.
Daido Metal Co (FRA:69L) 3-Year EBITDA Growth Rate Explanation
EBITDA per Share is the amount of Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) per outstanding share of the company's stock.
Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) is what the company earns before it expenses interest, taxes, depreciation and amortization.
Daido Metal Co 3-Year EBITDA Growth Rate Related Terms
FRA:69L vs ORLY, AZO, GPC: 3-Year EBITDA Growth Rate Comparison
For the Auto Parts subindustry, Daido Metal Co's 3-Year EBITDA Growth Rate, along with its competitors' market caps and 3-Year EBITDA Growth Rate data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Daido Metal Co 3-Year EBITDA Growth Rate vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Daido Metal Co's 3-Year EBITDA Growth Rate distribution charts can be found below:
* The bar in red indicates where Daido Metal Co's 3-Year EBITDA Growth Rate falls into.
Daido Metal Co 3-Year EBITDA Growth Rate Calculation
This is the 3-year average growth rate of EBITDA per Share. The growth rate is calculated using exponential compounding based on the latest four year annual data.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
What does a 3-Year EBITDA Growth Rate of 20.60% mean?
Daido Metal Co (FRA:69L) has a 3-Year EBITDA Growth Rate of 20.60% as of Jun. 2026. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Daido Metal Co and its competitors. This is 320% above median its historical median of 4.90. According to the industry distribution chart, Daido Metal Co ranks #280 out of 1169 companies in the Vehicles & Parts industry, placing it in the top 24%.
Is Daido Metal Co's 3-Year EBITDA Growth Rate too high?
Daido Metal Co's current 3-Year EBITDA Growth Rate of 20.60% is 320% above median its 10-year median of 4.90. The Vehicles & Parts industry median 3-Year EBITDA Growth Rate is 6.90. Daido Metal Co's value of 20.60% is 198.6% above this industry median. Based on the distribution chart, Daido Metal Co ranks #280 out of 1169 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, Daido Metal Co has a GF Score™ of 71/100, reflecting its overall financial health beyond just this single metric.
How does Daido Metal Co's 3-Year EBITDA Growth Rate compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Daido Metal Co ranks #280 out of 1169 companies for 3-Year EBITDA Growth Rate. This places Daido Metal Co in the top 24% of its industry — outperforming the majority of peers. The industry median 3-Year EBITDA Growth Rate is 6.90. Daido Metal Co's value of 20.60% is 198.6% above this benchmark. While the company's 10-year median is 4.90 vs. the industry median of 6.90, Daido Metal Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 3-Year EBITDA Growth Rate for a Vehicles & Parts company?
The median 3-Year EBITDA Growth Rate among Vehicles & Parts companies is 6.90, based on 1,169 companies in the industry. Companies in the top quartile (top 25%) have a 3-Year EBITDA Growth Rate significantly above this median, while those in the bottom quartile fall well below. However, 3-Year EBITDA Growth Rate should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Daido Metal Co's current 3-Year EBITDA Growth Rate of 20.60% is 198.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 3-Year EBITDA Growth Rate mean?
A high 3-Year EBITDA Growth Rate can signal that a stock is expensive relative to its fundamentals. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Daido Metal Co and its competitors. For the Vehicles & Parts industry, the median 3-Year EBITDA Growth Rate is 6.90 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Daido Metal Co's current 3-Year EBITDA Growth Rate is 20.60%, which is 320% above median its own 10-year median of 4.90. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Daido Metal Co stock overvalued right now?
Daido Metal Co (FRA:69L) has a current 3-Year EBITDA Growth Rate of 20.60%. The stock's GF Value™ is €3.59, compared to a current price of €6.20 — trading 72.7% above its estimated fair value. The current 3-Year EBITDA Growth Rate is 20.60%, which is 320% above median its 10-year median of 4.90 and 198.6% above the Vehicles & Parts industry median of 6.90. Daido Metal Co's overall GF Score™ is 71/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 3-Year EBITDA Growth Rate calculated?
3-Year EBITDA Growth Rate is calculated from a company's financial statements. For Daido Metal Co (FRA:69L), the current 3-Year EBITDA Growth Rate is 20.60% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Daido Metal Co (FRA:69L) Overvalued in 2026?
Based on GuruFocus' analysis, Daido Metal Co stock appears to be overvalued.
The current stock price of €6.20 is trading 72.7% above its estimated GF Value™ of €3.59.
Key valuation signals for FRA:69L:
3-Year EBITDA Growth Rate: 20.60% (320% above median its 10-year median of 4.90)
GF Value™: €3.59 vs. price of €6.20 (72.7% above fair value)
Industry Position: 198.6% above the Vehicles & Parts median (#280 of 1169)
No single metric tells the full story. See the FRA:69L stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Daido Metal Co Ltd manufactures and sells a variety of bearings including automobile engine bearings and large ship engine bearings. The company has a production and sales network in the five-hub system of Japan, North America, Europe, Asia, and China. It manufactures bearings for trucks, construction and agricultural machinery, and bearings for automobile parts such as turbochargers and shock absorbers. Its products portfolio includes metal-polymer bearings, metallic bearings, engine bearing, turbomachinery bearing systems, modular products, pump, centralized lubrication, capacitors and semi-dry processing which are used in including automotive, marine, construction machinery, agricultural machines, industrial, energy, infrastructure and transportation, leisure, and household appliances.
71GF Score
Get the complete analysis for FRA:69L
3-Year EBITDA Growth Rate is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:69L has been successfully added to your 
