Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Hindustan CompositesBOM:509635 -4.14%74 EBITDA Margin % is 12.67% as of Jun. 2026, which is 20% below its 10-year median of 15.82. GuruFocus rates BOM:509635 with a GF Score™ of 74/100 and a GF Value™ of ₹456.20 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 1,325 Vehicles & Parts companies, Hindustan Composites ranks better than 71.7% on this metric.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Hindustan Composites EBITDA Margin % Related Terms
Hindustan Composites EBITDA Margin % Historical Data
* Premium members only.
The historical data trend for Hindustan Composites's EBITDA Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:509635 vs ORLY, AZO: EBITDA Margin % Comparison
For the Auto Parts subindustry, Hindustan Composites's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Hindustan Composites EBITDA Margin % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Hindustan Composites's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Hindustan Composites's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Hindustan Composites (BOM:509635) has a EBITDA Margin % of 12.67% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Hindustan Composites and its competitors. This is 20% below median its historical median of 15.82. Over the past decade, Hindustan Composites' EBITDA Margin % has ranged from 10.37 to 23.12. According to the industry distribution chart, Hindustan Composites ranks #375 out of 1325 companies in the Vehicles & Parts industry, placing it in the top 28.3%.
Is Hindustan Composites' EBITDA Margin % too high?
Hindustan Composites' current EBITDA Margin % of 12.67% is 20% below median its 10-year median of 15.82. Over the past 10 years, this metric has ranged from a low of 10.37 to a high of 23.12. The Vehicles & Parts industry median EBITDA Margin % is 9.21. Hindustan Composites' value of 12.67% is 37.6% above this industry median. Based on the distribution chart, Hindustan Composites ranks #375 out of 1325 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, Hindustan Composites has a GF Score™ of 74/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Hindustan Composites' EBITDA Margin % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Hindustan Composites ranks #375 out of 1325 companies for EBITDA Margin %. This puts Hindustan Composites in the upper half of its industry. The industry median EBITDA Margin % is 9.21. Hindustan Composites' value of 12.67% is 37.6% above this benchmark. Historically, Hindustan Composites' own EBITDA Margin % has ranged from 10.37 to 23.12 over the past decade. While the company's 10-year median is 15.82 vs. the industry median of 9.21, Hindustan Composites has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Vehicles & Parts company?
The median EBITDA Margin % among Vehicles & Parts companies is 9.21, based on 1,325 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Hindustan Composites's current EBITDA Margin % of 12.67% is 37.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Hindustan Composites and its competitors. For the Vehicles & Parts industry, the median EBITDA Margin % is 9.21 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Hindustan Composites's current EBITDA Margin % is 12.67%, which is 20% below median its own 10-year median of 15.82. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Hindustan Composites stock overvalued right now?
Based on GuruFocus' analysis, Hindustan Composites (BOM:509635) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹456.20, compared to a current price of ₹410.00 — trading 10.1% below its estimated fair value. The current EBITDA Margin % is 12.67%, which is 20% below median its 10-year median of 15.82 and 37.6% above the Vehicles & Parts industry median of 9.21. Hindustan Composites' overall GF Score™ is 74/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Hindustan Composites (BOM:509635), the current EBITDA Margin % is 12.67% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Hindustan Composites (BOM:509635) Overvalued in 2026?
Based on GuruFocus' analysis, Hindustan Composites stock appears to be undervalued.
The current stock price of ₹410.00 is trading 10.1% below its estimated GF Value™ of ₹456.20.
GuruFocus considers Hindustan Composites to be Modestly Undervalued.
Key valuation signals for BOM:509635:
EBITDA Margin %: 12.67% (20% below median its 10-year median of 15.82)
GF Value™: ₹456.20 vs. price of ₹410.00 (10.1% below fair value)
Industry Position: 37.6% above the Vehicles & Parts median (#375 of 1325)
No single metric tells the full story. See the BOM:509635 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Hindustan Composites Ltd is engaged in the business of manufacturing and marketing fiber-based friction materials. The company serves various industries, such as automotive, railways, engineering, mining, aerospace, steel, chemicals, oil exploration, and others. It offers friction materials such as Brake lining, Roll lining, Clutch facing, Disc Brake Pad, Brake Block, and others. It also offers industrial thrust bearing and insulation products comprising Millboard sheets, Millboard discs, and Competitors. Geographically, the group operates throughout the regions of India and derives revenue through the sale of its products. The group has two segments: Composite products and Investments. Composite product is the key revenue-generating segment.
74GF Score
Get the complete analysis for BOM:509635
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:509635 has been successfully added to your 
